Table of Contents
Concrete slabs typically cost about $6 per square foot, or between $4 and $8 per square foot including labor. That’s about $5,400, or between $3,600 and $7,200 for a typical 30- by 30-foot slab that’s 6 inches deep. Materials alone cost about $4 per cubic foot.
How much does it cost to pour a 20×20 slab?
You can expect to pay between $1,600 and $3,200 for a 20×20 slab. The estimates are based on the average cost of $4 to $8 per square foot for a concrete slab. Yet, the costs may vary. Here is a closer look at the average cost of pouring a concrete slab for a barndominium.
How much does it cost to pour a 40×60 concrete slab?
Concrete Slab Prices By Size Slab Size Square Feet Average Cost Installed 20×30 600 $3,702 30×30 900 $5,553 30×40 1200 $7,404 40×60 2400 $14,808.
How much would it cost to pour a 30×40 concrete slab?
How much does a 30×40 concrete slab cost? The average cost is $4 to $8 per square foot. The median price is about $6 per square foot. Based on these averages, you may pay $4,800 to $9,600 with a median estimate of $7,200.
How thick should a concrete slab be?
Standard concrete floor slab thickness in residential construction is 4 inches. Five to six inches is recommended if the concrete will receive occasional heavy loads, such as motor homes or garbage trucks. To prepare the base, cut the ground level to the proper depth to allow for the slab thickness.
How many yards of concrete do I need for a 24×24 slab?
For example, for a concrete slab that is 24′ X 24′ X 4”, simply enter 4 in the Thickness/Depth field, 24 in the Width field, and 24 in the Length field. Click “Calculate”. Your answer should be 7.11 yards. Note: The Concrete Volume Calculator can also be used to determine yardage for aggregate products.
How much would a 50 concrete slab cost?
A DIY 50×100 concrete slab may cost a minimum of $14,150 for a four-inch slab with no extra features. With a vapor barrier, thicker edges, and wire mesh, you may pay up to $23,650. Hiring a contractor to pour and finish a 50×100 slab may cost a minimum of $20,000 and a maximum of $40,000.
How many bags of concrete do I need for a 10×10 slab?
The thickness of your 10′ x 10′ slab will determine just how many bags you need. The average thickness of a 10′ x 10′ concrete slab for a shed is 4 inches thick. At 4″ thick, your 10 x 10 slab will take 56 bags of concrete that weigh 80 lbs.
How much concrete do I need for a 30×30 slab?
18 yards of 3000 psi concrete mix @ 135.00 per yard. Wire mesh reinforcement. A double row of #4 rebar around the edges. Labor to form the slab.
How many sq ft does a yard of concrete cover?
How much concrete is in a yard? Concrete volume is measured in cubic yards. When poured on a perfectly level surface, one cubic yard will cover 27 square feet at one foot thick.
What does a 30×40 shop cost?
The average 30×40 building kit costs $15,000 but can range anywhere from $13,200 to $18,200 depending on location, building specifications, and optional upgrades.
How much does it cost to pour 25 yards of concrete?
Cost Estimator by Amount of Concrete CUBIC YARDS AVERAGE COST TYPICAL COST RANGE 15 $1,760 $1,560 to $2,160 20 $1,920 $2,080 to $2,880 25 $2,080 $2,600 to $3,600 30 $2,240 $3,120 to $4,320.
How many yards of concrete do I need for a 10×10 slab?
The amount you will need for a 10 x 10 slab is 1.3 cubic yards, we always add an extra 10% to allow for any slab depth variations or spills that may occur.
HOW MUCH CAN 4 inches of concrete hold?
Typically we like to limit the weight to about 40 lb/sqft on an unknown 4″ slab. In most cases you can go to 80 lb/sqft in isolated spots, but unless you know roughly what the soil bearing and reinforcing is for that slab you might be looking at cracking.
Is 3 inch concrete slab enough?
Here, pouring a concrete slab 4 inches in thickness is fine. While you may choose to reinforce it with rebar, wire mesh should be sufficient. Outdoor kitchen foundation. A 3- to 4-inch slab will work for the floor of a storage or tool shed, workshop, garden shed, or playhouse.
How thick do I need my concrete?
Place concrete at a minimum thickness of 4 inches. Increasing the thickness from 4 inches to 5 inches will add approximately 20% to your concrete cost, but will also boost your driveway’s load-carrying capacity nearly 50% , according to the Tennessee Concrete Association.
How many 80lb bags of concrete make a yard?
One 80lbs bag of Quikrete Concrete Mix will yield approximately . 60 cu ft. So it will take 45 bag to equal one cubic yard of concrete.
How thick should a concrete patio be?
Four inches is the minimum thickness for a concrete patio. You’ll want to make it six to eight inches thick if the patio will support a structure such as a gazebo or hot tub.
How much is a 10×20 concrete patio?
How Much Does a 10×20 Concrete Patio Cost? A concrete patio costs between $4 and $12 per square foot, including materials and labor. Based on those estimates, a 10-foot by 20-foot concrete patio would cost between $800 and $2,400.
How much concrete do I need for a 40×60 shop?
How much does a 40×60 concrete slab cost? It would be about $8,500 to $12,000 for a 40×60 foot concrete slab, 6 inches thick. That’s based on national averages of around $5 per square foot for a fully engineered, finished concrete slab, including labor and materials.
Why is concrete so expensive?
As more areas become industrialized—and as there grows a greater need for durable building materials to withstand severe weather and long-term wear—the demand for concrete has significantly increased. This alone has affected the price of concrete over the years.
