Table of Contents
Slump molds are concave forms that work just like other molds in that clay is draped over the surface of the mold. With slump molds, the inside surface of a pot is exposed, while the outer face is in contact with the mold.
What is a slump mold and how is it used?
Slump Molds – The clay “Slumps” or sags down creating a concave shape and are used when you want to add embellishments to the inside of the shape or around the lip.
What is the difference between a drape mold and a slump mold?
Convex plaster forms are known as “hump molds” or “drape molds”, while concave plaster forms are known as “slump molds”.
What is slumping in art?
Slumping is a technique that allows you to create glass in different shapes and textures. It is a process commonly used to make serving ware, such as bowls and plates, and is also effective in making unique art pieces.
What causes slumping?
Causes of slumping include earthquake shocks, thorough wetting, freezing and thawing, undercutting, and loading of a slope. Translational slumps occur when a detached landmass moves along a planar surface.
How do you pour clay molds?
When pouring, put two pieces of wood above the bucket to rest the plaster of Paris mold on, upside down, so the slip pours out evenly. Some potters recommend pouring the slip out at an angle so that the inside is even smoother. Once it’s all poured out, then slice off any excess clay from the top of the mold.
How long does Clay slump mold last?
Wait at least 3-4 hours before you take it out, sometimes a little bit longer if it’s a bigger mold.
What is a press mold?
Reproduce multiple pieces of ceramics with a mold In pottery, press molding refers to the process in which clay is forced into a mold in order to take on a certain shape. Once the mold is removed, the piece produced is a uniform replication of the inside of the mold (similar to casting with metalwork).
What is dry foot in ceramics?
Dry-Foot – To keep the foot or bottom of a pot free from glaze by waxing or removing the glaze. Glazed pottery is fired to a temperature of 1,830 – 2,010 degrees Fahrenheit. Available in red or also white. Fire – To heat a clay object in a kiln to a specific temperature. Foot – Base of a ceramic form.
What is compression molding process?
Compression molding is a process of molding in which a feeding material is placed into an open, heated mold cavity. The mold is then closed with a top plug and compressed with large hydraulic presses in order to have the material contact all areas of the mold. The charge cures in the heated mold.
What is a damp box for Clay?
What is a damp box? It is a storage container or even cabinet that stores the moisture inside of it, which then allows the clay to stay at a consistent dampness for workability. This damp box allows a potter to work on a piece for days or even months as long as the moisture inside of the damp box is maintained.
What is a foot ring?
Footrings, as opposed to flat bottomed containers, lift the piece off the table and enable glazing all of the bottom. While foot rings add extra effort to the finishing stage at fabrication, they also make it easier to glaze the ware (articles can be dipped and quickly sponged to remove the glaze).
How do you make a slump mold out of plaster?
How to Make a Plaster Hump Mold for Clay – Easy Drape Molds
- STEP 1: Selecting a Plastic Bowl to Make a Plaster Hump Mold. Use a Bowl with a Bit of Flex. Avoid Undercuts.
- STEP 2: Use a Release Agent.
- STEP 3: Measure Out Your Water.
- STEP 4: Mix Your Plaster. Important!
- STEP 5: After Pouring Your Mix. Getting Rid of Bubbles in Your Plaster:
- STEP 6: Removing Your Plaster Hump Mold.
What is fusing slumping?
Glass Slumping Tutorial Slumping glass describes the process of melting a piece of glass into a mould in a kiln. Often, but not always, it is a piece of fused glass that is then slumped to form a bowl or a plate. Fusing and slumping are two separate processes that…
What are glass slump molds made of?
The key is to make the mold out of the right material which will withstand the 1,200 degree temperature in the kiln. This example explains how molds are made from clay. There are two basic types of molds in glass slumping. Hump molds are used to form the interior of the slumped glass.
How do you make a clay bowl by hand?
DIY HAND-PAINTED GLAZED CLAY BOWLS.
- Knead your air dry clay until it is soft and easy to work with.
- Roll the clay out to around 5 mm thick.
- Lay a bowl on top and cut around it using a knife or clay cutting tool.
- Turn your bowl upside down and place your clay circle on top.
- Gently press the clay down around the bowl.
How do ceramic molds work?
Very simply, the casting process creates a clay shape from a mold. Slip (liquid clay) is poured into the plaster mold. When the casting’s thickness is between ⅛ and an inch thick (total time in mold – 15-18 minutes), you can separate the two halves of the mold to remove the greenware (unfired clay shape).
How do you use a slump mold?
How to Use Your Slab Roller and Slump Mold to Make a Bowl
- Step 1: Materials Needed. You will need:
- Step 2: Wedge Clay and Begin Rolling Out.
- Step 3: Poke Bubbles and Flip the Clay.
- Step 4: Smooth the Surface of Your Slab.
- Step 5: Gently Lay the Slab Over Your Mold.
- Step 6: Press Over Mold.
- Step 7: Cut Around Edge
- Step 8: Finish the Piece.
What is draping in pottery?
Drape molds are molds or forms (usually of plaster) that is used to shape materials such as glass, clay, wax, etc. We can see molds made of wood, plastic, bisque clay, or other substances. In hump molds, the shaping is done by draping slabs of the material to be shaped over the mold/hump.
What is a clay slab slump mold?
Slump Molding This works best for shallow forms. Deep bowls will require the slab to be cut, removing excess clay, in order to form smoothly into the mold. An oversized slab is laid over the top, then the mold is raised and gently dropped to encourage the clay to settle down in the middle.
