QA

Quick Answer: What Is The Diamond On A Tape Measure At 19 3/16

The black diamonds which appear every 19 3/16” on metal tape measures are for spacing I-beam “timbers.” Several wood-product manufacturers offer I-beam “timbers” as a substitute for solid lumber floor joists. The diamond marks on tape rule blades are for spacing these engineered floor joists in new construction.

What is 19 diamond?

The black diamond marks every 19.2″ on our tape rule blades. This is for spacing of engineered joists common on job sites. The 19.2 inches allows for a break at 8 foot to accommodate full sheets of plywood.

What do the symbols on a tape measure mean?

The black diamonds on the tape measure represent that spacing. The first black diamond is at 19.2 inches” and after that black diamonds appear at 38.4, 57.6, 76.8, and 96 inches or 8 feet. That is one less stud for every 8 feet of wall, counting the beginning and end studs.

What is the mark on a tape measure at 19 3/16 for?

The black diamonds which appear every 19 3/16” on metal tape measures are for spacing I-beam “timbers.” Several wood-product manufacturers offer I-beam “timbers” as a substitute for solid lumber floor joists. The diamond marks on tape rule blades are for spacing these engineered floor joists in new construction.

What is 19 32 on a tape measure?

18/32” reduces to 9/16” and 20/32” reduces to 5/8”, therefore 19/32” is the 1/32 mark between 9/16” and 5/8”.

What is the red dot on a tape measure?

The red is for 16-inch-on-center spacing. The common framing spacing is for wall studs, floor joists and roof rafters. There will be red marks on the tape measure if you decide to space frame at 24 inch centers.

Why are measuring tapes yellow?

Tape measures often have black and red measurements on a yellow background as this is the optimal color combination for readability.

What does 19/32 convert to in inches?

The decimal equivalents of eights, sixteenths, thirty-seconds and sixty-fourths of an inch. Inches fractional decimal 19/32 0.59375 21/32 0.65625 23/32 0.71875.

Why is the inch divided into 16?

It was a natural progression when one wanted to measure portions of an inch. The most obvious place to start is to divide the inch in half, then each half in half again. You see where this is going: 1/2, 1/4, 1/8/ 1/16….

Where is 9/16 on a tape measure?

For instance, if your five ticks past the number 4 tick, then the measurement is 4 516“. Reading a tape measure is just like reading a ruler.Inch Fraction, Decimal and Millimeter Equivalents. Fraction Decimal Millimeters 3 ⁄ 8 ” 0.375 9.525 7 ⁄ 16 ” 0.4375 11.1125 1 ⁄ 2 ” 0.5 12.7 9 ⁄ 16 ” 0.5625 14.2875.

What is M on a measuring tape?

On many tapes (but by no means all) you will find a small red rectangle with the letter M printed inside followed by a number. The number simply denotes the year that the blade was stamped as conforming to the Measuring Instruments Directive. On the whole this will also be the year in which that tape was manufactured.

What is the 8 foot rule on a tape measure?

For every 8-foot section of your wall, there should be six studs placed 16 inches apart. That’s why there are red numbers highlighted every 16 inches. If you use the tape measure, you can note exactly where the studs are by using the red numbers and marking the studs using a pencil.

Why is 16 red on a tape measure?

The red indicates 16-inch-on-center spacing. This is a common framing spacing for wall studs, floor joists and common roof rafters. If you decide to space framing at 24-inch centers, the red marks will be at every other foot marking on the tape measure.

What are the 16th marks on a tape measure?

Tape measures usually have a red mark every 16 inches. This makes it convenient to mark off wall studs or joists, which typically are 16 inches apart. Unless you are dealing with wall studs or joists, you can ignore this marker.

What are the black numbers on a tape measure?

Tape measures often use small, black diamond or triangle shapes called black truss marks. They indicate truss layouts of every 19 3/16 inches. This spacing is often used by some engineered joist manufacturers. There are 5 of these marks for every 8 feet.

Can you measure your shoe size with a tape measure?

1) FIND YOUR SHOE SIZE: Using a tape measure or ruler, measure the distance from the back of your heel to the end of your longest toe (in mm). Most people have feet of different sizes and the length of your longest foot should determine your shoe size.

How fast does a tape measure retract?

In a vacuum, objects accelerate to 9.8 meters per second per second thanks to gravity. But the tape measure was not falling in a vacuum.Parts and materials: Falling object Accepted disabling claims Wallboard, drywall, sheetrock 1.

Can a tape measure cut you?

A tape measure can’t cut off a finger like a table saw or puncture your body like a nail gun, but it comes with some safety considerations you need to observe. Tape measures can cause injuries when used improperly, and they can damage breakable items in your home.

What is the most accurate tape measure?

Class 1 tapes are the most accurate tape measures on the market. Ideal for precision trades and sensitive industries, they also delivery great value for money.

How many 64th are in a 16th?

Fractional / Decimal Conversion 32nd 64th Decimal 1/32 1/32 0.031 3/64 0.047 1/16 1/16 0.063.

What is the decimal for 19 32?

As you can see, in one quick calculation, we’ve converted the fraction 1932 into it’s decimal expression, 0.59375.