Table of Contents
OctoPrint is an open source 3D printer controller application, which provides a web interface for the connected printers. It displays printers’ status and key parameters and allows user to schedule prints and remotely control the printer.
What is OctoPrint used for?
OctoPrint: Control Your 3D Printer Remotely with Raspberry Pi and OctoPiUntether your printer! OctoPrint provides features and tools that help optimize and control your 3D printer. With OctoPrint, you can control your printer remotely, send gcode files to print, and even monitor the progress with a camera.
Does OctoPrint work with any printer?
Out of the box OctoPrint is compatible with most of the available consumer 3D printers. And its powerful plugin system allows extending its functionality in various ways. Add support for specific printers like older Flashforge printers or older Makerbots or current Flashforge, Dremel or PowerSpec machines.
What do I need for OctoPi?
Micro or full-size SD card: You’ll need whatever fits in your Pi (likely a microSD) along with an SD adapter if your computer only takes full-size SD cards. Unless you’re planning to queue a large number of prints through OctoPrint, an 8-GB card should enough.
Is OctoPi an operating system?
Octopi is a modern and affordable software-as-a-service terminal operating system designed for small and medium sized container and mixed cargo terminals — replacing pen and paper, Excel and older TOS systems.
Does OctoPi have a GUI?
Please note that a GUI on the Pi is not needed for running OctoPrint. Installing a desktop environment on your Pi running OctoPrint (e.g. via OctoPi) is not recommended and can be detrimental to performance and thus achievable print results. Jun 13, 2020.
Can OctoPi run multiple printers?
As we’ve stated, OctoPrint doesn’t support multiple instances. Such a setup on the same server application can cause issues and use up your precious Raspberry Pi’s resources.
What is OctoPi Raspberry Pi?
OctoPrint is free, open-source software that allows you to remotely perform and monitor all aspects of your 3D printer using a Raspberry Pi computer.
Is Raspberry Pi 4 overkill for OctoPrint?
RE: Octoprint Pi 4 While a 2B will work, a 3B or 3B+ gives very good performance. A 4B also works, but is overkill and has greater power and cooling requirements, so consider a bit of extra possible expense for a proper power supply and case with cooling. It really comes down to personal preference.
How much RAM does OctoPrint need?
The short answer is no, and the long answer is that 2Gb is all you need! We’ve been testing Octoprint and 2Gb of ram is more than enough to run the service with an onboard slicer, webcam, and printer.
Can I slice with OctoPrint?
As we’ve mentioned, PrusaSlicer is a powerful 3D slicer, and integrating OctoPrint is a great way to reduce the time it takes to go from an idea to a printed object. The combination of these programs means you can slice your model, send it to your printer, and start the printing process, all from within PrusaSlicer.
How good is OctoPrint?
Octoprint gives me the ability to remotely monitor and control prints on my printers. The web interface is simple yet full featured and it can be made to work with all of my 3d printers. It also allows me to start prints when I am away so I can be more productive.
Can you use OctoPrint without Raspberry Pi?
Although not the traditional installation route, you don’t need to have a Raspberry Pi or use Linux in order to host OctoPrint on your home network. Since OctoPrint is written in the cross-platform Python programming language, it can also be installed on Windows computers.
What is the meaning of octopi?
(ŏk′tə-pī′) A plural of octopus.
What is the octopi login?
Log into your Pi via SSH (it is located at octopi. local if your computer supports bonjour or the IP address assigned by your router), default username is “pi”, default password is “raspberry”.
How do I enable SSH on octopi?
Getting Started Open the Settings in Octoprint (Wrench Icon) Open the MakerGear Settings. Check the box next to “Advanced Options” Open the “SSH Access” Tab. Click the “Turn SSH On” button. A pop-up will tell you that SSH is enabled. SSH Credentials. Host: The IP or Hostname that you use to connect to your printer normally.
Is OctoPi wrong?
While “octopi” has become popular in modern usage, it’s wrong. The letter “i” as a suffix to indicate a plural noun only applies to words with Latin roots, like “cacti” for more than one cactus. But octopus is derived from Greek, so the proper pluralization in this case would be “odes” if it was ever used.
Is OctoPi plural for octopus?
Octopi is the oldest plural of octopus, coming from the belief that Latin origins should have Latin endings. Octopuses is the next plural, which gives the word an English ending to match its adoption as an English word.
How long does an octopus live for?
Giant Pacific octopus: 3 – 5 years.
Can I use OctoPrint from my phone?
And now, with OctoRemote, you can bring the power of OctoPrint to your smartphone. OctoRemote is kind of like a companion Android app for OctoPrint, acting as an additional hand for the latter. The app emulates all the functionalities of OctoPrint but on your smartphone.
How do I update Raspberry Pi octopus?
How to Back Up and Restore Your Raspberry Pi SD Card on MacEasily backup, restore, or clone your SD card! Check for updates. Open the OctoPrint interface in your browser, as you normally would. Perform the update. Click Update now to begin the update process. Reload your browser.
How do you make a 3d printer with a Raspberry Pi?
Set Up Download the firmware and software tools from their respective websites. Write the firmware onto the SD card. (This step can be skipped if you’ll be using a network cable.) Insert the Micro-SD into the Pi. Boot (apply power to) the Pi. Log in to the Pi via SSH. Set up a username and password.
