Table of Contents
In induction motor, slip is important because slip determines torque and also the machine behaviour. Explained as follows: (1) Torque depends on rotor power factor which, in turn, depends on slip. So, torque is lowest when slip(s) is equal to 1 i.e. at standstill.
What is the significance of slip?
Importance of Slip Hence, torque is directly proportional to slip. The above equation shows that the torque induces on the rotor is directly proportional to the slip of the induction motor. The high value of slip induces the emf in the rotor. This EMF develops the heavy torque on the rotor conductors.
What is the effect of slip on the working of an induction motor?
Slip increases with increasing load – providing a greater torque. It is common to express the slip as the ratio between the shaft rotation speed and the synchronous magnetic field speed.Number of poles, frequencies and synchronous induction motor speed.
- Cached
| No. of Magnetic Poles | Frequency (Hz) | |
|---|---|---|
| 50 | 60 | |
| 16 | 375 | 450 |
| 20 | 300 | 360 |
What are the advantages and disadvantages of squirrel cage induction motor?
Squirrel Cage Induction motors are cheaper in cost compared to Slip Ring Induction motors. Requires less maintenance and rugged construction. Because of the absence of slip rings, brushes maintenance duration and cost associated with the wear and tear of brushes are minimized.
What is a high slip motor?
A high slip motor allows the torque to increase torque per amps even as the motor moves from fixed speed to the locked rotor state. Standard NEMA Design A, B, or C motors operate at one to five percent slip. A NEMA D motor has a high slip of five to thirteen percent.
Do synchronous motors have slip?
Synchronous motor is a machine whose rotor speed and the speed of the stator magnetic field is equal. Synchronous motor does not have slip.
What is the slip?
A slip is a woman’s undergarment worn beneath a dress or skirt. A full slip hangs from the shoulders, usually by means of narrow straps, and extends from the breast to the fashionable skirt length. A half slip (or waist slip) hangs from the waist.
What is normal slip of an induction motor?
Because of this speed difference, the motor rotates at a speed slightly slower than the synchronous speed. Slip is normally expressed in percentage. Slip of a power induction motor is 2 to 3% when the motor is operated under the rated load.
What causes motor slip?
The interaction of currents flowing in the rotor bars and the stators’ rotating magnetic field generate torque. In actual operation, rotor speed always lags the magnetic field’s speed, allowing the rotor bars to cut magnetic lines of force and produce useful torque. This speed difference is called slip speed.
When slip is zero rotor will?
If Slip is equal to zero, rotor current is zero and torque is zero. The zero torque means motor will not rotate at all.
What is slip and what is the importance of slip in an induction motor?
In induction motor, slip is important because slip determines torque and also the machine behaviour. Explained as follows: (1) Torque depends on rotor power factor which, in turn, depends on slip. So, torque is lowest when slip(s) is equal to 1 i.e. at standstill.
What is full load slip?
At full load the speed of the motor is 1350 rpm. Hence slip at full load = 5.33% When the motor is so loaded that the rotor speed is reduced to 0, the value of Slip is 1. Hence, value of Slip gradually increases from no-load to full load.
What is the value of slip at starting?
Slip in Induction Motor is the relative speed between the rotating magnetic flux and rotor expressed in terms of per unit synchronous speed. It is a dimensionless quantity. The value of slip in induction motor is can never be zero.
Can slip be negative?
If the rotor of an induction machine rotates above synchronous speed, slip is negative, as are torque, mechanical output power and air gap power. If slip is negative, the “input power” to the electrical terminals will be negative, implying that power is flowing out of the electrical terminals.
What happens if slip of induction motor is 1?
When the Value of Slip is >1 If the slip value of the motor is greater than one then the rotor will turn in the opposite direction to the revolution of magnetic flux. So if the magnetic flux is revolving in the direction of clockwise, then the rotor will turn rotating in the anti-clockwise direction.
What is the value of slip at stand still?
When the motor is at standstill, the relative speed of the rotating magnetic field and the rotor is equal to 1. The difference in the synchronous speed of the motor and the actual speed of the rotor is unity. In other words, the slip of the motor is unity when the rotor is at standstill.
What is Torque slip?
The torque slip curve for an induction motor gives us the information about the variation of torque with the slip. The slip is defined as the ratio of difference of synchronous speed and actual rotor speed to the synchronous speed of the machine.
Why there is no slip in synchronous motor?
Because the rotor turns at the same speed as synchronous speed (speed of the rotating magnetic field), there is no slip. The speed of rotation of the motor is constant in a synchronous motor, and does not vary with load, as in an induction motor.
What happens when slip is zero?
Zero slip means that rotor speed is equal to synchronous speed. If rotor is rotating at synchronous speed in the direction of rotating magnetic field the, there will be no flux cutting action, no emf in the rotor conductors, no current in rotor bar conductor and hence no development of electromagnetic torque.
What is slip and write its significance?
Importance of Slip in Induction Motor. In the induction motor rotor always rotates speed less than synchronous speed. The difference between the rotor speed (N) and the rotating magnetic flux speed (Ns) is called slip.
How is slip of a motor calculated?
The multiplication of 100 and speed difference divided by the synchronous speed is known as slip of an induction motor. It’s always represented in percentage, generally it ranges from 0.4% to 6% based on its design factors.
Why must slip be present for Motor Action?
Because of the above phenomenon, the rotor speed “N” is always less than the synchronous speed “Ns” which keeps the motor moving. This difference between synchronous speed of the rotating magnetic field and synchronous speed is known as slip. Hence slip is an essential feature for proper working of the induction motor.
