Table of Contents
The torque slip curve for an induction motor gives us the information about the variation of torque with the slip. The slip is defined as the ratio of difference of synchronous speed and actual rotor speed to the synchronous speed of the machine.
What is the slip?
A slip is a woman’s undergarment worn beneath a dress or skirt. A full slip hangs from the shoulders, usually by means of narrow straps, and extends from the breast to the fashionable skirt length. A half slip (or waist slip) hangs from the waist.
What is the relationship of torque and slip?
If torque increase than the slip will decrease and if slip increase than torque will decrease.
What are the torque slip characteristics?
The induction motor torque varies from zero to full load torque as the slip varies. The slip varies from zero to one. It is zero at no load and one at standstill. From the curve it is seen that the torque is directly proportional to the slip.
What is slip formula?
Formula to find slip = (ns – n) x 100/ns. substitute the values in the above formulas. speed difference = 1500 – 1450. = 50. slip = 50/1500 x 100.
What is torque and speed?
Torque is the rotational equivalence of linear force. Speed measures the distance covered in unit time. The torque of a rotating object can be mathematically written as the ratio of power and angular velocity.
What is Torque slip characteristics of induction motor?
The Torque Slip Characteristic is represented by a rectangular hyperbola. For the immediate value of the slip, the graph changes from one form to the other. Thus, it passes through the point of maximum torque when R2 = sX20.
What is sleep in AC motor?
“Slip” in an AC induction motor is defined as: As the speed of the rotor drops below the stator speed, or synchronous speed, the rotation rate of the magnetic field in the rotor increases, inducing more current in the rotor’s windings and creating more torque. Slip is required to produce torque.
What is the relation between speed and slip?
It is common to express the slip as the ratio between the shaft rotation speed and the synchronous magnetic field speed. When the rotor is not turning the slip is 100 %.Number of poles, frequencies and synchronous induction motor speed.
| No. of Magnetic Poles | Frequency (Hz) | |
|---|---|---|
| 50 | 60 | |
| 16 | 375 | 450 |
| 20 | 300 | 360 |
Can slip be negative?
From the above equation it is clear that, for slip to be negative, the rotor speed should be greater than synchronous speed. Hence,Negative slip is a situation when an induction motor becomes an Hence,Negative slip is a situation when an induction motor becomes an induction generator.
How is slip torque calculated?
- Wheel slip Torque of a car (T or tau) = Force F exerted by the wheel on the road X Distance travelled by the wheel during a particular given time d x sin theta.
- T= F x d = m.a d.sin theta = m.
What is full load slip?
At full load the speed of the motor is 1350 rpm. Hence slip at full load = 5.33% When the motor is so loaded that the rotor speed is reduced to 0, the value of Slip is 1. Hence, value of Slip gradually increases from no-load to full load.
What is slip speed?
The speed at which the induction motor work is known as the slip speed. The difference between the synchronous speed and the actual speed of the rotor is known as the slip speed. In other words, the slip speed shows the relative speed of the rotor concerning the speed of the field.
What is slip percentage?
The difference between theoretically calculated forward speed based on angular speed of the rim and rolling radius, and actual speed of the vehicle, expressed as a percentage of the latter, is called ‘slip ratio’.
What will happen when the slip is 100 and zero?
What will happen when the slip is 100 and zero? As the rotor ends are short circuited current flows through the rotor. So when slip is zero there is no phase difference between stator flux and rotor flux and there is no torque exerted on rotor and rotor does not rotate .
How is slip in motor calculated?
Slip speed is the speed difference between the Synchronous speed and Rotor speed. Slip speed = Synchronous speed – Rotor speed = Ns -N. Slip, s = (Ns – N) / Ns.
What is the starting torque?
Starting torque is the torque transferred by the shaft coupling during run-up (see Start-up process). It is calculated based on the ratio of power (P) to angular velocity (ω) and is represented as a rotational speed function.
What is slip in 3 phase induction?
Slip in Induction Motor is the relative speed between the rotating magnetic flux and rotor expressed in terms of per unit synchronous speed. It is a dimensionless quantity. The value of slip in induction motor is can never be zero.
What is a high slip motor?
A high slip motor allows the torque to increase torque per amps even as the motor moves from fixed speed to the locked rotor state. Standard NEMA Design A, B, or C motors operate at one to five percent slip. A NEMA D motor has a high slip of five to thirteen percent.
How do slip rings work?
HOW DOES A SLIP RING WORK? A slip ring passes electrical signals and power across a rotating interface using sliding electrical contacts. These contacts are typically a rotating ring and a stationary brush, or wiper, that slides along the ring surface during rotation.
Is torque a slippage?
Torque is the twisting force that the engine produces. The torque from the engine is what moves your car. The various gears in the transmission and differential multiply the torque and split it up between the wheels. The mark on the graph indicates the amount of torque that will cause wheel slip.
What is no load slip?
At no-load condition, the rotor speed is almost equal to the synchronous speed. e.g A 4 pole, 60 Hz induction motor at no load turning at ηr = 1790 RPM will have slip = (1800 – 1790)/(1800) = 0.55% Where 1800 is the synchronous speed of 4 pole, 60 Hz induction motor.
