Table of Contents
RC: The RC terminal is the 24-volt cooling power supply. RH: The RH terminal is the 24-volt heating power supply. When the thermostat calls for heat, a signal is sent to power up the furnace and the blower fan or the boiler, heating your home.
Do I use R or RC on thermostat?
In a thermostat, the R wire is responsible for powering the entire HVAC system (through a transformer). If you have both an Rh (Red-heat for powering the heating) and an Rc (Red-cool for powering the cooling), then the R wire can be connected to either Rh or Rc.
What does RC wire do in thermostat?
The Rc Wire Rc wires are for air conditioning systems or dual transformer systems. Dual transformer systems refer to a setup with a cooling and heating transformer. Rc wires connect to the RC terminals on your thermostat.
What’s the difference between RH and RC on thermostat?
The RH wire refers to “red heating” which means that this is the connection you need in order to power the heating system of your air conditioning unit. The RC wire, on the other hand, refers to “red cooling”. It’s the same with the RH wire in that it powers the thermostat. For the RC, it powers the cooling system.
Why is there a jumper between R and RC?
Effectively there isn’t a second RH wire, although there is an RH terminal. However, the heating still needs to be controlled, so a wire known as a jumper is connected between the RC and the RH terminals so that power gets to the heating control part of the thermostat.
Does R go into RC or RH?
An R wire can go into a Nest Learning Thermostat’s Rc or Rh connector. The Nest Thermostat E only has an R connector, which is typically where an R wire would go.
Do I need a jumper from R to RC?
If you have a wire in the R terminal, and no wire in the RC terminal, use the jumper selector switch, the jumper plug, or a small jumper wire to connect the R and Rc terminals. If you have a wire in the R terminal, and another wire (not a jumper) in the RC terminal, you will not need to connect the R and RC terminals.
What happens if you wire a thermostat wrong?
Potential consequences of improper installation could include: Electric shock. Blowing a circuit breaker. Damaging the thermostat unit, the electrical system or even the AC/furnace unit itself.
Is RC a common wire?
Here are common uses for wire colors: Blue or Black – C – Common wire, may be unused by your existing thermostat. Enables continuous power flow from the Red wire. Red – Rc – 24VAC (dedicated to heat call)Oct 25, 2014.
What are the four wires in a thermostat?
In general, the heating wire (often white), goes into the “W” port, the cooling wire (often yellow), goes into the “Y” port, the wire that sends power from the HVAC system to the thermostat (often red), goes into the “R” port, the fan wire (often green), goes into the “G” port, and the common wire (often blue), which.
Should I use RH or RC?
RH is for the heating unit and RC is for the A/C unit. There will usually be two thermostat cables – don’t mix them up. If the air conditioning thermostat has one transformer to power both the heating and cooling system, then the wire from the transformer goes directly to the RC terminal and is called the RC wire.
What’s the difference between W1 and W2?
In a conventional system, W/W1 controls your heating system and, where applicable, W2 controls your heating system’s second stage, which helps warm the home faster. In conventional cooling systems, Y/Y1 controls the first stage of cooling and Y2 controls the second stage, which helps cool down the home faster.
What does no power to Rc wire mean?
The E73 error on your Nest thermostat indicates that there is no power detected to the Rc wire. To fix this error, check your wiring, air filter, drain tubes/drip pans, and HVAC fuse and ensure that all of them are working correctly.
What is a RC jumper?
The RC Jumper is a tool available to Marcus Holloway. It is free from the 3D Printer, and can be upgraded for even more flexibility during infiltrations. To use it, simply press left on your D-pad, once you’re in a safe hiding place, the RC Jumper becomes controllable.
Do I need a jumper on my thermostat?
If your HVAC system has both heating and cooling functions, you’ll need to connect both the Rc and Rh terminals with a red wire. Because many thermostats come with a pre-installed thermostat jumper wire that connects these terminals, you only need one red wire, which could be the thermostat Rc wire or the Rh wire.
What is jumper wire used for?
A jump wire (also known as jumper, jumper wire, DuPont wire) is an electrical wire, or group of them in a cable, with a connector or pin at each end (or sometimes without them – simply “tinned”), which is normally used to interconnect the components of a breadboard or other prototype or test circuit, internally or with.
What color is the RC wire on a thermostat?
Red Marking Wire Color Code Description Rc Red Power from cooling, 24 Vac transformer Rh Red Power from heat, 24 Vac transformer C Black/Blue Common of 24 Vac transformer W White Primary heat cell relay.
Where does RC and RH wire go on nest?
Use the wiring diagram you got from the compatibility checker in step 4 to connect your system wires to the Nest Thermostat. Note: If you have an R, Rc or Rh wire, you can put it into the R connector on the Nest Thermostat. If you have a W2, Y2 or O/B wire, you can put it into the *O/B connector, if needed.
Where does the black wire go on a Honeywell thermostat?
More often than not, the black or blue wire connected to the C terminal is found in the newer “smart” thermostats. The older thermostats may not have the “C” wire; they function on-demand while the new ones function all the time (continuously 24/7).
How do I know if I have 2 stage cooling?
We think the best way to determine whether you have multistage heating or cooling is to pop your current thermostat off its base and take a look at its wires. Once you’ve popped your current thermostat off its base, look at the wires leading into the terminals, particularly the W, W1, Y, and Y1 terminals.
