Table of Contents
Permatex® Ceramic Extreme Brake Parts Lubricant is a purple, environmentally friendly, non-melting, pure synthetic lubricant base formula. It is formulated to lubricate under the most adverse brake conditions, assuring that critical caliper pins, sleeves, bushings and pistons remain lubricated throughout pad life.
What is ceramic brake lubricant?
Permatex Ceramic Extreme Brake Parts Lubricant is a 100% synthetic formula, coupled with real ceramic solids, making this premium brake lubricant our longest lasting, most temperature resistant way to silence brake noise.
Should you grease caliper pins?
Before we re-insert the caliper guide pins into the caliper housing, they need to be properly lubricated. But remember, it’s always best to check your vehicle’s service manual before doing this kind of work. You’re going to need some high-temperature grease. They should slide right in if you used enough grease.
Can you use all purpose grease for caliper pins?
You shouldn’t use petroleum based grease near the brakes imo. Use something silicone based so if you accidently get it on the pads or rotor it’ll eventually break down. Petroleum based ones won’t break down as easy and will stop the pads from creating friction.
Can I use red rubber grease on slider pins?
The grease is not only safe for use on rubber parts (won’t cause them to swell over time, which would be bad for the caliper pins), but also lubricates well (very good for caliper pins).
What is brake lubricant used for?
Brake Lube ensures noise-free braking and proper system operation. A thin layer of brake lubricant is that is needed. Apply lubricant on caliper pins, clips, edges of the brake pad mounting tabs, and back side of the brake pads if needed. *Do not apply lube on the friction side of the brake pads.
What is SIL Glyde made of?
Sil-Glyde® Brake Lubricant is a silicone-based brake lubricant recommended for the entire brake assembly, is compatible with plastic and rubber (EPDM & Nitrile), and dampens vibrations between contact points.
What happens if you don’t grease caliper pins?
Over time, the slide pins lose their lubrication and don’t slide the calipers so well. This lack of lubrication causes a few things to happen. While there is a rubber cover protecting the slide pins, they experience brake dust and rust buildup, which hinders the calipers from sliding.
How often should you grease caliper pins?
Now the thing here is that you should be checking your brakes and lubricating all this stuff about every 12-15 thousand miles or once a year. But, the product you use has to be designed specifically for brakes because of the excessive heat, you can’t use normal grease because normal grease will melt and go away.
What causes caliper pins to stick?
These rails can become rusty or corroded, causing the caliper to bind instead of slide. This binding results in premature inboard pad wear. Remove the rust and use the proper lubricant on the rail the pads ride on. Worn or loose slide pins or caliper slides result in caliper twist and lost brake performance.
Where do you put brake quiet?
Apply to metal backs of new brake pads; or remove squeaking pads from caliper, clean with Permatex® Brake and Parts Cleaner and apply to pad backing. DO NOT APPLY TO FRICTION SIDE OF PADS, caliper, rotors or other moving mechanisms. Allow to set for 10 minutes and reassemble. May install while tacky.
Where do you put anti seize on brakes?
Anti Seize: The only place to sparingly use anti seize lubricant is on the brake rotor center hole, where it rides on the wheel hub. On caliper slides, it will dry out and seize up, but not before destroying the rubber boots.
Can you use multi purpose grease on brakes?
Another reason for not using ordinary chassis grease or multi-purpose grease on brake components is because these products are usually petroleum-based. As every technician should know, many petroleum-based products are not compatible with the seal materials that are commonly used inside brake systems.
What can I use instead of brake grease?
Silicone grease can work just as efficiently as brake grease for all components of the braking system. Silicone is a great lubricant and preservative, especially on plastic and rubber surfaces. It can be found at home improvement stores and auto parts stores.
Can I use bearing grease on caliper pins?
As long as it’s a fully synthetic grease, you should be OK. Any petroleum in the mix WILL cause the rubber bushings to swell up and lock the pins.
What is Castrol Red Rubber Grease?
Castrol Red Rubber Grease is a medium consistency grease based on a vegetable oil and a synthetic gelling agent. It may also be used to assist assembly of natural and synthetic rubber components for automotive brake and clutch systems and suspension units but not where systems use mineral oils.
Can I use copper grease on brake slider pins?
Copper Grease is mineral based and may damage any rubber component that it comes into contact with such as rubber boots, gaiters, seals and O rings, etc. A good quality non-mineral grease should be used on moving parts only and never applied to the back face of a Brake Pad or mounting face of a Brake Disc.
Is brake lubricant necessary?
Keeping the brakes on your car lubricated is crucial to ensure that they work properly. It is critical to make sure that brake caliper grease or lubricant is applied to the correct part of the brake; an incorrectly lubricated brake can cause it to stop working entirely.
How do I make my brakes stop squeaking?
Popular Methods to Stop Squeaky Brakes Method 1: Apply Grease to the Brake Pads. Method 2: Install a Set of Shims. Method 3: Replace the Pads and Rotors.
Is SIL-Glyde synthetic?
DESCRIPTION: The material covered by this specification is a non-petroleum synthetic grease formulated to be compatible with all types of elastomer materials. Sil-Glyde Brake Lubricant withstands high temperature and won’t run or burn off.
Is SIL-Glyde same as dielectric grease?
Dielectric grease and silicone paste are essentially the same thing. Although various additives may be added depending on its intended use (automotive,marine, etc.) they are both made predominantly of silicone; silicone is made from silicone oil and fumed silica.
Is SIL-Glyde plastic safe?
Sil-Glyde® Lubricating Compound A longer-lasting, high film strength protective lubricant for all surfaces, including: rubber, metal, wood, glass, and plastic. Won’t melt, freeze, gum, or run off.
