Table of Contents
Use the formula. Calculating the volume for concrete requires using three dimensions: length times width (which is area) times the height (thickness) or L x W x H. If you are using feet as your standard unit of measurement, this formula will give you the volume of concrete in cubic feet.
How do you figure a yard of concrete?
How do I calculate how much concrete I need for a slab? Measure the area in feet. Multiply length by width, and then by thickness. Divide the resulting number by 27 to find cubic yards.
How do I figure how much concrete I need?
Multiply the width times the length times the height (W × L × H), or use our volume calculator to find the cubic feet. Convert the volume to cubic yards from cubic feet. To do so, divide the cubic footage by 27 to get the yards of concrete needed.
How many square feet is a yard of concrete 6 inches thick?
One Cubic Yard of Concrete: 4-inches thick – covers 81 square feet. 5-inches thick – covers 65 square feet. 6-inches thick – covers 54 square feet.
How many yards of concrete do I need for a 10×10 slab?
The amount you will need for a 10 x 10 slab is 1.3 cubic yards, we always add an extra 10% to allow for any slab depth variations or spills that may occur.
How much ballast and cement do I need calculator?
ballast calculator for concrete:-quantity of ballast for 1m3 concrete is calculated as follows, ballast quantity = 5/6 × 1m3 = 0.833 m3, we know weight of ballast = volume × density, so weight of ballast in kg = 0.833m3 × 1750kg/m3 = 1458kg, if weight of ballast bag is 25kg, then number of bags of 25kg ballast as 1458/.
How do I calculate square feet into yards of concrete?
To convert square feet to cubic yards, you simply multiply your square footage figure by the height or depth of the area (in feet) to get a volume measurement in cubic feet. You then divide the total by 27 to get your measurement in cubic yards.
How many yards of concrete do I need for a 24×24 slab?
For example, for a concrete slab that is 24′ X 24′ X 4”, simply enter 4 in the Thickness/Depth field, 24 in the Width field, and 24 in the Length field. Click “Calculate”. Your answer should be 7.11 yards. Note: The Concrete Volume Calculator can also be used to determine yardage for aggregate products.
How much does it cost to pour a 24×24 slab of concrete?
A typical 24×24 garage slab costs between $3,057 and $5,944 with prices ranging from $5.31 to $8.31 per square foot for a 4” reinforced slab of concrete, and $6.83 to $10.32 per square foot for a 6” slab of reinforced concrete.
How many bags of concrete do I need for a 10×10 slab 4 inches thick?
The thickness of your 10′ x 10′ slab will determine just how many bags you need. The average thickness of a 10′ x 10′ concrete slab for a shed is 4 inches thick. At 4″ thick, your 10 x 10 slab will take 56 bags of concrete that weigh 80 lbs.
How many 80lb bags of concrete make a yard?
One 80lbs bag of Quikrete Concrete Mix will yield approximately . 60 cu ft. So it will take 45 bag to equal one cubic yard of concrete.
Do you need rebar for 4 inch slab?
The thickness of rebar should be no more than 1/8 that of the slab, so a 4” slab shouldn’t have steel greater than #4 or 1/2″ bar. It’s best to check with a Structural Engineer if your slab will bridge or cantilever. What is this? For 4” concrete slabs used for driveways and patios, #3 rebar is common.
How much area does a 40 lb bag of concrete cover?
Regarding this, how much does a 40 lb bag concrete cover, as 133 lb concrete = 1 CF, so a bag of 40 lb concrete = 40/133 = 0.30 CF, therefore, a 40 lb bag concrete approximately cover around 1.8 square feet area upto depth of 3 inch.
How thick do I need my concrete?
Standard concrete floor slab thickness in residential construction is 4 inches. Five to six inches is recommended if the concrete will receive occasional heavy loads, such as motor homes or garbage trucks. To prepare the base, cut the ground level to the proper depth to allow for the slab thickness.
How much aggregate do I need for 1m3 concrete?
1 Cubic Meter of Concrete 1m3 of concrete = 150l water + 250kg cement + 700kg sand + 1200kg aggregates.
How many bags of cement do I need for 1m3 concrete?
Thus, the quantity of cement required for 1 cubic meter of concrete = 0.98/0.1345 = 7.29 bags of cement. The quantities of materials for 1 m3 of concrete production can be calculated as follows: The weight of cement required = 7.29 x 50 = 364.5 kg.
How many bags of ballast are in a cubic meter?
Ballast is coarse aggregate, mixture of small rocks, limestone, crushed gravel and fine sand particles, In this regard, “how many 25kg bags of ballast in a cubic metre”, generally, there are 58 bags of 25kg ballast or 1.7 jumbo bag (bulk bag of 850kg) in a cubic metre concrete by using standard mix of 1:5 (1 cement:5.
How many square feet is 8 cubic yards?
Cubic yard to Square feet Calculator 1 cubic yard = 9 ft 2 0.037 cubic yard 8 cubic yard = 36 ft 2 0.8381 cubic yard 9 cubic yard = 38.9407 ft 2 1 cubic yard 10 cubic yard = 41.7743 ft 2 1.1712 cubic yard 11 cubic yard = 44.5148 ft 2 1.3512 cubic yard.
How do u figure out cubic feet?
Multiply the length, width and height and divide the resulting number by 1,728. This is the container’s volume in cubic feet.
How much does a cubic yard of concrete weigh?
Concrete Weight per Cubic Yard A solid slab of concrete weighs 4,050 pounds per cubic yard. A cubic yard of broken up concrete weighs 2,025 pounds.
