Table of Contents
Aluminum sulfate (alum) is the most common coagulant used for water purification. Other chemicals, such as ferric sulfate or sodium aluminate, may also be used. Coagulation is usually accomplished in two stages: rapid mixing and slow mixing.
Aluminium sulfate – Wikipedia
(alum) is the most common coagulant used for water purification. Other chemicals, such as ferric sulfate or sodium aluminate, may also be used. Coagulation is usually accomplished in two stages: rapid mixing and slow mixing.
Which chemicals are used for coagulation?
The main chemicals used for coagulation are aluminium sulphate (alum), polyaluminium chloride (also known as PAC or liquid alum), alum potash, and iron salts (ferric sulphate or ferric chloride).
What is a coagulant in water treatment?
Water treatment coagulants are comprised of positively charged molecules that, when added to the water and mixed, accomplish this charge neutralization. Inorganic, organic, or a combination of both coagulant types are typically used to treat water for suspended solids removal.
What are the side effects of alum?
If experienced, these tend to have a Severe expression i fluid accumulation around the eye. throat swelling. a feeling of throat tightness. a skin ulcer. hives. a shallow ulcer on the skin. fainting. puffy face from water retention.
What are the common coagulants?
The commonly used metal coagulants fall into two general categories: those based on aluminum and those based on iron. The aluminum coagulants include aluminum sulfate, aluminum chloride and sodium aluminate. The iron coagulants include ferric sulfate, ferrous sulfate, ferric chloride and ferric chloride sulfate.
What is the most used coagulant?
Chemical Coagulants Used In Water Treatment Aluminum Sulfate (Alum) – One of the most commonly used water treatment chemicals in the world. Aluminum Chloride – A second choice to Alum as it is more expensive, hazardous and corrosive. Polyaluminum Chloride (PAC) & Aluminum Chlorohydrate (ACH).
Does alum increase pH?
Ionic species present in alum solutions are highly dependent on the degree of reaction with hydroxyl ions. It is tempting to say that “the composition is pH-dependent.” However, in the vicinity of pH=4.3 the composition of alum solutions changes a great deal with very little change in pH.
What is coagulant used for?
What are coagulants used for? In water treatment, coagulants are used to remove a wide variety of hazardous materials from water, ranging from organic matter and pathogens, to inorganics and toxic materials, like arsenic, chemical phosphorous and fluoride.
Is gypsum a flocculant?
Gypsum can coagulate or bridge clay particles, which accelerates settling. Flocculants should be used to prevent damage to sensitive water resources such as ponds, lakes and trout streams or whenever turbidity control is required. The best thing to do is a jar or bucket test using slightly varying rates of gypsum.
What is a coagulant and why is it used?
Coagulants are used to increase the size of aquatic substances, making them large enough to settle or to be removed by sand, dual layer filtration, or the membrane.
What is coagulant explain with example?
Coagulants are a substance which cause particles in a liquid to curdle and clot together. Coagulation treatment chemicals are used in effluent water treatment processes for solids removal, water clarification, lime softening, sludge thickening, and solids dewatering.
Is FeCl3 a coagulant?
Ferric chloride (FeCl3) is the most common iron salt used to achieve coagulation. Its reactions in the coagulation process are similar to those of alum, but its relative solubility and pH range differ significantly from those of alum. Both alum and ferric chloride can be used to generate inorganic polymeric coagulants.
What are natural coagulants?
They are mainly composed of polymers of natural origin extracted from plants, algae or animals. Among these are polysaccharides and water soluble substances that act as coagulation and / or flocculation agents.
Is na2so4 a coagulant?
Sodium sulfate is a well-known coagulant for PVA, and it is used in the coagulation bath of PVA before wet spinning of vinylon fibers.
Is Lime a coagulant?
Lime (Ca(OH)2 or CaO): Lime, or calcium hydroxide, is predominantly used to adjust pH, but as a softener, it can also be used as a coagulant aid. The lime bonds with the other particles and increases the size/weight of the flocs which then increases the speed with which they settle out of the water.
Which is the most commonly used coagulant in water treatment?
1. Alum (aluminum sulfate), Al2(SO4)3. Still, the most common coagulant in the United States, it is often used in conjunction with cationic polymers.
What are the similarities and differences between flocculation and coagulation?
Coagulation is a chemical process and flocculation is a physical process, In coagulation, the process involves the utilization of a coagulant that has the ability to destabilize the charged particles which are not settleable whilst flocculation involves a similar destabilization process that is achieved through Dec 10, 2017
How the coagulant works in jar test?
The jar test involves exposing same volume samples of the water to be treated to different doses of the coagulant and then simultaneously mixing the samples at a constant rapid mixing time. The microfloc formed after coagulation further undergoes flocculation and is allowed to settle.
Which gas is released when alum is added to water?
Explanation: Carbon dioxide gas is released when alum is added to water, which is corrosive to metals.
What is the difference between flocculant and coagulant?
Flocculants differ from coagulants in that they are often polymers, whereas coagulants are typically salts. Generally speaking, anionic flocculants are used to catch mineral particles while cationic flocculants can capture organic particles.
How does a coagulant work?
Coagulants work by creating a chemical reaction, eliminating negative charges that cause particles to repel each other. The action of these bubbles forces clots or flocs of particles to the water surface where they can be skimmed off. Dissolved air flotation is an alternative to sedimentation.
Is alum a coagulant?
Alum is one of the most widely used coagulants in the water treatment industry (Benschoten and Edzwald 1990). For water and wastewater treatment, the coagulants used more frequently are the inorganic salts of aluminum.
Why alum is used as coagulant?
When alum is added to water, it reacts with the water and results in positively charged ions. Coagulation removes colloids and suspended solids from the water. These particles have a negative charge, so the positively charged coagulant chemicals neutralize them during coagulation.
What makes a good coagulant?
The best coagulant is therefore a pre-hydrolysed species with a high basicity. PACl has been found to be very suitable for lime softening applications. The advantage of a low basicity coagulant is even more pronounced in full softening applications, and the non-sulphated PACl is the coagulant of choice.
