Table of Contents
The main difference between the inground and above-ground pumps is that above-ground pumps need manual priming, whereas inground pumps are “self-priming.” Since most inground pumps are above water level, this relates to the pump’s capacity to raise water vertically.
Can I use inground pool pump for above ground pool?
The main difference between inground and aboveground pool pumps is that inground pumps are “self-priming”, and aboveground pumps are not. Can you use an aboveground pool pump on an inground pool? Sure you can, as long as the pump is at or below the pool water level, and you have a very small pool.
Can I use any pump for my above ground pool?
For the most part, above ground pools are similar in size and shape. ( pools with less than 15,300 gallons) use a 1 HP pump. For round above ground pools over 24 ft. (pools with more than 15.300 gallons) use a 1.5 HP pump.
What type of pool pump is best?
BEST OVERALL: Hayward W3SP2610X15 Super Pump Pool Pump. BEST BANG FOR THE BUCK: Pool Pump by Blue Torrent, 1 HP Maxiforce In Ground. BEST SINGLE SPEED: Hayward W3SP2307X10 MaxFlo XL Pool Pump. BEST DUAL SPEED: XtremepowerUS 2HP In-Ground Pool Pump. BEST VARIABLE SPEED: Hayward W3SP2303VSP MaxFlo Variable-Speed Pool Pump.
Does it matter what pool pump you use?
For Pump Replacement Since pool filters have a maximum flow rate, your new pump cannot exceed the filter’s gallon per minute (gpm) rating. Higher horsepower pumps are mostly 230v only. If you only have 120v standard household current available at your equipment pad, you will not be able to power a larger pump.
How far should pool pump be from pool?
Stay close to the pool Shorter pipe runs = less work for the pump which extends the life of the pump and uses less electricity. Our projects typically average a distance of 20–40 feet from the pool to the equipment, but as stated earlier, much longer runs are sometimes required.
Do I need a pump for my above ground pool?
Above-Ground Pool Pumps To keep the water clean and circulated, you will need a pump and filter for your pool. The size and capacity of these units vary and will need to match the volume of your pool. When in doubt, consider going with a slightly bigger pump than you think you need.
What size filter do I need for a 10000 gallon pool?
Filter Size A helpful rule of thumb is to choose a filter with at least 1 square foot per 10,000 gallons pool capacity.
What size pump do I need for my pool?
Divide the pool volume by the number of hours that you would want the pump to be running, so that would be 65,947.5 divided by 6. This would give you 10,991 which means your pump should be able to turn around this much water in 6 hours.
How many HP pump for above ground pool?
Round Above Ground Pool: For pools up to 24 Ft Round, use a 1 HP pool pump. For pools over 24 Ft Round, we recommend using a 1.5 HP pool pump.
Which is better Pentair or Hayward?
The Hayward EcoStar has better energy efficiency and the Pentair IntelliFlo has a reputation for longevity with a proven track record. It’s a close battle between the two pumps and it really comes down to personal preference.
Is a bigger pool pump better?
A pool pump that is larger than needed has a more powerful motor and circulates water at a higher flow rate. This uses significantly more energy to pump the same amount of water and puts additional stress on your pipes and filter, meaning you’ll need to replace them sooner. A higher WEF indicates a more efficient pump.
Can I replace my 1 HP pool pump with a 1.5 HP?
So to answer the question, yes, you can replace your 1hp pool pump with a 1.5hp pool pump, but only if your situation calls for it. This will provide the flow that is needed to circulate your pool water properly and save you from high electricity bills at the same time.
What is the difference between a pool pump and a pool motor?
The pump’s shaft spins up to 3,450 revolutions per minute to turn the impeller to draw water from your pool and then push it through your filter and back to the pool. The motor is a cylindrical steel enclosure, usually black but sometimes gold or almond-colored, bolted to the back end of the wet end.
Does a pool pump use a lot of electricity?
Outside of the air conditioner, the pool pump is the largest electricity consumer in the average pool-containing home. According to the study, at the national average of 11.8 cents per KWh, a pool pump alone can add as much as $300 a year to an electric bill.
What is the most efficient pool pump?
TriStar® VS variable speed pool pumps are the most energy efficient on the market, according to EPA ENERGY STAR 3rd party testing data. Saving pool owners up to 90% on energy costs, they are specifically designed to replace most single speed pool pumps.
What time of day is best to run a pool pump?
It is best to run your pool’s pump during the day when the sun is out to reduce the risks of algae bloom and because there is generally more debris and contaminants that will enter your pool in the day.
How close to a house can a pool be?
There is a national standard that requires that all swimming pools must be at least 10 feet away from the house walls. As mentioned, this will protect electrical wiring from leaks, floods, and splashes.
How far does pool equipment have to be from house?
Every pool shall be equipped with an approved filter unit and drain. The location of pool equipment shall require an additional inspection and approval by the Noise Enforcement Inspector, when the pool equipment is located less than 10 feet from a property line of an adjoining property.
What is a good size above ground pool for a family of 4?
Round pools start at 12 feet in diameter, with 24-foot-diameter pools, which can fit four to five people, being the most popular choice, Carnes says. The most popular oval pools are 15 feet by 30 feet.
How do I prepare my yard for an above ground pool?
How to Prep Ground for an Above-Ground Pool Choose the best area of your yard to set up your pool. Mark the perimeter of the pool area. Remove all sod and other vegetation from the area. Determine the lowest point of the pool area. Create a wood level.
What do I need to know about installing an above ground pool?
As we said before, you can install an above ground pool on your own, but the assistance of a professional is highly recommended. Step 1: Clearing the Designated Area. Step 2: Leveling the Site. Step 3: Think About Drainage. Step 4: Frame the Foundation. Step 5: Install the Pool Base Support Material.
