Table of Contents
What size sockets should I buy?
Drive Size ½-inch drive size sockets are for high-torque applications like automotive wheel replacement and when you are using a breaker bar. ⅜-inch drive size sockets are the most common and most available. ¼-inch drive size sockets are ideal when you are in tight spaces or when you are working with recessed nuts.
What is the most popular socket size?
Typically, the most commonly used types are 10mm sockets and 36mm sockets.
How do I choose the right socket?
List of Free Tips to Choose the Right Socket Set #1)Metric, SAE and Inches. #2)Drive size of the socket set. #3)Points of Socket Set. #4)Shallow vs. deep sockets. #5)Finish of the socket set. #6)Impact sockets.
What is the standard size socket set?
There are four common socket sizes: 1/4 inch (0.6 centimeters), 3/8 inch (0.9 centimeters), 1/2 inch (1.3 centimeters) and 3/4 inch (1.9 centimeters). In-between sizes are available too, starting with 1/4 inch (0.6 centimeters) and increasing every sixteenth of an inch (0.16 centimeters).
Are 6 or 12 point sockets better?
Answer: It’s true that 12-point sockets are fine for most lightweight repairs, but heavy wrenching calls for a six-point socket. A six-point socket is much less likely to slip off a stubborn fastener or round over the corners. Here’s why: (1) Six-point sockets have thicker walls, so they’re less likely to flew.
What wrench sizes do I need?
Wrenches: Standard Combination Wrenches (1/4, 5/16, 11/32, 3/8, 7/16, 1/2, 9/16, 5/8, 11/16, 3/4, 13/16, 7/8, 15/16, 1) Metric Combination Wrenches (6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19) Standard Flare Nut Wrenches (3/8, 7/16, 1/2, 9/16, 5/8, 11/16, 3/4, 7/8) Note: Each wrench may combine two sizes.
What is the most commonly used wrench?
The socket wrench aka the ratchet is the most frequently used tool in the garage.
What is the most popular spanner size?
BA sizes are the most likely to crop up in old electronic equipment and if you are working with this sort of device you may wish to purchase sizes 2BA (jaw size of 8.2mm) and 4BA (jaw size of 6.3mm), as they are the most common.
What are the 3 common ratchet drive sizes?
Available with different drive sizes — 1/4 inch, 1/2 inch and 3/8 inch — to operate different size sockets. Most operate with a geared drive; those with a higher tooth count let you operate the tool with a smaller swinging motion, which is useful when there’s little room to move the handle.
How do I know my socket size?
How to Measure Socket Drive Size In the diagram above, the three key dimensions of a socket are labeled as Drive Hole, L, and S. L indicates the overall socket length. S indicates the target size of the nut, which determines which socket you’ll need. The size of the drive hole is determined by usage and torque demand.
What are the different types of sockets?
Top 10 Types of Sockets Stream Sockets. These sockets are used on the delivery side of the network environment. Datagram Sockets. The implementation doesn’t give any guaranteed delivery as they work connectionless. Raw Sockets. Packet Sequenced Sockets. Hex Sockets. Socket Bit. Impact Sockets. Spark Plug Sockets.
What are the SAE socket sizes?
The most commonly used and sold SAE sizes for wrenches and sockets are: 5/16″ 3/8″ 7/16″ 1/2″ 9/16″ 5/8″ 11/16″ 3/4″.
What are the most common metric wrench sizes?
What are the most common metric wrench sizes? Most common are the 1/4-inch, 3/8-inch and ½-inch ratchet drivers, but ¾-inch and 1-inch sets are available for heavy-duty work.
What socket size is a lug nut?
The most common hex sizes or wheel nut / bolt sizes are 17mm, 19mm, and 21mm.
What is the advantage of a 12 point socket?
The additional points make these sockets easier to connect with the heads of fasteners. This is ideal if you are trying to work on a fastener that is hard to see or you cannot see at all. 12 point sockets are also great for use in tight spaces as they allow you to connect to a fastener at more angles.
Can I use a 12 point socket on a 6 point nut?
A 12-point end is a double-hexagon (sometimes called “double-hex”)—it has 12 points, or vertices, evenly spaced at 30 degree increments around a circle. This geometry will also fit on a 6-point fastener. Your tool will work best when it fits precisely onto the fastener.
What are 12 point bolts used for?
A lot of times, the 12-point bolts are used for a little higher clamp load. Typically, a 12-point bolt would be seen in the oil and gas industry because of the recessing head of the bolt. This will not be seen when they’re clamping together the end bolts. 12-point bolts are also prevalent in engine applications.
What size metric wrenches do I need?
Metric / Standard Wrench Conversion Chart Bolt Diameter Metric Standard 5/16″ 13mm 1/2″ 3/8″ 14mm 9/16″ 7/16″ 16mm 5/8″ 1/2″ 19mm 3/4″.
Do you need both metric and SAE wrenches?
With wrenches, you also have to deal with both SAE (Society of Automotive Engineers — AKA inches) and metric sizes. Trying to use a combination wrench that’s even 1/32 of an inch off won’t end well.
What are all the socket sizes?
Metric Socket Sizes Chart 3/8″ Drive 1/4″ Drive 1/2″ Drive 7mm 5mm 10mm 8mm 5.5mm 11mm 9mm 6mm 12mm 10mm 7mm 13mm.
What sizes are common spanners?
Metric Spanner Sizes Nominal Size Spanner Size M10 17mm M12 19mm M14 22mm M16 24MM.
What is the best brand of spanners?
Best spanner sets 2015 Introduction. Draper Expert 23017. Clarke PRO20. Sealey Premier AK63012. Siegen S0563. Laser 5752. Kennedy KEN-582-3960K. Halfords Advanced Professional Combination Spanner Set.
What is a 10mm spanner?
10mm Metric Chromed Ratchet Gear Spanner Fixed Head Combination Wrench. Tolsen 10mm metric combination wrench with head ratcheting gear spanner is suitable for professional or home mechanic. It allows for easy access and turning of hard to reach bolts without displacing wrench from the bolt head or nut.
