Table of Contents
The Rc Wire Rc wires are for air conditioning systems or dual transformer systems. Dual transformer systems refer to a setup with a cooling and heating transformer. Rc wires connect to the RC terminals on your thermostat.
Do I use R or RC on thermostat?
In a thermostat, the R wire is responsible for powering the entire HVAC system (through a transformer). If you have both an Rh (Red-heat for powering the heating) and an Rc (Red-cool for powering the cooling), then the R wire can be connected to either Rh or Rc.
Is C wire the same as RC wire?
The C wire, or “common wire” enables the continuous flow of 24 VAC power to the thermostat. Technically speaking, power flows from the R (red) wire, but not continuously (not on its own, anyway).
Where does RC wire go on thermostat?
If you just have one wire, regardless if it’s labeled RC, it will go into the R terminal, and the jumper connecting terminals R and RC will be in place. Some thermostats have a jumper switch, some have a metal staple, others may have a plug, and the jumper may also just be a wire connecting the two terminals.
Does R wire go to RH or RC?
An R wire can go into a Nest Learning Thermostat’s Rc or Rh connector. The Nest Thermostat E only has an R connector, which is typically where an R wire would go.
Do I need a jumper from R to RC?
If you have a wire in the R terminal, and no wire in the RC terminal, use the jumper selector switch, the jumper plug, or a small jumper wire to connect the R and Rc terminals. If you have a wire in the R terminal, and another wire (not a jumper) in the RC terminal, you will not need to connect the R and RC terminals.
Is R and RC the same?
RC is no different and simply means red cooling. The wire is generally red, although there is no color standardization — but more importantly, the “R” really means that the wire and terminal are hot; it’s a live electrical wire. The RC wire connects to the RC terminal, which controls the cooling system.
What color is the RC wire on a thermostat?
Red Marking Wire Color Code Description Rc Red Power from cooling, 24 Vac transformer Rh Red Power from heat, 24 Vac transformer C Black/Blue Common of 24 Vac transformer W White Primary heat cell relay.
What if there is no C wire for thermostat?
If your current thermostat didn’t need a C-wire, it (or a wire that can be used as a C-wire) might be rolled up inside the wall. This wiring indicates a line voltage system, and you’ll need an adapter or a smart thermostat designed for line voltage.
Can I use C wire for R?
Some thermostats simply have one wire labeled R. The power from the R wire isn’t continuous and that is where the C wire comes in. The C wire completes the circuit from the R wire back to the HVAC system’s control board.
What is the difference between RH and RC thermostat wires?
The RH wire refers to “red heating” which means that this is the connection you need in order to power the heating system of your air conditioning unit. The RC wire, on the other hand, refers to “red cooling”. It’s the same with the RH wire in that it powers the thermostat. For the RC, it powers the cooling system.
What is RC or RH on a thermostat?
RC: The RC terminal is the 24-volt cooling power supply. RH: The RH terminal is the 24-volt heating power supply. Y/O: The Y/O terminal is used to control the cooling condenser. When the thermostat calls for cooling, signals are sent to power up the condenser and the blower fan, cooling your home.
What are the four wires in a thermostat?
In general, the heating wire (often white), goes into the “W” port, the cooling wire (often yellow), goes into the “Y” port, the wire that sends power from the HVAC system to the thermostat (often red), goes into the “R” port, the fan wire (often green), goes into the “G” port, and the common wire (often blue), which.
Should I use RH or RC?
RH is for the heating unit and RC is for the A/C unit. There will usually be two thermostat cables – don’t mix them up. If the air conditioning thermostat has one transformer to power both the heating and cooling system, then the wire from the transformer goes directly to the RC terminal and is called the RC wire.
Is Rh the same as R on thermostat?
R , Rh , and Rc are all the same, but not. In general terms, the R terminal is where you connect the signal voltage source. In low voltage controlled systems, there will be a step down transformer that provides the power to the control circuitry.
What’s the difference between W1 and W2?
In a conventional system, W/W1 controls your heating system and, where applicable, W2 controls your heating system’s second stage, which helps warm the home faster. In conventional cooling systems, Y/Y1 controls the first stage of cooling and Y2 controls the second stage, which helps cool down the home faster.
