Table of Contents
G: The G terminal controls the fan relay and is responsible for turning the blower fan on and off automatically or manually via the thermostat. (Note: The RC and RH terminals are jumpered together in a four-wire heat/cool system and a single-stage heat pump system, but not in a five-wire heating/cooling system.)Jun 8, 2021.
Is G wire needed for thermostat?
G: This wire controls the blower fan, which is responsible for pushing the warm or cool air through all the vents in your house. It is not a ground wire! C: This stands for the “common” wire in an HVAC system, and it provides power to the thermostat.
What color is G on thermostat?
The G wire is green and connects to the fan. Rc and Rh: The red wire(s) are the power source for your thermostat. If your thermostat is dedicated to air conditioning only, it will have a red Rc wire. For heating and cooling systems, it will have a red Rc and a red Rh wire.
What does each thermostat wire do?
This is the most typical thermostat wiring style, and it applies to systems that regulate both heat and air conditioning. The wires are typically arranged as follows: red for 24-volt hot, white for heat, yellow for cooling, green for the fan, and blue for common (although the common wire may be a different color).
What is R wire on thermostat?
The R wire is the power wire for your heating and cooling system. If you only have one R wire (no Rh or Rc), you can connect your R wire to either Rc or Rh on the Nest thermostat.
What if there is no C wire for thermostat?
If your current thermostat didn’t need a C-wire, it (or a wire that can be used as a C-wire) might be rolled up inside the wall. This wiring indicates a line voltage system, and you’ll need an adapter or a smart thermostat designed for line voltage.
What is black wire on thermostat?
The black wire or blue wire (either color is used) is the C – “Common” wire. What does the C wire do? C wire is connected to the transformer and completes the 24V electric circuit.
Can you use G wire for C wire?
If there is no hidden C-wire, you can use a G-wire instead. However, you will not be able to use your fan independently when the heating or cooling isn’t running. Also, many HVAC systems are incompatible with this solution, including: HVAC systems using electric heat.
Where does orange wire go on thermostat?
The orange wire connects to terminal O on your thermostat. The orange wire only applies to homeowners with an air-source heat pump. Only air-source heat pumps connect to your outdoor condenser. Homeowners with geothermal heat pumps have no use for the orange wire.
What does S1 and S2 mean on a thermostat?
The S1 and S2 terminals on the Honeywell are for a remote optional sensor. Your Honeywell may have been using the S1 and S2 terminal to determine when to switch from heat pump to gas.
What does C mean on thermostat?
The C wire, or “common wire” enables the continuous flow of 24 VAC power to the thermostat. If your system doesn’t have a C-wire, you’ll need to run a new cable from your furnace to your thermostat to install most of the modern smart thermostat models. Thermostat wire is just a big spool of bundled, color-coded wires.
What color is the C wire?
Blue wires are also called “C” wires because they are the Common wire. C wires are necessary for any “smart” thermostat that needs to be connected to a power source 24/7, regardless of your heat pump type.
Do I use R or RC on thermostat?
In a thermostat, the R wire is responsible for powering the entire HVAC system (through a transformer). If you have both an Rh (Red-heat for powering the heating) and an Rc (Red-cool for powering the cooling), then the R wire can be connected to either Rh or Rc.
Do I need a jumper from R to RC?
If you have a wire in the R terminal, and no wire in the RC terminal, use the jumper selector switch, the jumper plug, or a small jumper wire to connect the R and Rc terminals. If you have a wire in the R terminal, and another wire (not a jumper) in the RC terminal, you will not need to connect the R and RC terminals.
Does R go into RC or RH?
An R wire can go into a Nest Learning Thermostat’s Rc or Rh connector. The Nest Thermostat E only has an R connector, which is typically where an R wire would go.
Can I use Nest thermostat without C wire?
Nest claims that you can use the Nest Thermostat without a C-wire. While this is true, it would be advisable to have a C-wire. A lot of Nest users have had problems when they use the thermostat without a C-wire. In the absence of a C wire, your thermostat battery charges itself by using the power from your HVAC system.
Can I install Nest thermostat without C wire?
In a system with a C-wire, the Nest charges itself from the C-wire’s current and all is fine. In a system without a C-wire, though, Nest recharges its battery when the heating or cooling runs. In most systems this, too, works fine – assuming you’re running your heating or cooling frequently enough.
Is the C wire hot?
Typically, the wires that provide the power (often called the “hot” wires) are labeled Rc (cooling) and Rh (heating).
