Table of Contents
The standard depth of a vanity, from front to back, is typically between 20 to 21 inches. However, there are narrow depth options available which are usually 18 inches. While there isn’t necessarily a standard for vanity height, you will typically find them in the range of 32 to 36 inches tall.
What is the smallest depth for a bathroom vanity?
While most bathroom vanities measure around 17 inches to 24 inches deep, the standard bathroom vanity depth is 21 inches. For smaller bathroom spaces, narrow depth bathroom vanities are available that measure less than 18 inches deep.
What is the standard height and depth of a bathroom vanity?
For a single vanity, the most popular widths are 24″, 30″, 36″, 48″, and for double vanities the most popular widths are 60″ and 72″, but start at 48″. The standard depth of a vanity is typically around 20″, but narrower options are available. The standard vanity height is 32″, but ranges from 30″ – 36″.
How deep is a 36 inch vanity?
Bathroom Vanity Sizing Vanity Size Width Depth 36” 36 inches 22 inches 42” 42 inches 22 inches 48” 48 inches 22 inches 60” Single 60 inches 23 inches.
What is the best depth for a bathroom sink?
Most round bathroom sink bowls are 16 to 20 inches in diameter, while most rectangular sinks are 19 to 24 inches wide and 16 to 23 inches front to back. The typical basin depth is 5 to 8 inches.
How shallow can a vanity be?
The standard vanity depth is 21 inches. But you can gain floor space in a small bath by trimming at least part of the vanity to 18, 15, or even 12 inches deep.
What is the most narrow vanity?
The Beverly Single Bath vanity is one of the narrowest vanities at 19″D yet still holding plenty of storage space for all your personal accessories.
How is vanity depth measured?
Take a measurement at the widest part of the variety in contact with the the floor, which is your base width. Then, measure across the countertop, which is your top width. Next, to get the depth dimensions of your vanity, take base and top measurements.
How much overhang should a bathroom countertop have?
The standard overhang for a bathroom countertop is about 1 to 1 1/2 inches from the cabinet. A bathroom countertop that is surrounded by walls is typically flush with the boundaries and has no overhang except the inch or more in the front.
How deep are bathroom wall cabinets?
The standard measurements for bathroom cabinet depths are as follows: Most lower bathroom cabinets and vanities range between 21-22 inches. Sometimes you’ll find 18-inch depths. Medicine cabinets are typically about 4 inches deep, whether recessed or mounted on the wall.
What is the standard vanity height?
It’s so hard to make everyone happy. Traditional vanity heights in older homes range from 30 to 32 inches up from the floor. The modern trend is toward higher vanities, up to around 36 inches. For reference, that’s the standard counter height for kitchens.
What size is a 28 in vanity jeans?
In other words, if a size 8 in many brands fits a woman with a 28-inch waist, a size 4 or 6 that fits that same woman is often considered “vanity sized.” The woman has the same body, with the same measurements, but in some brands she wears a “smaller” size.
What size mirror do I need for 36 inch vanity?
What Size Mirror Should I Use Over a 36-Inch Vanity? If your vanity is 36 inches, then your mirror should be at most 32 inches wide, leaving 2 inches of space on either side of your vanity.
What is the smallest size bathroom sink?
Tiny bathroom sinks, typically under 15” in length, are perfect for small bathroom designs where space is very limited. Due to their size, it is very common that tiny bathroom sinks are wall mounted or attached to a narrow bathroom vanity.
What size sinks for 72 inch vanity?
General Bathroom Sink Sizes for Vanity Cabinets Cabinet Width Cabinet Depth (Standard) Max Sink Size (With NO counter space) 36″ 21″ 33″ 48″ 21″ 34″ 60″ 21″ 34” or 19” x 2 for double sinks 72″ 21″ 34” or 19” x 2 for double sinks.
How deep are vanity drawers?
According to the National Kitchen & Bath Association, “The standard depth is 21” to the front of the box plus the thickness of doors and drawers. Some vanity cabinets used in small baths will be as little as 18” or 16”.” Always confirm that the vanity you choose is deep or shallow enough to work for your bathroom.
Why are bathroom counters so low?
The only reason bathroom counters were lowered was to make the sink accessible for small children. While it’s not entirely impossible for them to use the sink, it could make it more difficult for them to wash their hands. For kids bathrooms, you can install standard height vanities.
How much space should be between shower and vanity?
NKBA designers recommend a 30″ clearance between the front edge of a fixture, such as a vanity or toilet, and any other fixture or wall. The building code allows for a minimum of 21″. The bathroom lavatory, or sink, should be placed far enough from a wall or shower wall that it’s comfortable to use and easy to clean.
What is the smallest sink available?
At 18″ wide by 10″ deep, this tiny wall-mount is one of the smallest sinks out there. Duravit Vero Wall-Mounted Handrinse Basin, $360.75 from eFaucets. This sink has an attractive, modern look, and the attached towel bar is a nice touch.
