Table of Contents
Coagulants and flocculation processes are used to remove colloidal impurities: suspended particles such as bacteria, clay, silts, and organic matter from the contaminated water. This produces large flock aggregates that can be removed from the water in subsequent clarification/filtration processes.
What is the function of coagulant?
What are coagulants used for? In water treatment, coagulants are used to remove a wide variety of hazardous materials from water, ranging from organic matter and pathogens, to inorganics and toxic materials, like arsenic, chemical phosphorous and fluoride.
What are the coagulants used for treatment of drinking water?
The aluminum coagulants include aluminum sulfate, aluminum chloride and sodium aluminate. The iron coagulants include ferric sulfate, ferrous sulfate, ferric chloride and ferric chloride sulfate. Other chemicals used as coagulants include hydrated lime and magnesium carbonate.
Is coagulation good or bad?
Blood clotting is a natural process; without it, you would be at risk of bleeding to death from a simple cut. Blood clots inside the cardiovascular system are not always so welcome. A clot in the coronary arteries near the heart can cause a heart attack; one in the brain or the arteries serving it, a stroke.
Is na2so4 a coagulant?
Sodium sulfate is a well-known coagulant for PVA, and it is used in the coagulation bath of PVA before wet spinning of vinylon fibers.
What is coagulant Tagalog?
Translation for word Coagulate in Tagalog is : pamumuo.
What is coagulant example?
Examples of primary coagulants are metallic salts, such as aluminum sulfate (referred to as alum), ferric sulfate, and ferric chloride. Cationic polymers may also be used as primary coagulants.
What are the 4 steps of coagulation?
1) Constriction of the blood vessel. 2) Formation of a temporary “platelet plug.” 3) Activation of the coagulation cascade. 4) Formation of “fibrin plug” or the final clot.
How do you choose coagulant?
The choice of inorganic coagulant should be one that quickly generates the Al(OH)3 sweep floc and will form a stable sludge bed. In moderate turbidity waters (<100 NTU) the use of a general purpose inorganic salt is preferred, and most will be successful if the other conditions are right.
How the coagulant works in jar test?
The jar test involves exposing same volume samples of the water to be treated to different doses of the coagulant and then simultaneously mixing the samples at a constant rapid mixing time. The microfloc formed after coagulation further undergoes flocculation and is allowed to settle.
What happens during coagulation?
Blood clots and coagulation Blood vessels shrink so that less blood will leak out. Tiny cells in the blood called platelets stick together around the wound to patch the leak. Blood proteins and platelets come together and form what is known as a fibrin clot. The clot acts like a mesh to stop the bleeding.
What is the most common coagulant in water treatment?
Aluminum and iron salts are the most commonly used inorganic coagulants in the wastewater treatment settings.
Is gypsum a flocculant?
Gypsum can coagulate or bridge clay particles, which accelerates settling. Flocculants should be used to prevent damage to sensitive water resources such as ponds, lakes and trout streams or whenever turbidity control is required. The best thing to do is a jar or bucket test using slightly varying rates of gypsum.
What is a coagulant and why is it used?
Coagulants are used to increase the size of aquatic substances, making them large enough to settle or to be removed by sand, dual layer filtration, or the membrane.
What is a coagulant drug?
Coagulation modifiers are drugs that act on the blood coagulation pathway in different places to prevent or promote blood clot formation. Anticoagulants and antiplatelet drugs are used to prevent blood clot formation.
What is meant by flocculant?
A flocculant is a compound or agent which is added to a vessel to make particles stick together and form larger particles. Flocculants are added to encourage floc formation and enhance settling and compression rates. Flocculation involves the addition of a flocculant that causes the particles to stick together.
Why alum is used as coagulant?
When alum is added to water, it reacts with the water and results in positively charged ions. Coagulation removes colloids and suspended solids from the water. These particles have a negative charge, so the positively charged coagulant chemicals neutralize them during coagulation.
Which is not a coagulant?
∴ Sodium sulphate is not a coagulant.
What is the best coagulant?
Chemical Coagulants Used In Water Treatment Aluminum Sulfate (Alum) – One of the most commonly used water treatment chemicals in the world. Aluminum Chloride – A second choice to Alum as it is more expensive, hazardous and corrosive. Polyaluminum Chloride (PAC) & Aluminum Chlorohydrate (ACH).
What are natural coagulants?
They are mainly composed of polymers of natural origin extracted from plants, algae or animals. Among these are polysaccharides and water soluble substances that act as coagulation and / or flocculation agents.
What is meant by coagulant?
Coagulants are a substance which cause particles in a liquid to curdle and clot together. Coagulants carry the opposite charge to the particles and therefore cause the charge to ‘destabilise’ when added to the water; resulting in the particles clinging together.
What two chemicals are commonly used as water coagulants?
Aluminum sulfate (alum) is the most common coagulant used for water purification. Other chemicals, such as ferric sulfate or sodium aluminate, may also be used.
What triggers coagulation?
Coagulation begins almost instantly after an injury to the endothelium lining a blood vessel. Exposure of blood to the subendothelial space initiates two processes: changes in platelets, and the exposure of subendothelial tissue factor to plasma factor VII, which ultimately leads to cross-linked fibrin formation.
What is the difference between coagulant and flocculant?
Flocculants differ from coagulants in that they are often polymers, whereas coagulants are typically salts. Generally speaking, anionic flocculants are used to catch mineral particles while cationic flocculants can capture organic particles.
How turbidity can be removed?
These options mechanically (through filtration) or chemically (through flocculation and settling of suspended material) remove particles and reduce turbidity.
What is coagulant made of?
Chemically, coagulant chemicals are either metallic salts (such as alum) or polymers. Polymers are man-made organic compounds made up of a long chain of smaller molecules. Polymers can be either cationic (positively charged), anionic (negatively charged), or nonionic (neutrally charged.)
Is Lime a coagulant?
Lime (Ca(OH)2 or CaO): Lime, or calcium hydroxide, is predominantly used to adjust pH, but as a softener, it can also be used as a coagulant aid. The lime bonds with the other particles and increases the size/weight of the flocs which then increases the speed with which they settle out of the water.
