Table of Contents
Frequently asked questions about Kitchen Cabinet Sizes What is the standard size for upper kitchen Cabinets? The average wall or upper kitchen cabinets are 30”-42” in Height, 12”-24” in Depth, and 9”-36” in Width.
Do upper cabinets come in different depths?
An exciting new way to expand your kitchen’s storage capability! There is no set rule, upper cabinets aren’t made in any one specific height or width, even the depth can vary. It is true that generally upper cabinets tend to be shallower than lower ones.
Are all upper cabinets 12 inches deep?
Standard wall cabinets (sometimes referred to as “upper cabinets”) are 12 inches deep; standard base (below-counter) cabinets are 24 inches deep. But these days, says Scott, more companies are making wall cabinets 15 inches deep, which gives more storage space.
How deep should top cabinets be?
The standard depth for your upper cabinets, or wall cabinets, is 12 inches deep. This is exactly half the size of standard base cabinets. This depth allows you to freely work on the countertops without the wall cabinets being right in your face.
Why are kitchen cabinets 24 inches deep?
More Usable Storage One 24-inch drawer offers 15% more storage than two 12-inch drawers. And full-extension deep drawers offer 55% more storage than a shallow drawer of the same width.
What is the average depth of a cabinet?
24 inches Height, without countertop 34 1/2 inches Height, with countertop 35 to 36 inches Depth (front to wall), without countertop 24 inches Depth, with countertop 25 to 26 inches Standard widths 12, 18, 24, 30, 33, 36, 48 inches.
What is standard countertop depth?
While the standard kitchen countertop depth is 25 ½ inches, most kitchen island countertops can go up to 27 or 28 inches deep and over 30 inches deep if it comes with a breakfast bar. The island countertop depth depends on the availability of space.
How much space should be between countertop and upper cabinets?
The standard distance between the top of a kitchen counter and the bottom of the wall cabinets above it is 18 inches. For the average person, this distance is the ideal balance between plenty of space to work on the countertop and the ability to reach all of the shelves in the cabinet.
Can upper and lower cabinets be the same depth?
Lower cabinets along a wall are typically about 24 inches deep, with a 25-inch deep counter on top of them. But with most cabinet lines it’s possible to use “counter-depth” or “full-depth” upper cabinets, which are the same depth as typical lowers.
How deep are shallow kitchen cabinets?
The shallowest base cabinets are 12 inches deep (Usually, a wall cabinet is used to achieve this depth). The width can range from nine inches wide to 36 inches wide.
Can upper cabinets be 24 deep?
12″ is the standard for a reason, though in some instances you can get away with 14″ or 16″ uppers. The ONLY way that 24″ uppers would work is if it was a continuous cabinet without a counter, like a pantry cabinet.
Can kitchen cabinets be 30 inches deep?
Kitchen Base Cabinets Base cabinets are often 24 inches deep. In some cases, base cabinets may be up to 30 inches deep, but this can make it a bit difficult to reach the back of the countertop or the wall outlet above the counter.
How deep are kitchen cabinets lower?
Depth: The depth of base cabinets without the countertop typically measures 24 inches. Adding the countertop will create an overhang between one to two inches.
Does cabinet depth include doors?
General Sizing Specifications These depths are from the back of the cabinet to the front of the face frame and do not include the thickness of the door and drawer front.
How much should a countertop overhang?
How far should a countertop overhang on the side? Generally, the standard overhang of a countertop is 1 to 1 ½ inches from the cabinet, while the exposed ends of a countertop will usually have a ½ inch overhang, and the ends that meet a wall don’t have any overhang at all to keep the fit flush to the wall.
What is standard depth vs counter depth?
standard depth refrigerators is depth dimension. Counter depth fridges fit nearly flush with your cabinetry, but measure smaller in depth than standard size fridges. For certain counter depth models, a larger width and height make up for some lost storage.
What is the standard height and depth of a kitchen counter?
(Standard kitchen counter height and depth is generally 36″ high and 25″ deep.).
What is standard kitchen size?
Standard kitchen size in India:– in india, standard size of kitchen should be 8 ft wide by 10 ft long represented as 8 ft × 10 ft (2.4 m × 3m), this is standard size of kitchen that allowing 2 people to working inside it, taking minimum 2 feet width for platform and clear distance of 6 feet for freely movement and.
How thick should my countertop be?
The industry standard thickness for kitchen, bathroom, and other countertop surfaces in natural stone is 1.25 inches. This thickness provides the strength and stability required to create an unbroken surface without the need for stabilizing it with a plywood backing.
How thick is a quartz countertop?
Given the inadequacy of thin slabs, installation professionals usually recommend a thickness of 3 cm for quartz countertops. A 3cm thick slab is at the top of the list when it comes to strength and durability. Thicker quartz countertop designs look more luxurious and typically offer a more classic appearance.
