Table of Contents
Sandless refinishing, as the name implies, involves no sanding. Instead, a technician uses a machine with abrasive pads and a liquid solution to remove surface debris from the floor. The floor is lightly scuffed as the liquid etches away debris. Because no sanding is done, very little, if any, dust is produced.
How long does Mr Sandless last?
We have a five year warranty that our finish will not peel, crack, chip, or yellow! There are many variables that go into determining durability, but with proper care, a floor finished by Mr. Sandless will last for many years.
Is dustless floor refinishing really dustless?
Although it’s called a “dustless” process, in reality it’s not completely dust-free. There will always be a small amount of dust created and released into the air during any hardwood floor finishing process.
What is dustless floor refinishing?
Dustless floor refinishing involves the use of a hardwood sander to strip the old finishing off the floor, thus removing flaws in the finish and exposing the bare wood of your floor. This process of refinishing usually kicks up dust particles that can be harmful to your lungs and your belongings.
Who owns Mr Sandless?
Praz – CEO – Mr. Sandless | LinkedIn.
Can wood floors be stained without sanding?
The best way to refinish wood floors without sanding is to use a technique called screen and recoat. This involves scuffing up the finish with a floor buffer and applying a refresher coat of finish. The former is a proven floor restoration method, while the latter is the “Hail Mary” pass of floor care.
How does Sandfree floor refinishing work?
Sandless refinishing, as the name implies, involves no sanding. Instead, a technician uses a machine with abrasive pads and a liquid solution to remove surface debris from the floor. The floor is lightly scuffed as the liquid etches away debris. Because no sanding is done, very little, if any, dust is produced.
Can engineered wood floors be sanded and refinished?
Refinishing engineered hardwood floors is ideal if your wear layer is thick. You may be able to refinish your flooring up to three times if the wear layer measures at least three millimeters thick. A wear layer that’s less than two-millimeter thick can sustain damage if you refinish it more than once.
How do you remove dog scratches from hardwood floors?
Clean the area. Apply a small amount of hardwood cleaner directly to your rag and clean the area in and around the scratch. Apply stain to scratch. Apply a stain-filled wood marker or another type of pigmented wood polish of your choice (in the color of the wood you’re fixing, of course) to the scratch. Apply a finish.
How do you prevent dust when sanding floors?
Here are a few tricks to keeping this dust to a minimum: Use high-quality floor sanding machines that come with a vacuum attachment. Cover furniture with sheets or other protective barriers. Keep the doors to other rooms closed to help prevent the spread of the dust. Clean regularly during the sanding job.
Do floor sanders make a mess?
Yes, when you are sanding the floors, dust is created. That is just part of the process and there is no way around it. However, there are some ways to minimize it. We always put plastic around the areas not being done, and our machines are good at collecting a lot of the dust.
How does dust free floor sanding work?
During dustless sanding, 99.8% of the resulting dust is captured and contained as opposed to being released into the air. While dustless sanding isn’t 100% dust free, it is the safest and easiest way to sand hardwood flooring today. To ensure the least dust is released, a superior dust control system must be used.
Is it cheaper to refinish or replace hardwood floors?
In general, it will almost ALWAYS be less expensive to refinish your hardwood floors. If you replace them, you need to pay for additional wood as well as ripping up and hauling away existing hardwood. Even if you have this, it will still be less expensive then replacing the whole floor.
How long does it take to get wood floors refinished?
It usually only takes about 2 days to refinish hardwood floors with water based polyurethane. (Some places will do it in 1 day, but I would recommend staying away from those places…it will last longer if you allow more drying time, and each coat needs an extra 2-4 hrs to dry.).
How do you prep hardwood floors for sanding?
How to Prepare a Wood Floor for Sanding Clear the Room Before Sanding. This is probably pretty obvious but before you begin sanding, you will want to remove all of the furniture and clear out the room. Clean the Floor. Hammer in the Nails. Remove the Baseboards Before Sanding. Protect the House From Floor Sanding Dust.
How do you get stains out of hardwood floors without sanding?
How to Remove Stains from Wood Floors Soak a cotton rag with hydrogen peroxide. Place the wet rag on the stain and allow it to soak in the wood to bleach out the stain. Remove the rag, and wipe up any excess hydrogen peroxide. Allow the floor to dry.
Can I refinish my hardwood floors?
Flooring experts estimate that hardwood floors can be sanded for refinishing up to 10 times, depending on the thoroughness of the sanding and the level of wear and tear on the floor. Situations differ, but you may not be able to refinish your hardwood floor more than 10 times.
What is the cheapest way to refinish hardwood floors?
Applying a revitalizer gloss is the simplest and cheapest way to refinish hardwood floors. This approach works best on floors that only have surface-level scratches and other minor wear and tear issues. You can get the job done without the need for equipment rentals or hard-to-find materials.
How do I make my hardwood floors look new without refinishing?
3 Approaches to Refinishing Hardwood Floors Without Sanding Use a store-bought chemical abrasion kit. Buff and recoat floors with polyurethane. Use a revitalizer.
