Table of Contents
Unlike unmodified mortar, which consists only of a blend of Portland cement, sand, and water retention agents, modified thinset includes additional retention products, such as latex polymers, which can increase its performance and strength.
What happens if you use modified thinset on Kerdi?
Modified thinset mortars aren’t recommended for use with Kerdi because they must dry out to gain strength, whereas the membrane inhibits drying, which can lead to unpredictable results. Schluter’s recommendation is to use unmodified thinset mortar when installing Kerdi over most shower substrates.
Is modified thinset better than unmodified?
Modified thinset is the product of choice for most tile installations because of its increased strength and bonding with minimal shrinkage, which means a reduced chance of cracks forming in the tile. WarmlyYours Radiant Heating recommends modified thinset mortar for nearly all tile and stone installations.
Can you use unmodified thinset on porcelain tile?
Portland cement-based unmodified thin-set mortars are dependent on the presence of moisture for hydration in order to gain strength. Therefore, extended cure times would be required before grouting if using modified thin-set mortars between DITRA and ceramic tile, including porcelain tile.
What is the best thinset for backer board?
MongoCT. An unmodified thinset (Masterblend) is fine between the Hardi and the subfloor. The reason for the layer of thinset between the cement board and the subfloor is to fill the voids/gaps between the two. It’ll keep the cement board from moving up and down.
What does unmodified thinset mean?
In general, unmodified thin-set mortar is a blend of Portland cement, sand, and water retention agents that is mixed with water by the user. 1 when mixed with water). Unmodified thin-set mortar may also be referred to as dry-set mortar by the manufacturer.
Which Thinset over KERDI?
Schluter SET™, ALL-SET™, FAST-SET™ or an unmodified thin-set mortar must be used to construct all KERDI seams to ensure watertightperformance of the system.
Why does KERDI require unmodified thinset?
Portland cement-based unmodified thin-set mortars are dependent on the presence of moisture for hydration in order to gain strength. Since KERDI is impervious, it does not deprive the mortar of its moisture. This allows the cement to properly hydrate, resulting in a strong, dense bond coat.
Which Mapei Thinset is unmodified?
Keraset: This is Mapei’s mid-range unmodified.
Is Mapei premium mortar modified?
Polymer-modified, cement-based mortars such as MAPEI’s Large Tile & Stone Mortar are generally recommended for installing tile over radiant-heat systems. Refer to the written instructions of the radiant-heat manufacturer for recommendations of cement-based mortars.
Can you mix modified and unmodified thinset together?
Unmodified thinset has been around forever. More than that, you don’t have to mix some types of modified thinset with water before spreading it out on the subfloor. That translates into less work for you and sturdier concrete for the client.
What type of thinset is best for porcelain tile?
ANSWER – Porcelain Tile should be installed with a latex modified thin-set or a polymer modified thin-set. The Custom Marble Granite Mortar I believe is a polymer modified thin-set. For larger tiles 12×12 or larger should use a 1/4″ sq. notch trowel.
Is Mapei porcelain tile mortar modified?
Porcelain Tile Mortar is a regular-setting, polymer-enriched (“modified”) mortar for installing a wide range of tile and stone over a diverse range of substrates in thin-set applications.
Can you use modified thinset over redguard?
What Kind Of Thinset Do I Use Over Redguard? A person should use a modified thinset like Flexbond over Redgard, since the Flexbond modified thinset lists redgard as one of the surfaces it can be applied to.
How thick should thinset be for shower walls?
In most installations, a layer of thinset 3/16 to 1/8-inch thick is sufficient. Too much thinset creates a mess and inhibits proper bonding between the tile and the substrate. For most tiles, apply a layer of thinset 3/16–1/8-inch thick.
Is Mapei Type 1 modified?
Polymer-modified, cement-based mortars such as MAPEI’s Large Tile & Stone Mortar are generally recommended for installing tile over radiant-heat systems. Refer to the written instructions of the radiant-heat manufacturer for recommendations of cement-based mortars.
Can I use unmodified thinset under DITRA?
To set DITRA over concrete or gypsum, Schluter-Systems recommends an unmodified thin-set mortar meeting the requirements of ANSI A118. 1. Please consult the Schluter-DITRA Installation Handbook before beginning your tile project to confirm the proper materials selection.
Can you use unmodified thinset on plywood?
Thinset is the wet base that you first trowel on the plywood to make the tile stick. Higher latex content is essential for bonding to plywood. A quality unmodified thinset should be used and mixed with a latex additive.
What do you do with a gap between tub and cement board?
Technically, after the tile is installed over the backer board that gap between it and the tub ledge should be filled with an ASTM C920 sealant (caulking e.g. silicone). Although some say you should have weep holes along this gap so any water behind can weep out into the tub.
What Thinset should I use for 12×24 tile?
You often hear about using “thin set” to install tile, but in the case of installing 12×24 tile as flooring, you’ll want to use something called “medium bed” mortar. The medium bed holds its consistency better than the thin set, which will sag a bit in the middle of the tile.
Is Versabond modified or unmodified?
High bond strength, all-purpose, polymer-modified mortar adheres to most surfaces. For interior and exterior floors and walls.
