Table of Contents
Aluminum sulfate (alum) is the most common coagulant used for water purification. Other chemicals, such as ferric sulfate or sodium aluminate, may also be used. Coagulation is usually accomplished in two stages: rapid mixing and slow mixing.
What chemicals are used in coagulation?
Traditional chemical coagulation uses aluminum and iron coagulants. The most common aluminum coagulants are aluminum sulfate, aluminum chloride, and sodium aluminate. Iron coagulants include ferric sulfate, ferrous sulfate, ferric chloride, and ferric chloride sulfate [4].
What is the most commonly used coagulant in water treatment?
Aluminum and iron salts are the most commonly used inorganic coagulants in the wastewater treatment settings. These include based aluminum metals (aluminum chloride, aluminum sulfate, sodium aluminate) and iron based metals (ferrous sulfate, ferric sulfate, ferric chloride) [13, 17, 18].
Is alum a coagulant?
Alum is one of the most widely used coagulants in the water treatment industry (Benschoten and Edzwald 1990). For water and wastewater treatment, the coagulants used more frequently are the inorganic salts of aluminum.
What is coagulant explain with example?
To induce coagulation, a coagulant (typically a metallic salt) with the opposite charge is added to the water to overcome the repulsive charge and “destabilize” the suspension. For example, the colloidal particles are negatively charged and alum is added as a coagulant to create positively charged ions.
Why alum is used as coagulant?
When alum is added to water, it reacts with the water and results in positively charged ions. Coagulation removes colloids and suspended solids from the water. These particles have a negative charge, so the positively charged coagulant chemicals neutralize them during coagulation.
Why does pH affect coagulation?
Since pH values affect the surface charges and forms of the coagulants and impurities to be removed, controlling the level of pH would significantly improve the coagulation process. Therefore, not only coagulant dosage, but also pH value should be optimized to maximize the removal of impurities present in raw water.
Why is coagulant added to water?
Coagulant aid Chemicals (typically synthentic polymers) added to water to enhance the coagulation process. if an excess of alum is added so that the dosed water pH is less than 5.0, then the metal ions (Al3+) will directly ˜eutralize the negatively charged organic compounds and colloids in the raw water. 1.
What is the purpose of coagulation?
Coagulation is a process used to neutralise charges and form a gelatinous mass to trap (or bridge) particles thus forming a mass large enough to settle or be trapped in the filter.
What are the 4 steps of water treatment?
These include: (1) Collection ; (2) Screening and Straining ; (3) Chemical Addition ; (4) Coagulation and Flocculation ; (5) Sedimentation and Clarification ; (6) Filtration ; (7) Disinfection ; (8) Storage ; (9) and finally Distribution. Let’s examine these steps in more detail.
What are the side effects of alum?
Side effects of Alum The excessive amount of alum intake may cause breathing difficulty, facial puffiness, pricking sensation & small ulcers on the skin, chest/throat tightness, and burns rarely seen in some cases.
What is the best coagulant?
Generally, alum is the first coagulant of choice because of its lower cost and its widespread availability. For coloured, low turbidity, low pH/alkalinity surface waters pre-treatment with lime, soda ash or caustic soda will normally be required to ensure that the optimum coagulation (dosed-water) pH is achieved.
What are the factors affecting coagulation?
Many factors effect of colloidal matter such as, nature of coagulant, retention time, concentration of coagulant and the physical properties such as temperature, pH and others.
What is most common used coagulant?
1. Alum (aluminum sulfate), Al2(SO4)3. Still, the most common coagulant in the United States, it is often used in conjunction with cationic polymers.
What makes a good coagulant?
The best coagulant is therefore a pre-hydrolysed species with a high basicity. PACl has been found to be very suitable for lime softening applications. The advantage of a low basicity coagulant is even more pronounced in full softening applications, and the non-sulphated PACl is the coagulant of choice.
What are the types of coagulants?
The aluminum coagulants include aluminum sulfate, aluminum chloride and sodium aluminate. The iron coagulants include ferric sulfate, ferrous sulfate, ferric chloride and ferric chloride sulfate. Other chemicals used as coagulants include hydrated lime and magnesium carbonate.
Which coagulant is used for sewage treatment?
Alum is used in water treatment whereas Ferric Chloride is used in sewage treatment.
What is difference between alum and iron floc?
Coagulation process is important in water treatment. It is a common understanding that alum is more efficient and cheaper as compared to ferric chloride. I have used these two coagulants for the treatment of Flour Mill Wastewater. Ferric Chloride is way more superior than alum.
How does a coagulant work?
Coagulants work by creating a chemical reaction, eliminating negative charges that cause particles to repel each other. The action of these bubbles forces clots or flocs of particles to the water surface where they can be skimmed off. Dissolved air flotation is an alternative to sedimentation.
What is coagulation process in water treatment?
Coagulation is the chemical water treatment process used to remove solids from water, by manipulating electrostatic charges of particles suspended in water. This process introduces small, highly charged molecules into water to destabilize the charges on particles, colloids, or oily materials in suspension.
What is coagulation process?
Coagulation is a process of combining particles, colloids, and dissolved organic material into larger aggregates (Amirtharajah and O’Melia, 1990). These aggregates are then removed from the water usually by clarification and filtration processes in most conventional WTWs.
Is FeCl3 a coagulant?
Ferric chloride (FeCl3) is the most common iron salt used to achieve coagulation. Its reactions in the coagulation process are similar to those of alum, but its relative solubility and pH range differ significantly from those of alum. Both alum and ferric chloride can be used to generate inorganic polymeric coagulants.
What is the difference between coagulant and flocculant?
Flocculation is synonymous with agglomeration and coagulation / coalescence. Basically, coagulation is a process of addition of coagulant to destabilize a stabilized charged particle. Meanwhile, flocculation is a mixing technique that promotes agglomeration and assists in the settling of particles.
What does coagulation mean?
Coagulation, in physiology, the process by which a blood clot is formed. The formation of a clot is often referred to as secondary hemostasis, because it forms the second stage in the process of arresting the loss of blood from a ruptured vessel.
