Table of Contents
Light rail molding is designed to hide the fixtures of a cabinet’s underside lighting system. Light rail molding can consist of a separately-carved piece of wood or be made of scrap pieces taken from the original construction of the associated cabinet.
Do you need light rail molding?
A primary function of the light rail is to conceal under-cabinet light fixtures and prevent glare. The light may, however, present those seated in an adjacent living room with an unsightly view and irritating glare. If the fixture is located at the front of the cabinet, an inch of trim will solve the problem.
What is a rail molding?
Chair rail is a type of moulding that is used in the middle of a wall. Originally, chair rail moulding was added to dining rooms to protect plaster walls from getting damaged by dining room chairs. It’s a decorative element that can elevate a room’s design.
What are light rails on cabinets?
Light rail molding is a decorative trim installed on the bottom of your upper cabinets. It is also called under cabinet light rail. It comes in a variety of styles. It’s is used to conceal under-cabinet light fixtures.
What is a rail molding used for?
Light Rail Molding is used to finish the bottom of wall cabinets. It can function as a trim to conceal under-cabinet lighting fixtures and provide a barrier from the light glare, or simply serve as a decorative enhancement.
How do you hang pictures on rail molding?
The Simplest Way to Hang Your Frames from a Picture Rail Attach the D rings to the back of the picture frame about a third of the way down each side of the frame. Thread your picture wire, or other hanging material through the hooks. Attach your hook to the picture rail. Hang your frame from the hook.
What are the different types of trim?
15 Types of Trim You Should Know of 15. Crown Molding. Given its name, it’s no surprise that crown molding is the king (or queen!) of trim. of 15. Baseboard. of 15. Chair Rail. of 15. Picture Rail. of 15. Picture Frame Molding. of 15. Panel Molding. of 15. Door or Window Trim (Casing) of 15. Pierced Molding.
What does scribe molding look like?
Scribe molding is a thin strip of wood that covers gaps or inconsistencies where the cabinet meets the ceiling or wall. The piece of wood is typically straight on the end that is placed against the wall, but the other end is curved to fit the cabinet.
What is the trim on top of cabinets called?
Crown molding is decorative trim that is added to the top of your cabinets. The benefit of installing crown molding is that it draws the eye upward, showcasing the elegance of your cabinets. Crown molding can either bond with the ceiling or allow for space above the cabinet.
What is shoe molding?
Paired with a baseboard and painted to match, shoe moulding (also called “base shoe”) is a thin strip of moulding that finishes out the look of baseboards. It can often be found in a curved or round shape similar to quarter round moulding.
What is a light valance?
Light Valance is used to conceal under cabinet lighting and matches the door material. It can be installed flush with the back of the door, further back for handle-less cabinet access or excluded completely if under cabinet lighting is not used. Light Valances come in 96″ rips and will need to be cut down onsite.
How do you install a light rail cabinet?
Table of Contents Step 1: Make Sure Light Rail is Flush. Step 2: Cut First Piece of Light Rail. Step 3: Cut Second Piece of Light Rail. Step 4: Attach First Piece of Light Rail. Step 5: Cut for Front Piece of Cabinet. Step 6: Attach Front Piece to Side Piece. Step 7: Attach Final Side Piece.
What is batten molding?
Batten trim or batten molding is a thin strip of trim typically with a rectangular cross-section, used to cover seams between panels of exterior siding or interior paneling.
What is the bottom of a kitchen cabinet called?
Sometimes called floor or lower cabinets, base cabinets are the lower section of cabinetry that is installed on the floor. Makes sense, right? They are almost always capped off with a countertop of some sort, and are usually 24” deep and 36” high in American kitchens.
How much weight can a picture rail hold?
Use eyelet pairs low and also at mid-frame or higher, if necessary.) Most picture cords support about 60 pounds individually. If the item is heavier, you might use heavy-gauge wire or fine-gauge chain.
Are picture rails old fashioned?
In years gone by (and probably still now), people used these to hang pictures from (thus the name) so they weren’t having to put nails into their walls. This is quite a desirable feature for a lot of period houses. You’ll see picture rails used in Victorian, Edwardian, 1920s and 1930s houses – it’s pretty common.
Does a picture rail make a room look bigger?
There is, of course, a clever way to make a small room appear spacious – and it’ll actually save you time and money, too. Try applying just one colour such as Vardo or Pitch Blue over a picture rail and up onto the ceiling to make the room feel higher and give an illusion of loftiness. ‘Jun 18, 2019.
What are the four types of molding?
Casting, injection molding, blow molding, compression molding and rotational molding have different uses and advantages in plastic manufacturing. Plastic Molding Using Casting. Injection Molding of Plastic. Blow Molding Plastic Manufacturing. Compression Molding of Plastic. Rotational Molding of Plastic.
What’s the difference between trim and molding?
WHAT’S THE DIFFERENCE BETWEEN MOLDING AND TRIM? TRIM is a general term that refers to all molding in a home (i.e. window casing, door casing, baseboards, etc.). MOLDING (or moulding) is a broad classification of millwork (any type of woodwork that is produced in a mill …May 8, 2019.
What is the best wood for trim?
Several types of hardwoods such as cherry and walnut are commonly used for stain grade moldings and trim because of how well they absorb the stain. Softwoods such as fir or pine are regularly used for paint grade trim and moldings since it is generally less expensive and easy to work with.
