Table of Contents
Our Top Picks Best For Interiors. Quikrete Fast-Setting Self-Leveling Floor Resurfacer. Best for Exteriors. Rapid Set High Strength, 15 Min Set, Featheredge. Best For Cracks. KILZ Over Armor Textured Wood/Concrete Coating. Best For Flooring. Ardex Feather Finish Grey Self-Drying Cement. Best For Small Jobs. Best Premixed.
Does concrete resurfacing last?
How Long Does Resurfacing Last? Thanks to its durability, concrete resurfacing can last a long time. Considering it’s been properly installed, well cared for and the existing concrete base is strong. A properly resurfaced floor can last from 10-20+ years.
What is the best product to use to resurface concrete?
QUIKRETE® Concrete Resurfacer provides a beautiful, durable, wear resistant surface designed to withstand heavy foot and vehicle traffic. QUIKRETE® Concrete Resurfacer provides an economical alternative to removing and replacing existing old, spalled concrete.
How thick can quikrete resurfacer be applied?
One 40 lb (18.1 kg) bag of Concrete Resurfacer will cover approximately 17 ft2 (1.6 m2) of surface at a thickness of 1/4 in (6.4 mm) or approximately 90 ft2 (8.4 m2) per bag when applied at the minimum thickness with a broom or squeegee.
Is concrete resurfacing expensive?
The price of concrete resurfacing typically ranges from about $3 per square foot to $25 per square foot. However, the cost of your project will depend on a variety of factors. For our customers, cost is one of the most important aspects of a concrete resurfacing project.
How do you fix old concrete?
Patch all cracks, crevices, and holes in the old concrete surface. For hairline cracks up to 1/8 inch wide, mix four parts of Ardex Concrete Dressing to one part water. Force the thick paste into the cracks with a putty knife. For larger cracks up to 1/2 inch wide, use concrete-repair caulk.
Can you put a thin layer of concrete over concrete?
How Thin Can You Pour Concrete Over Existing Concrete? The thinnest that is usually used when pouring concrete, in general, is about 2 to 2 ½ inches. That also applies to this pouring new concrete over old concrete. Any thinner than 2 inches would be too thin.
Can you skim coat over old concrete?
If your driveway has excessive chips that detract from the overall beauty of your front yard, skim coating it will significantly improve the appearance. Pouring a thin, new layer of concrete over the old surface will smooth out any chips or pits and give you the opportunity to add color.
What happens when you pour concrete over an existing slab?
A slab poured over an existing slab is more vulnerable to frost heave damage and cracks. Patch damages as soon as they develop to prevent them from spreading, and seal the new layer with a deep penetrating sealer to prevent water damage.
Can crumbling concrete be repaired?
Crumbling concrete can be repaired before crazing occurs. Crumbling concrete is not just unsightly, it may also be a sign of serious damage beneath the structure. Address the problem as soon as possible to prevent it from spreading or causing other damage, such as crazing, in which a network of random cracks occurs.
Can cracked concrete be resurfaced?
Concrete resurfacing to cover larger cracks or surface problems. Large cracks or holes greater than ¼”, spalling (horizontal peeling or chipping of the surface), and discoloration can be covered with resurfacing or a concrete overlay (a thin layer of cement-based material applied directly over the existing concrete).
How thick can you resurface concrete?
1 Unlike other cement products, it is designed to be applied in very thin coats (no more than 1/2 inch thick), and its additives provide good adhesion to an existing slab. Concrete resurfacer is a very strong product, rated for compressive strength of about 4,500 psi.
Is quikrete as strong as regular concrete?
Quikrete fast setting concrete is just as strong as regular concrete. Concrete gets its strength from a chemical reaction that occurs over time during curing. After it’s had time to cure, which usually take 28 days to complete, Quikrete can reach strengths up to 5000 psi.
Can you paint over quikrete concrete resurfacer?
Concrete sealer is available at hardware and home improvement stores. You can paint over Quikrete Vinyl Concrete Patcher. Quikrete Vinyl Concrete Patcher is a fast-drying repair material for concrete surfaces, including driveways, walls and walkways.
How do you bond old and new concrete?
The chemical approach involved mixing up a liquid bonding agent that helps bond new concrete products to old. Products like Sakrete Top ‘N Bond and Sakrete Flo-Coat already contain polymers that greatly improve the bond of portland cement and should NEVER be used with a liquid bonding agent.
What is the cost of concrete resurfacing?
Average Concrete Resurfacing Prices Average Cost $400 High Cost $500 Low Cost $300.
What is the average price for concrete resurfacing?
It costs from $25 to $150 per square metre to resurface concrete slabs of different purpose. Keep in mind that not all concreters will accept small projects for this price. Some of them charge a minimum of $1200 for a concrete resurfacing jobs regardless of the size of the area.
How much does resurfacing a house cost?
The average cost to stucco a house is $6 to $9 per square foot, including materials and labor. Applying stucco over brick or resurfacing costs less at $3 to $6 per square foot. To re-stucco a house, add $1 per square foot for stucco removal costs.
Do it yourself repair concrete?
Steps 1Remove the damaged concrete from the path. Use your concrete saw to cut the damaged parts from the rest of the path. 2Make a straight edge for the concrete path with formwork. 3Make a curved edge for the concrete path with formwork. 4Pour concrete into the formwork mold and level it off.
How do you cover old concrete?
Cover Your Concrete Patio – Ideas Fake A Concrete Patio Cover Up With Stain. How to Cover Your Patio with Paint and Make It look Like Tile. Use Pavers to Cover Your Concrete Patio. Use Tile To Cover a Concrete Patio. Concrete Patio Idea – Cover Up with a Deck! Another Concrete Patio Cover Up Using Stain.
How do I clean concrete?
Simply fill a spray bottle with equal parts water and vinegar (or water and baking soda), and add a little bit of liquid dish detergent. Spray the mixture on your concrete surface and let it sit for about 30 minutes. Then scrub and rinse your concrete.
