Table of Contents
The three common choices when it comes to wood decks are redwood, cedar and pressure-treated wood that can be made of various types of wood species. Redwood and cedar are both naturally insect and rot resistant and have a natural look, but each has its own inherent issues.
What type of wood is best for a deck?
Overall, our experts at Patio Productions recommend Cedar or Redwood as the best wood choice for outdoor decks. If you’re looking for a cheaper option, pressure treated wood is your next best option.
What is the longest lasting wood for a deck?
Aluminum decking is the most expensive out of the deck material and will last the longest with a lifespan of 30+ years. Steel decking can have a lifespan of 60+ years when correctly installed by a professional builder.
Should I use deck boards or 2×6?
2×6 is thicker and is stronger, but is also more expensive. Spacing between deck boards provide a few critical functions. The primary function is to drain water from the deck. Gaps that are narrow (1/8”), can catch debris, specifically on top of the joists, and can be difficult to clean out.
Should you use pressure treated wood for a deck?
It’s better to use treated lumber and know your deck will be secure in a few years than try to use untreated wood for the supports and watch them rot away rapidly. Pressure treated wood doesn’t release any gases or particulates that could harm you and your family.
Which lasts longer cedar or pressure treated wood?
Cedar is stronger and more durable than pressure-treated lumber. Pressure-treated lumber can warp and weather within a few years if left untreated, while cedar is more capable of naturally keeping its shape.
Which is Better pressure treated wood or cedar?
When it comes to comparing treated wood vs. cedar, pressure-treated wood is the sturdier and more weather-proof of the two. It’s highly resistant to insect attack and rot, and special versions rated for “ground contact” can be buried in soil and will continue to shrug off decay for decades.
Which is better redwood or pressure treated wood?
Durable- It’s naturally resistant to bugs and rot – unlike pressure treated yellow pine that needs some funky stuff (copper chromium arsenate) to keep the bugs at bay. Easy to Maintain- Whether it’s finished with a sealant or left as is, redwood is fairly easy to clean.
How long will pressure treated wood last?
How Long Does Pressure-Treated Wood Last? It depends on the climate, the type of wood, its uses, and how well it’s maintained. While pressure treated poles can stay up to 40 years without any signs of rot or decay, decks and flooring might only last around 10 years.
How many years should a wood deck last?
A deck made of untreated wood can last anywhere from 10 to 30 years. Decks made of treated wood and composite materials can last as long as 50 years. Many composite decks come with a 20-year warranty – and often a lifetime guarantee.
Can you use 2×6 for decking?
2×6 joists should only be used on ground-level decks that do not require, and will not provide for, any guards. Most decking is not strong enough to support longer spans than 16″. Some builders reduce joist spacing to 12″ on center to strengthen the deck frame or to increase maximum allowable joist spans.
How far can a 2×6 span on a deck?
Decking boards span from joist to joist. If you use 5/4 decking, joists must be no farther apart than 16 inches. Decking made of 2x4s or 2x6s can span up to 24 inches. If you will run decking at an angle, you might need to put the joists closer together.
How far can a 2×6 decking span without support?
2-grade 2×6 joists can span up to 10 feet 9 inches from beam to beam when spaced the standard 16 inches apart with a maximum live load of 30 inches per square foot.
Does decking have to be treated?
We recommend you wait around six months for it to be fully eroded. Once you’ve waited for the coating to erode, treat your new decking as normal with oil or stain. Another important way to protect your decking is to use an end grain protector to protect the exposed ends.
What should I use for deck boards?
Redwood, cedar, and cypress, as well as the exotic species, are good choices, but since most decking boards from domestic woods are sapwood and not rot-resistant, you should treat them.
What are the disadvantages of cedar wood?
Disadvantages of Cedar Wood Decking: Cost- Just like composite, cedar can be much more expensive than other wood. Fades to a weathered grey over the years, which can be a drawback to some people.
What is the most rot resistant wood?
Cedar, redwood, cypress and other naturally rot-resistant woods are often hailed as the premier choice when building outside structures like decks, arbors or saunas.Naturally Rot-Resistant Species: Redwood. American mahogany. Cypress. Western red cedar. Pacific yew. Teak. Black walnut. White oak.
How long will cedar posts last in the ground?
Cedar has a reputation for durability, but unless a few guidelines are followed, cedar posts can fail in as few as five years. Three factors contribute to this early failure: poor drainage, low-quality wood and poor protection against insect damage.
Is cedar more expensive than treated wood?
Price – Cedar can cost about twice as much as pressure-treated wood. Softness – Cedar is a soft wood. Over time, high traffic areas such as the stairs will wear down.
What is the best wood for fence posts?
Pine is the most common and, when pressure treated, can last for up to 30 years. Other long-lasting types are Redwood and Sweetgum. Some tree species don’t need to be treated and can last up to 25 years.
What is the best wood for a fence?
The most popular woods used for fencing are pine and cedar, though cypress and redwood are also good options. Pine wood is common because of its relatively inexpensive cost and longevity. It’s also soft and therefore easy to work with, and it resists shrinkage.
