Table of Contents
Heavily soiled epoxy floors. The best way to clean up a dirty epoxy floor is as follows: Sweep and vacuum the entire area carefully. Remove all items in the way to get to the floor. Once you have removed all the surface dirt, grime, and grit, use a hard foam mop and warm/hot water to get rid of all the built-up dirt.
How can I make my epoxy floor shine again?
You can retain the shine with regular cleaning instead of reapplying a brand new coat of epoxy. However, it may lose the shine from the foot or vehicle traffic. Therefore, you will have to clean it once or twice in a year to make it shine again. You can clean by hosing off with hot water and then use a squeegee to dry.
Is Pine Sol safe for epoxy floors?
Even though epoxy is a durable material, small bits of dirt can become embedded in the epoxy if not removed properly and frequently. Mix an all-purpose cleaning product such as Pine-Sol or Mr. Clean and mix it according to manufacturer’s directions in a bucket with warm (never hot) water.
Can you use dawn on epoxy floors?
Another way to clean up your epoxy flooring is by mopping it with a little bit of dish soap and water. Simply add about a 1/3 cup of dish soap to a bucket of water then according to Do It Yourself: Soak your mop in the bucket, and mop your floor. Make sure to cover the entire floor.
Why isn’t my epoxy floor shiny?
Even with regular maintenance, epoxy floors can lose their shine over time. If your epoxy flooring no longer possesses its glossy appearance, you may need to apply wax. A few coatings of wax can bring back the shine in epoxy while adding a protective layer to flooring.
Are all epoxy floors shiny?
Epoxy flooring looks glossy and shiny when new, but may fog over time. Clean the entire floor at least once a year to help maintain its shine. You can do this by hosing the whole floor with hot water and use a squeegee to dry.
What should you not put on a epoxy floor?
Avoid using steel wool or harsh chemicals like comet, they are too abrasive. Use soft-scrub and a moderately abrasive scrubbing pad or brush. Don’t ever use any cleaning compounds with citrus or acid in them. Citrus cleaners and vinegar will break down the epoxy catalyst and must be avoided.
How long do epoxy floors last?
Typically, epoxy flooring lasts 2 to 3 years in heavy traffic. Commercial properties—like garages, restaurants, or factory spaces—with lots of daily foot traffic can expect this experience. However, with proper care and maintenance, your epoxy flooring may last much longer.
Can you use rejuvenate on epoxy floors?
Conclusion. Bear in mind that while your epoxy floors are extremely durable, they are not impervious to damage and accidents. If you need professional assistance with your epoxy floor, contact Rejuvenate Flooring at (877) 826-2525 info@rejuvenateflooring.com.
What are the disadvantages of epoxy flooring?
Disadvantages epoxy floor Epoxy floors are hard and therefore there is contact noise during walking. Without underfloor heating an epoxy floor feels somewhat cold, similar to tiled floors. If there are unevennesses or cracks in the substrate, ripples can become visible in the floor.
Do epoxy floors scratch easily?
Epoxy floors are some of the hardest and most durable industrial floors on the market. That being said, they can still scratch, cut, or gouge if enough force is applied. Typical epoxy floors have strength of more than 10,000 psi.
Why is my epoxy floor turning yellow?
Epoxy resin turns a yellow hue due to exposure to a myriad of elements. High temperatures, excessive amounts of water, and UV light can all cause the epoxy to change from clear to yellow in tint. Epoxy hardeners can also experience a yellowing discoloration that compounds the epoxy’s off-color issues.
Should epoxy floors be rough?
Feel and Look. Non-slip epoxy floors have a rough consistency which creates positive traction and reduces the possibility of slipping and falling.
Why did my epoxy floor bubble?
When bubbles appear in a freshly applied epoxy coating, the most common culprit is something called “outgassing”. Outgassing is a site condition that allows air or gas from the concrete substrate to escape in excess and cause blisters, craters, bubbles, or pinholes.
How do you get air bubbles out of epoxy floor?
Most epoxy resins are flammable, and a flame should never be placed directly on the surface. To remove small bubbles when the resin is still wet, use a hot air gun, or blow dryer, directly above the bubbles and it should vent out and fill with resin.
Does epoxy floors stain?
Maintenance. Stained concrete and stone epoxy flooring are both stain resistant and easy to wipe clean.
Can you wax epoxy floors?
Waxing Epoxy Floors The glossy finish you find on an epoxy floor means that it is not necessary to wax the floors regularly. If you find that your epoxy painted floors may have lost their overall luster, you can then apply some coats of wax to shine your floors and protect them.
Can you use bleach on epoxy floors?
We strongly recommend that you do not use any strong chemicals like ammonia or bleach to clean your epoxy floor. We do suggest that you regularly clean your epoxy floor with some warm water and a squeegee to keep it stain-free and prevent grime build-up.
Can you power wash epoxy floors?
If the garage epoxy floor becomes extremely dirty you can mix up some dish washing liquid or some Simple Green and wash the floor down with that and a garden hose. Pressure washing is now no longer necessary but OK to do if you want to. It’s very simple and easy to keep your epoxy floor looking brand new.
Can you steam mop epoxy floors?
Yes, as steam cleaning has qualities that enable the steam to lift harsh stains such as grease, it is the preferred method for cleaning hard epoxy floors. Epoxy floor coatings are extremely durable and resilient, and will maintain their shine come sunshine and rain.
