Table of Contents
Prepare for the drive home well away from the boat ramp so that you don’t block ramp traffic. While on land at the ramp area, remove and dispose of all weeds from the vessel and trailer, remove the drain plug to release bilge water, and drain any live wells.
When retrieving your boat you should back the trailer?
When it’s your turn to retrieve your boat, back your trailer into the water until two-thirds of its bunks or rollers are submerged. Like launching your boat, you should keep your towing vehicle’s wheels out of the water unless absolutely necessary.
When retrieving a boat at a ramp What should be?
When retrieving, do not pull your vessel into a launch lane until the towing vehicle is at the ramp. The line is formed by vehicles with trailers, not by vessels in the water. Drop off the vehicle driver, and wait offshore and clear of the ramp until he or she arrives with the trailer.
What do you do after pulling a boat out of water?
Drop off the Driver Someone needs to back up the tow vehicle. Drop the driver off and give him/her time to get the trailer in place. Back the trailer up far enough into the water so the boat will easily glide up on the rollers. Put the vehicle in park and leave the engine running.
What equipment is required on a US boat trailer?
At a minimum, each trailer should have working brake lights and turn signals. In addition, most boat trailers must display red side-marker lamps at the rear and amber side-marker lamps or reflectors toward the front. For trailers wider than 80 inches, three red identification lamps are required on the rear crossmember.
What is the first thing you should do after retrieving a boat onto a trailer quizlet?
What is the first thing you should do after retrieving a boat onto a trailer? Pull the trailer well away from the boat ramp. Where should portable gasoline tanks be filled?.
What should you do before fueling your boat?
Shut off all fuel valves and extinguish all open flames, such as galley stoves and pilot lights. Close all windows, ports, doors, and other openings to prevent fumes from entering the boat. Remove portable fuel tanks from the boat and fill them on the dock. Make sure that your fire extinguisher is within reach.
What should you do when operating a boat in large waves and high wind quizlet?
When operating a boat in large waves and high wind you should direct the boat head-on or at a slight angle into the waves whilst reducing your speed. Don’t approach large waves at the beam of your boat, as this can lead to a capsize.
Why should a boats gas tank never be completely filled?
It’s important to never fill the tank of your boat beyond 90% full. This leaves room for gas to expand and avoids the potential for overflow. Ensure that all air vents and valves to the gas tank are open.
What is an important step in fueling process?
Safety First! Turn off engine(s), electronics, and extinguish all open flames. Keep the nozzle in contact with the edge of the fill to prevent build up of static electricity to prevent sparking. Don’t top off your tank. Know how much fuel your tank holds and fill it to about 90%.
Do you need brakes on a boat trailer?
The most-common law requires any trailer weighing more than 3,000 pounds to have brakes, but some states have no rule regarding brakes and others require brakes on all trailers. For trailers with more than one axle, some states require brakes on all axles, some require brakes only on a single axle.
How do you correct trailer sway?
Gradually reduce speed when experiencing trailer sway–do not slam on the brakes. Steady the steering wheel–do not make sudden turns, and do not try to steer out of a sway situation. Do not increase speed, since higher speeds make trailer sway more severe. Apply only the trailer brakes to help reduce sway.
What does a yellow buoy mark?
For those who are paddling or boating on intercoastal waterways, yellow buoys are used to designate a channel. When someone sees a yellow square, this is a sign that they need to keep the buoy to the port side. On the other hand, yellow triangles should stay to the starboard side of the boater.
Which safety precaution should be taken first by boat?
Which safety precaution should be taken first by a boat operator when boating in stormy weather? The boat operator should first make sure that all passengers on board the boat are wearing US Coast Guard approved life jackets or PFDs (personal flotation devices) when boating in stormy weather. That’s the short answer.
What immediate action should you take when operating a boat?
Slow down and turn to starboard. An immediate action you must take when operating a boat and you hear a fog signal of another boat you cannot see? Slow to minimum speed.
What should you do before starting an inboard gasoline engine quizlet?
Before starting an inboard gasoline engine, you should operate the blower for at least 4 minutes and: sniff the blower exhaust for traces of gasoline fumes.
What should you do before fueling your boat quizlet?
What should you do before fueling your boat? Turn off the engine and close all windows, ports, doors, and other openings.
What should you do after fueling your pleasure craft and before starting the engine?
Wipe up any spilled fuel and properly dispose of the used paper towels or rags on shore. Open all windows, ports, doors, and other openings. If your pleasure craft is equipped with a power ventilation system (exhaust blower), turn it on for at least four minutes before starting your engine.
What safety precaution should you take when fueling a gas powered boat?
While filling the fuel tank: Keep the nozzle of the fuel-pump hose in solid contact with the tank opening to prevent producing a static spark. Use caution and fill the tank slowly to avoid spilling fuel into the boat’s bilge or into the water. Use an oil-absorbent pad to catch drips or spills.
What should you do before leaving the dock?
Boat Safety 101: Safety Check Before You Leave the Dock Check the weather. Make sure you are not heading into heavy storms or severe conditions. Let someone know your plans. The old buddy system. Test your equipment. Inspect fluids. Dry the bilge. Ventilate all areas.
