Table of Contents
72 x 36 – Shower Pans – Showers – The Home Depot.
What is the largest shower pan size?
The basic dimensions of a shower pan can range from 32″ x 32″, all the way up to 42″ x 60″.
What is the biggest shower base you can get?
Standard square or rectangular shower base pans range in size from 32-by-32 inches to 60-by-42 inches. There are also standard neo-angle base pans for corner showers that range from 36 inches to 60 inches in diameter.
What size shower bases are available?
Shower bases are also known as pans or trays and they protect the floor from moisture under your shower. Sizes are standardized for traditional showers ranging from 32 to 60 inches and may be used with select walls. Available in rectangular, square or corner configurations with a pre-drilled hole for the drain.
What is the difference between a shower base and a shower pan?
What Do They Do? While a shower pan and a shower base both channel water into the drain, there’s one key difference: “Shower pan” is the actual shower floor that you step on, whereas “shower base” refers to the structure underneath the shower itself.
How deep should a shower pan be?
Thickness for Concrete Shower Pan – Base Layer The shower pan base mortar layer thickness should be approximately ½ to 1 inch thick. Since the shower floor already has a pre-slope, just apply a base mortar layer that has an even thickness throughout the shower floor area.
How long should a shower pan last?
Most times, you can expect your shower pan to last between five and ten years. Like a shower’s base, its pan also needs to be replaced every so often, depending on how much you use it.
Do shower pans come in different sizes?
Shower pans come in all shapes and sizes for different bathroom dimension needs. These bathroom pieces are essential because they direct the water from the shower to the drain. In contrast to what many would presume, shower pans do not have a universal size.
Do shower pans come in all sizes?
Shower Pan Options: Shapes and Sizes Shower pans come in all different types of shapes, angles and sizes to fit any bathroom. Whether you need a neo-angle pan for a corner shower, a small 30” x 30” square, or a larger pan for a tub retrofit, Bestbath has a large selection to choose from.
Can you put tile over a shower pan?
In a typical installation, the shower pan is set into a bed of mortar to level it and to secure it to the subfloor. You cannot tile over standard polymer or fiberglass shower pans because they flex too much and will eventually crack the tile grout and possibly even the tile itself.
How wide is a standard shower floor?
A standard full-size shower base is usually 30 inches wide and 60 inches long. This size shower base fits into any typical, standard home bath or shower area with few modifications required to the surrounding shower walls.
Which shower base is best?
4 of the Best Shower Base Flooring Options Tile Shower Bases. You may decide that you want to tile the floor of your shower to match the walls or bathroom floor tile. Molded Stone Shower Bases. Molded stone shower pans can offer you another high-end and elegant solution. Acrylic Shower Pans. Fiberglass Shower Pans.
Do plumbers install shower pans?
Some areas require the plumber to install it by code. That still doesn’t excuse the pan from being sloped. This is covered in SEVERAL places, including the IRC (International Residential Code), The Universal Plumbers Code, as well as ANSI Specs governing the construction of a tile shower pan.
How much does it cost to have a shower pan installed?
According to Porch.com, the average cost to install a shower pan is about $1,550 for both labor and materials. Typical costs can range from about $1,000 to $2,000, depending on where you live and the type of shower pan you choose.
Do you need a shower base and shower pan?
If you plan to install a tile floor in your shower, a shower pan is crucial because it provides a waterproof surface to lay the tile on. Even if you don’t plan to use tile, a shower pan is important for protecting your floor and subfloor from any leaks that may get through.
Do I need wire mesh in shower pan?
Technically, you don’t need metal lath in your shower base or around the pan. Though metal lath helps anchor mortar used in building up a shower base and pan, the mortar itself should prevent deterioration of the shower floor.
What type of concrete do I use for a shower pan?
The best concrete mix for shower pans is made by Quikrete. They make two products, the first is called Floor Mud, the 2nd is their Sand/Topping mix. Both work great for building a shower pan. Just like other types of concrete mix, there are DIY options.
How thick should shower floor mud bed?
The thickness should be between 3/4″ and 1-1/4″ (19.1 and 31.8 mm). A minimum of 1-1/4″ (31.8 mm) thickness is required for shower receptors. Shower stall areas also require a suitable waterproofing membrane and reinforcement. Consult local building codes, ordinance and trade practices.
