Table of Contents
Best filtration: MPR 1500 to 2800.
What is a good MPR rating?
A good MPR rating to start at is MPR 600. Filters with an MPR 600 rating strike a good balance between filtration efficiency and airflow. If you are susceptible to allergens such as fine dust or pollen, moving up to an MPR 1000 filter is the next step in air filtration efficiency.
Is MERV 11 better than 12?
The difference between 11 and 12, therefore, is quite negligible. We do not carry MERV 12; MERV 11 does just as good a job. MERV 12 filters trap 80 to 89 percent of average particles of 1.0 to 3.0 microns, with an average particle size efficiency of 90 percent or better. As you can see, they’re pretty close.
Is MERV 11 or 13 better?
A MERV 11 rated furnace filter can trap the majority of harmful contaminants that are present in the air. A MERV 13 filter is capable of filtering out all particle impurities like dust, lint, pollen, mold, dust mites, pet dander, smog, and smoke. On top of this, it can also trap bacteria and viruses.
Is MERV 13 too high?
Filters within a MERV rating of 17-20 are almost never necessary in a residential home. A MERV rating of 13-16 is considered hospital level air quality, so it is unlikely your home needs any more than that.
What MERV rating is filtrete 2200?
MERV 13 Attribute Name Value Filter Life 3 months MERV Rating MERV 13 MPR Rating 2200 Overall Thickness (Imperial) 1 in.
What MERV rating is filtrete 1500?
Features: Electrostatically charged pleated filter traps 90% of larger airborne particles, like pollen, mold spores and dust mite allergen. Also captures pet dander, bacteria, viruses, and other microscopic particles. Carries 3M’s Microparticulate Performance Rating (MPR) of 1500 (equivalent to a MERV 11 rating).
Is MERV 11 too restrictive?
A MERV 11 air filter has a higher efficiency rating. Meaning, it can capture finer particles and clear more contaminants out of the air. In most cases, a MERV 11 air filter isn’t too high for residential use.
What MERV rating is best for home use?
As a general rule, residences do not use higher than MERV 8 filters. We do recommend that everyone uses filters that have at least an 8 MERV rating. These filters will remove the majority of pollutants from your indoor air.
What MERV rating does Rheem recommend?
What MERV rating does Rheem recommend? Rheem recommends filters of MERV 8 and above. This MERV level is strong enough to remove substances like pollen, dust mites, dust and pet dander from the air.
Is MERV 13 too high for home?
MERV 13 air filters are the highest-rated air filters for home use. Any air filter with a rating higher than 13 will restrict air flow to the point of which could cause damage to your HVAC system, resulting in an added expense to fix it.
Are MERV 13 filters worth it?
A MERV 13 filter is a step in the right direction and captures more particles than a typical MERV 8 filter. However, it is not as good at capturing small virus sized particles like a HEPA can. A MERV 13 will trap less than 75% of air particles that are 0.3-1.0 micron in size (the coronavirus is 0.1 microns).
Can I use a MERV 13 filter in my furnace?
MERV 13 is the highest MERV value safe for residential furnaces; the higher ratings are used primarily in commercial units. If you are wondering what MERV to try, keep these recommendations in mind; ASHRAE recommends MERV 6 or higher.
How often should MERV 13 filters be changed?
For Merv 8, 11 and 13 filters, we recommend that you change your filter at least every 3 months, however changing your filter every 2 months provides better filtration which provides healthier and cleaner air in your home.
Can I use MERV 13 in my HVAC?
Minimum Efficiency Reporting Values, or MERV, reports a filter’s ability to capture particles. Filters with MERV-13 or higher ratings can trap smaller particles, including viruses. Many home HVAC systems will have a MERV-8 filter installed as the default. Be sure the HVAC filter is correctly in place.
What MERV Can my furnace handle?
The ideal MERV filters for both air filtering and furnace efficiency are 7-13, experts say. These filters can be used without any modifications to your equipment. Your system may handle MERV 14-16 with no discernable stress.
What MPR is MERV 13?
The MPR system is the superior standard. 2 MERV 12 35% 80% MPR 1500 54% 83% MERV 13 50% 85% MPR 1900 62% 87% MPR 2200 69% 90%.
What MERV rating is filtrete 1900?
MERV 13 Attribute Name Value Filter Life 3 months MERV Rating MERV 13 MPR Rating 1900 Overall Thickness (Imperial) 1 in.
Is MERV the same as MPR?
While MERV ratings reflect a filter’s ability to trap both microscopic and macroscopic particles, MPR ratings only grade a filter on its capacity to remove particles from 0.3 to 1 microns. 2 and 8 microns, while pollen starts at 7 microns and can get up to 70 microns in size.
What MERV rating is filtrete 1200?
MERV 11 Attribute Name Value Filter Life 3 months MERV Rating MERV 11 MPR Rating 1200, 1200D Overall Thickness (Imperial) 1 in.
Do Filtrete filters have a MERV rating?
The Filtrete Advanced Allergen , Filtrete™ Ultra Allergen , Filtrete Micro Allergen , and Filtrete Dust & Pollen are rated as MERV 12, MERV 11, MERV 11 and, MERV 8, respectively. 3M highlights the portion of the ASHRAE 52.2 test that focuses on sub-micron particles with its own performance rating.
What is furnace filter MPR rating?
MPR (Microparticle Performance Rating) This rating includes microscopic particles not visible to the naked eye. Filtrete™ Brand technology makes it possible to capture the tiniest particles – between 0.3 and 1 micron in size — including bacteria and viruses through select high-performing filters within the portfolio.
