Table of Contents
Flocculation is a process by which a chemical coagulant added to the water acts to facilitate bonding between particles, creating larger aggregates which are easier to separate. The method is widely used in water treatment plants and can also be applied to sample processing for monitoring applications.
What is flocculation in water treatment process?
Flocculation is the separation of a solution, commonly the removal of sediment from a fluid. The term is derived from floc, which means flakes of material; and when a solution has been flocculated, the sediment has formed into larger aggregated flakes, making them easier to see and remove.
What happens flocculation?
Flocculation is a two-step particle aggregation process in which a large number of small particles form a small number large flocs. Small particles usually carry negative surface charges that hinder aggregation and settling (1a). Coagulant chemicals can adsorb to the particles and balance the charges.
What is flocculant for?
Used in a wide range of industries and applications, flocculants help to remove suspended solids from wastewater by aggregating contaminants into flakes or “flocs” that float to the surface of the water or settle at the bottom. They can also be used for lime softening, sludge thickening, and solids dehydration.
What is flocculation value?
Flocculation value is defined as the minimum concentration required of an electrolyte to cause the coagulation or flocculation of a solution. Flocculation value is inversely proportional to the coagulating power of the ion.
Is alum a coagulant or flocculant?
To accomplish this, the water is treated with aluminum sulfate, commonly called alum, which serves as a flocculant. Raw water often holds tiny suspended particles that are very difficult for a filter to catch. Alum causes them to clump together so that they can settle out of the water or be easily trapped by a filter.
What is difference between flocculation and Deflocculation?
The key difference between flocculation and deflocculation is that flocculation is the formation of flocs by the clumping of fine particles, whereas deflocculation is the dispersion of flocs to form a stable colloid. Flocculation refers to the formation of clumps from fine particles in a colloid.
What makes a good flocculant?
Polymers are useful as flocculants because they are robust molecules and sometimes carry charges. Because they are so large, small particles can get trapped in the curves of the polymer causing them to accumulate a mass heavy enough to prevent their retention in solution.
What is an example of flocculation?
Flocculation and coagulation treatment chemicals are used in effluent wastewater water treatment processes for solids removal, water clarification, lime softening, sludge thickening, and solids dewatering. Examples of ChemTreat coagulation products include aluminum salts, iron salts, and polyelectrolytes.
Where is flocculation used?
Flocculation is a process by which a chemical coagulant added to the water acts to facilitate bonding between particles, creating larger aggregates which are easier to separate. The method is widely used in water treatment plants and can also be applied to sample processing for monitoring applications.
Is polymer a coagulant or flocculant?
Polymers (long-chained, high-molecular-weight, organic chemicals) are becoming more widely used. These can be used as coagulant aids along with the regular inorganic coagulants. Anionic (negatively charged) polymers are often used with metal coagulants.
What chemicals are used in flocculation?
Chemicals (coagulants) are added to the water to bring the nonsettling particles together into larger, heavier masses of solids called floc. Aluminum sulfate (alum) is the most common coagulant used for water purification. Other chemicals, such as ferric sulfate or sodium aluminate, may also be used.
How can flocculation be prevented?
When particles of a suspension come close together they can form aggregates called flocculates which will settle more rapidly. To prevent that we often coat the particle with a charged surfactant. The charge (Zeta potential) acts to keep the particles separate and prevent flocculation.
What causes flocculation to occur?
In dispersed clay slurries, flocculation occurs after mechanical agitation ceases and the dispersed clay platelets spontaneously form flocs because of attractions between negative face charges and positive edge charges.
What is the basic principle of flocculation?
Flocculation refers to the process used to bring the coagulated particles together so that they can combine to form larger, settleable, and filterable masses of particles called floc. Zeta potential is defined and its role in coagulation described.
How often can you use flocculant?
You can reuse a clarifier after 5-7 days, but if you’re constantly seeing cloudy water, there may be other problems. Adding too much flocculant can cause its own issues.
What does flocculation mean?
[ flŏk′yə-lā′shən ] n. The process of becoming flocculent. Precipitation from solution in the form of fleecy masses.
What is flocculating power?
Hint: Flocculating value or the coagulating value is the amount of the electrolyte which is needed so that 1 litre of colloidal solution precipitates easily. The coagulating power or flocculating power is the reciprocal of coagulating value or flocculating value.
What is the difference between clarifier and flocculant?
A clarifier is a milder chemical that will take several days to completely clear up a cloudy pool, while a flocculant works almost immediately.
What is flocculation test?
A Flocculation Test Procedure is used to determine how much Flocculants need be added to solids in suspension (slurry or pulp) to cause the individual particles to collect in the form of flocs. Flocculation, i.e. aggregation through the use of long-chain organic polymers that bridge between adjoining particles.
What is the importance of flocculation?
Flocculants improve filtration, leading to an improved cleaning and disinfection of the water. This treatment method is recommended when the filtration system struggles to remove all the floating particles (murky/troubled water).
What is difference between flocculation and coagulation?
Coagulation: Particles that aggregate with themselves e.g. by the influence of a change in pH. Flocculation: Particles that aggregate by the use of polymers that binds them together. Coagulation and flocculation are well-known techniques within wastewater treatment.
What is flocculant made of?
The aluminum-based flocculants include aluminum sulfate, aluminum chloride, sodium aluminate, aluminum chlorohydrate, and polyaluminum chloride. The iron-based flocculants include ferric chloride, ferric sulfate, ferrous sulfate, and ferric chloride sulfate [15, 69].
