Table of Contents
Quick Shine® Multi-Surface Floor Finish is actually a water-borne polymer formula, not a wax. It protects floors and gives a rich, deep glow to sealed hardwood floors, wood laminate, stone, tile, vinyl, and all other sealed hard surface flooring.
Is Quick Shine a wax?
Quick Shine is not a wax; it’s a polymer finish which means you never have to strip it off the floor. When the floor is not as shiny as you would like, just apply another coat. Holloway House makes a kit that has a microfiber mop and a small bottle of Quick Shine, and that will be all you need.
Is Quick Shine safe?
Product description Quick Shine is safe to use in homes with kids and pets and is clean air and safer chemistry certified in partnership with the DFE/EPA and we proudly display their seal on all Quick Shine labeling. A family-owned company, proudly made in the USA.
Is Quick Shine good for tile floors?
The answer is YES! You can use our Quick Shine® Multi-Surface Floor Finish and Cleaner on a variety of sealed hard surface flooring, including; hardwood, laminate, tile, vinyl, linoleum, stone and more! Simply squirt and spread our cleaner with a damp microfiber mop pad for a beautiful streak free, clean floor surface.
What is Quick Shine used for?
Quick Shine Deep Cleaner was specifically developed to remove Quick Shine Floor Finish and imperfections such as trapped pet hair, dust, scuffing and ground-in dirt without harming hardwood floors or their polyurethane seal or any other type of floor surface.
What will remove Quick Shine?
A: Anytime you accidentally get any drops of our Floor Finish or Hardwood Floor Luster on your table or counter, even after it’s dried, you can use Windex or Formula 409 to remove it. Spray it on the area, let it sit for a minute or so then wipe it up with a damp cloth or sponge.
Can I mix quick shine with water?
The first quick shine that is supposed to shine your floor would look like fog on your floors, which you won’t be able to fix unless you would buy this product, which might fix the fog but will defiantly destroy your floors. You’d need to mix it with 3 gallons of water and scrub, which will again destroy your floors.
Does Quick Shine build up?
If you still have a few areas that have this build up on them, you’ll need to do it again. Doubt its that easy.. anything that shines floors that well will cause a build up..
How do I get my tiles to shine?
Combine 1/2 cup of white vinegar with 1/2 cup of ammonia and 1/4 cup of borax. Add 1 gallon of warm water to the ingredients and stir slightly to combine them well. Mop the tile floor with the cleaning solution, then rinse the floor well. Allow the floor to air-dry completely.
Can you use quick shine on countertops?
If you don’t want to mix your own cleaning solution, you can use floor cleaners like Bruce Hardwood and Laminate floor cleaner or Quick Shine Multi-Surface Floor Cleaner from Holloway House. Because countertops and floors are such dominate features in a home, it makes sense to keep them looking good.
How do you use Quick Shine?
Directions: Pour Quick Shine® Floor Finish on a clean, dry floor. Spread evenly with a freshly rinsed sponge mop or microfiber mop. Dries to a gloss in 30 minutes. After floor is completely dry, additional coats can be applied if a higher gloss is desired.
How often can you use Quick Shine?
Every 2-4 months reapply a fresh new coat of Quick Shine® Multi-Surface or Hardwood Finish to enhance the glow.
What is the best wood floor polish?
OUR TOP PICK: Weiman Wood Floor Polish and Restorer. EDITORS CHOICE: Bona Hardwood Floor Polish (High Gloss) BEST VALUE: Howard Feed-N-Wax Wood Polish and Conditioner. RUNNER UP: Quick Shine High Traffic Hardwood Floor Luster and Polish. RUNNER UP: Rejuvenate Professional Wood Floor Restorer and Polish.
How long does it take for quick shine to dry?
The instructions suggest Quick Shine dries in 15 to 30 minutes, although I found it to be closer to 45 minutes. Quick Shine does, of course, provide a mirror finish when applied wet, but to my pleasant surprise, it held much of that shine when dry.
How do I get the shine off my hardwood floors?
Sand the gloss by hand using 240-grit sandpaper. Sand it very lightly, buffing it in quick, small strokes. Sand it just enough to take off the shine of the gloss so the next coat will stick. Vacuum up the dust.
How long does quick shine last on floors?
It is recommended to refrain from cleaning with our Floor Cleaner until the finish is fully cured (4-5 days). Periodic cleaning using our Quick Shine® Multi-Surface Floor Cleaner or Quick Shine® Hardwood Floor Cleaner via our Multi-Surface Spray Mop and microfiber pad is the recommended process.
Does Bona floor polish contain wax?
It is a protective layer, often made of urethane or wax and is usually intended to provide shine as well as protection to the permanent finish and stain. It is intended to be used on a clean, finished floor.
How do I remove Mop and Glo build up?
Regardless of the cause, the label recommends removing old coats with a solution of one-fourth cup Lysol All-Purpose Cleaner (without bleach) and one cup of household ammonia mixed into a half-gallon of warm water.
Does vinegar shine tile floors?
Yes, we’re talking about vinegar! Opting for a natural tile floor cleaner is easy and low-cost and while vinegar may not have the best smell, it can certainly make your tiles shine.
How do I get my porcelain tiles to shine again?
Step 1: Take a bucket of water and pour in a teaspoon of mild dish soap. Take the soft bristle brush or a toothbrush and dip it into the soapy water. Scrub the tile in a circular motion. Step 2: Scrub the floor till the residue is gone from the tile, now wet a cloth and wipe the leftover solution from the tile.
Can you make glossy tile matte?
Whether you plan to paint over your concrete or ceramic tile floor or simply want to do away with the shine, acid etching your floor will help you achieve the rough, matte finish you desire.
