Table of Contents
AW22 or 32 Hydraulic oil is recommended for the log splitter. Automatic transmission fluid can be substituted and should only be used instead of hydraulic oil when temperatures are below 32 degrees F.
What is the difference between 32 and 46 hydraulic oil?
32 is thinner, No. 46 is medium and No. 68 is thicker. Generally speaking, if the temperature is low in winter, use #32 & #46 hydraulic oil with a lower viscosity, and use #68 hydraulic oil with a higher viscosity in summer.
Can you use tractor hydraulic oil in a log splitter?
Would tractor hydraulic fluid hurt a log splitter? No. But the pump is designed for a single viscosity – AW46 typically, AW68 in extreme hot weather, or maybe an AW32 if you’re in the arctic. A tractor hydraulic fluid is closer related to 10w30, it is fairly multi-viscosity.
How much hydraulic fluid does a log splitter use?
Each log splitter is different in how much hydraulic fluid it takes. Most reservoirs 3.5 to 7 gallons depending on the size and power of the machine, but you should always check with your specific model’s need and manufacturer’s recommendations.
Which is better AW32 or AW46?
As such oil rated as AW-32 is neither better or worse than one rated as AW-46. The numbers refer only to the viscosity – AW means Anti-Wear – not to the quality; oil quality is dependent upon the manufacturer. For Atlas above ground lifts, AW-32 will flow better in colder weather than AW-46.
How do I choose a hydraulic oil?
When selecting the appropriate viscosity grade, look for the optimum viscosity required by the pump. This can be determined by collecting data from the pump OEM, actual operating temperature of the pump, and the lubricant properties referenced to the ISO grading system at 40 and 100 degrees Celsius.
What kind of oil goes in a log splitter?
Electric log splitters require hydraulic oil with a 10W (Winter) weight rating. This hydraulic oil type provides lubrication for gears and other mechanical parts during extreme cold and heat, effectively protecting parts from wearing down.
How often should you change hydraulic fluid in a log splitter?
How often should you change hydraulic fluid in a log splitter? A lot of manufacturers will advise that you should change your fluid after every 50 hours. However, if the fluid used is of high quality this will usually give you around 150 hours of log splitting operation.
What type of oil does a log splitter take?
What Type Of Engine Oil Goes In A Log Splitter? Hydraulic oil is required for electric log splitters with a 10W (Winter) rating. In extreme cold and heat, this type of hydraulic oil provides lubrication for gears and other mechanical parts, which prevents them from becoming damaged.
Why does my log splitter bogs down under pressure?
Hydraulic systems use pressurized fluid to power a force. If your splitter is bogging down under pressure or seems weak, chances are there is something not right with how this system is operating in reference to the size of the hydraulic pump and what it is capable of.
Does hydraulic oil break down over time?
However, hydraulic fluid is a wear item itself and will degrade as it ages due to exposure to several operating factors such as excessive temperatures or various contaminants. When it degrades, it loses the ability to defend against friction and corrosion.
Does hydraulic oil have a shelf life?
The recommended shelf life for oils and greases is usually five years when stored in original sealed containers.
Is AW46 thicker than AW32?
AW32 is approximately a 10 weight oil with the additives. AW46 is approximately a 15 weight oil with the additives. AW provides many of the advantages of premium hydraulic oil at a moderate price. Suitable for use in applications where a Premium AW product is not required.
What weight is AW46 hydraulic?
contains AntiFoam additives. AW32 is approximately a 10 weight oil with the additives ▪ AW46 is approximately a 15 weight oil with the additives ▪ AW68 is approximately a 20 weight oil with the additives AW –provides many of the advantages of premium hydraulic oil at a moderate price.
Is AW32 the same as iso32?
ISO 32 is simply a viscosity range for industrial oils, normally used in hydraulics, it says nothing about any additives that may be present. AW 32 is required to contain anti wear agents, it may also contain other additives, but may be harmful in certain applications.
What is aw32 hydraulic oil used for?
AW 32 Hydraulic Oils contain a zinc anti-wear additive that is designed to protect hydraulic systems and equipment by reducing wear. The quality of the base oil controls corrosion, oxidation, and suppresses foam and aeration. AW 32 hydraulic fluids have an International Standards Viscosity Grade or ISO VG of 32.
Are there different types of hydraulic oil?
Each hydraulic oil is different and based on its intended application and additives package, it can offer different benefits. In general, mineral-oil or synthetic-oil based hydraulic oils can provide the following benefits: Protection against corrosion and rust.
What is the most common hydraulic fluid?
Hydraulic Fluids Petroleum-based or mineral-based fluids are the most widely used fluids today. Water-based fluids are used for fire-resistance due to their high-water content. Synthetic fluids are man-made lubricants and many offer excellent lubrication characteristics in high-pressure and high- temperature systems.
