Table of Contents
Related products.
Is T1-11 better than plywood?
T1-11 Siding Explained T1-11 siding comes in two major grades: plywood and OSB, which stands for ‘Oriented Strand Board. However, the plywood version of T1-11 is far superior overall to the OSB version because of its greater durability and the variety of finishing options it offers.
What does T1-11 stand for?
Plywood and other compressed wood siding products are an inexpensive way to sheath outdoor buildings, sheds and other projects. T1-11, sometimes noted as T111 or T1, is an example of one of many such wood siding products. The ‘T’ in T1 stands for “textured,” which references the grooves or channels cut into the siding.
Is T1-11 siding waterproof?
T1-11 siding is not waterproof because it is not treated with any resins and chemicals that repel moisture. T1-11 siding needs to be protected against the weather with primer, paint, or stain. You also need to caulk around doors, windows, joints, and nails to keep the water out.
Do you need plywood under T1-11 siding?
It is best to check the local building code to determine if plywood sheathing is required. Even though it may not be considered necessary, many builders feel it is best to use plywood under T1 siding if the structure will be used for human habitation.
Is T1-11 siding structural?
In some construction techniques the use of T1-11 can act as both a wall cladding and sheathing all in one. These panels need to be rated for structural use. The disadvantage is structural T1-11 has limited styles it is fairly high maintenance and many feel that it has a “cheap look”.
What does T1-11 look like?
T1-11 siding begins as a blank slate. Grooves are carved into the board to recreate the look of the natural appearance of wood. A few different popular styles are clapboard, shiplap, and board and batten . Other popular textures are sanded, rough sawn, or smooth finish .
Is T1-11 tongue and groove?
All types of T1-11 siding have outer edges with 3/8-inch wide lips on the long sides, designed to overlap the piece that was installed previously. This is not a tongue-in-groove joint, but rather a lap joint. Panels are always installed with the grooves running vertically.
What type of siding is T1-11?
T1-11 siding is a wood or wood-based siding product that reached its height of popularity in the 60’s, 70’s and early 80’s, when a more natural, wood-grained look was all the rage.
How much does a sheet of T1-11 cost?
T1-11 Plywood Costs Depending on the finish and size, this siding costs between $25 and $40 per 4 foot by 8 foot sheet. Add installation costs and construction materials, and you end up with a range between $3.50 and $7.20 per square foot.
What is the cheapest siding?
Vinyl siding is also one of the cheapest siding options on the market, both in material and installation costs. Vinyl siding can be installed quickly and can even be installed directly over existing material. The average price of vinyl siding is $2 to $7 per square foot, installed.
Is it better to paint or stain T1-11 siding?
Plywood T1-11 accepts stain well and takes on a grainy appearance that blends well in rural surroundings. Staining T1-11 is less work than painting it — you may need only one coat — but prior cleaning of the substrate is even more important, because any dirt and discoloration shows through.
What is better than T1-11?
It can stand up to harsh weather in any climate and resists damage from termites and fungal decay. How to Decide: If you want the most durable siding available, then LP wood siding is your better choice. If you want to sacrifice some durability for savings, then choose the plywood grade over the OSB T1-11.
Should you paint or stain T1-11?
T1-11 siding is wood or wood-based siding for your home. You should paint T1-11 siding with a high-quality acrylic exterior paint.
Can T1-11 be hung horizontally?
If you carefully read the instructions, you will not find any instructions that say it cannot be installed with the grooves horizontal. Rather, they only show it installed vertically.
Does T1-11 need to be sealed?
It is sometimes called T1-11. Plywood should be treated or primed before installation to ensure it is completely protected from the elements. Sealing the material is a fairly straightforward job if the siding you purchase is not green.
How do you seal the bottom of T1-11 siding?
Trim the siding with one-by-four-inch wooden trim, covering the gaps around windows and doors, under the soffit and on the corners of the house. Nail the trim with two-inch galvanized nails, then caulk around it with acrylic latex caulk.
How much does it cost to replace T1-11 siding?
Cost of T1-11 Siding T1-11 Siding Costs Zip Code Basic Best Installation Cost $252.00 – $384.00 $504.00 – $648.00 Total $372.00 – $576.00 $744.00 – $984.00 T1-11 Siding – Total Average Cost per square foot $3.95 $7.20.
How do I fasten my T1-11?
T1-11 siding is designed for installation on framing with standard 16-inch spacing. You can attach them with exterior screws or galvanized nails. Wrap the house with house wrap or 15 mil tarpaper. Staple the material to the studs with a staple gun and cut openings for doors and windows with a utility knife.
