Table of Contents
The standard rough-in is 12 inches, though you may encounter 10-inch and 14-inch rough-ins in older homes. You should find the rough-in measurement in the new toilet’s product information.
How do I know if my toilet is a 10 or 12 rough?
If your toilet has four bolts rather than the standard two, you’ll measure to the center of the rear bolts. The standard rough-in measurements are 10, 12 and 14 inches. If your measurement is in between these intervals, round your number down to the nearest standard measurement.
Can you replace a 14-inch rough-in toilet with a 12-inch rough-in toilet?
Replace a 14-inch rough-in toilet with a 12-inch rough-in toilet. You can definitely replace a toilet with a rough-in of 14 inches with one with a rough of 12 inches. The problem with this method is that a 2-inch gap will be left between the toilet tank and the wall. Install an offset toilet flange.
What is the difference between a 12 and 14 rough-in toilet?
While 12-inch rough-ins are more generally common than 14-inch rough-ins, they both have their merits, and sometimes you need to reduce the space taken up behind the tank, which is where a 14-inch rough-in comes in handy. So if you’re looking to install 14-inch rough-in toilets, then you’ve come to the right place.
What is the rough-in distance for a toilet?
The toilet rough-in refers to the distance from the finished wall to the center of the toilet’s floor drain or waste outlet. Most toilets have a rough-in of 12 inches, although it’s not uncommon for older homes to have an unusual size such as 10″ or 14″.
How do you measure a toilet rough-in?
Measuring is done with the old toilet still in place. Start by measuring from the wall behind the toilet to the center of the bolts at the base of the toilet. If your existing toilet has four bolts, measure to the center of the back bolts. This measurement is known as the rough-in measurement.
Can you replace a 10-inch rough-in toilet with a 12-inch?
The rough-in for your bathroom plumbing should match the rough-in for the toilet. Even if a toilet is designed for a 10-inch rough-in, you can still install it in a space with a 12-inch rough-in.
Can you use a 12 inch rough in toilet?
12 Inch Rough In Toilet A 12 inch rough in is the most common measurement in bathrooms. This size allows for the most variety in the shape of the bowl and style of the toilet you purchase. Even though this is the most standard measurement, don’t forgo measuring (at least twice) before buying a new toilet.
Can you move a toilet over a few inches?
Yes, you can actually move a toilet. Even moving a toilet by a few inches without having to make a new hole in the floor is possible. You can use an offset toilet flange to move the toilet by a couple of inches on any side. This will allow you to use the same wastewater line and in turn help to save you a lot of money.
Should a toilet be flush with the wall?
No, there is no standard distance a toilet tank should set out from the wall. There are standard rough in distances, the most common is 12″ with a few at 10″ and a few at 14″, but the actually distance the tank will be from the wall will vary. Yours is quite normal.
What is chair height vs comfort height toilets?
Chair and comfort height are two different terms but they refer to a toilet of the same height. Chair height is the common term for all toilets with a height that is at least 17 inches while comfort height is a brand-specific term, for chair heights.
What is the standard height toilet?
Standard toilet height is around 14 1/2” from the floor to the bowl rim, without a toilet seat. In recent years toilet bowl height has increased to assist people with sitting and standing up, for the benefit of taller people, and those with physical handicaps and/or the elderly.
Does Kohler make a 14 inch rough-in toilet?
Highline™ Comfort Height™ Two-piece elongated 1.28 gpf chair height toilet with 14″ rough-in. With its clean, simple design and efficient performance, this Highline water-conserving toilet combines both style and function.
What is the minimum distance from toilet to wall?
Most codes require at least 15 inches (measured from the center of the toilet) from any side wall or obstruction and not closer than 30 inches center to center to any other sanitary fixture. (The NKBA actually recommends 32 inches.) There should be at least 24 inches of clear space in front of a toilet or bidet.
How far should a toilet be from the wall?
The standard distance from the back wall is 12 inches, or 12-1/2 inches from the center of the flange to the wall framing. Minimum distance in front of the toilet to the facing wall or fixture is 21 inches.
Where should a toilet flange be placed?
The toilet flange needs to be on top of the finished floor. Meaning the bottom edge of the flange needs to be on the same plane as the toilet. So if your toilet sits on the tile, the flange needs to be on top of the tile too.
Do toilets come in different sizes?
Are there different sizes of toilet? Yes, toilets come in a range of different sizes, that’s why it’s important to measure your existing toilet seat before you buy.
How do I make sure my new toilet will fit?
If the base of the new toilet is shorter than the distance between the rear bolt holes and the wall, it should fit. In small bathrooms where space is tight, also measure from the sides of the flange bolts to the sidewalls or other objects to assure side-to-side clearance.
Why would I want an elongated toilet bowl?
Elongated bowls are also considered more ‘hygienic’ in that the larger surface area of the bowl makes is easier for men and children to use with less mess. The longer bowl size is also a requirement for ADA use, and the longer/wider bowl is generally easier to use for those with mobility issues.
Is it OK to use an offset toilet flange?
Yes, all offset flanges will affect the flow somewhat, some drastically. A company named Sioux Chief makes one that I would not hesitate to use on my own home, called a Full Flush, part #889-POM (PVC) or 889-AOM (ABS).
How Far From Wall is toilet flange?
The Distance To Set The Toilet Flange From The Back Wall. You’ll want to set the center of the water closet flange 12 inches from the finished back wall. Don’t measure from the base molding! Take this measurement from the finished wall.
