Table of Contents
Flocculation value is defined as the minimum concentration required of an electrolyte to cause the coagulation or flocculation of a solution. Flocculation value is inversely proportional to the coagulating power of the ion.
How do you calculate flocculation?
It is calculated by dividing the liquid volume (in gallons) of a basin by the plant flow rate (gallons per minute).
What is meant by coagulating value?
The minimum concentration of an electrolyte which is required to cause coagulation is known as coagulating value of sol. It is usually expressed in terms of milli-moles per litre. Coagulation power is inversely proportional to coagulation value.
How can flocculation be prevented?
When particles of a suspension come close together they can form aggregates called flocculates which will settle more rapidly. To prevent that we often coat the particle with a charged surfactant. The charge (Zeta potential) acts to keep the particles separate and prevent flocculation.
What is the process of flocculation?
Flocculation is a process by which a chemical coagulant added to the water acts to facilitate bonding between particles, creating larger aggregates which are easier to separate. The method is widely used in water treatment plants and can also be applied to sample processing for monitoring applications.
What is flocculating power?
Hint: Flocculating value or the coagulating value is the amount of the electrolyte which is needed so that 1 litre of colloidal solution precipitates easily. The coagulating power or flocculating power is the reciprocal of coagulating value or flocculating value.
What is flocculant for?
Used in a wide range of industries and applications, flocculants help to remove suspended solids from wastewater by aggregating contaminants into flakes or “flocs” that float to the surface of the water or settle at the bottom. They can also be used for lime softening, sludge thickening, and solids dehydration.
How often can you use flocculant?
You can reuse a clarifier after 5-7 days, but if you’re constantly seeing cloudy water, there may be other problems. Adding too much flocculant can cause its own issues.
What is the difference between flocculant and coagulant?
Coagulation is a chemical process. Flocculation is a physical process. Coagulants such as inorganic salts of aluminum or iron that neutralize the suspended particles are added during coagulation. Flocculant such as an organic polymer that involves in bridging and strengthening the flocs is added.
What is an example of flocculation?
Flocculation and coagulation treatment chemicals are used in effluent wastewater water treatment processes for solids removal, water clarification, lime softening, sludge thickening, and solids dewatering. Examples of ChemTreat coagulation products include aluminum salts, iron salts, and polyelectrolytes.
How do you calculate the flocculation value of NaCl?
Explanation: Coagulation value is the millimoles of an electrolyte that must be added to 1 L of a colloidal solution for complete coagulation . Therefore , 5 mL of 1 M NaCl = 11000×5=0.005 or 5 m moles .
What is flocculation in surface chemistry?
Flocculation, in physical chemistry, separation of solid particles from a liquid to form loose aggregations or soft flakes. These flocculates are easily disrupted, being held together only by a force analogous to the surface tension of a liquid.
Can you drink flocculant?
In addition, coagulants and flocculants are expensive, which is why you want to avoid adding more than are necessary to the water; drinking water treatment plants use “jar tests” to identify the optimal coagulant and flocculant concentrations. Do not drink any of your water samples—even if they appear clear.
What is flocculating ion?
Coagulation or precipitation:-it is a process of aggregating together the colloidal particle so as to change them into large sized particles which ultimately settles as a precipitate. The ion which is responsible for neutralization of charge on the colloidal particles is called the coagulating ion or Flocculating ion.
Is alum a coagulant or flocculant?
To accomplish this, the water is treated with aluminum sulfate, commonly called alum, which serves as a flocculant. Raw water often holds tiny suspended particles that are very difficult for a filter to catch. Alum causes them to clump together so that they can settle out of the water or be easily trapped by a filter.
What is difference between flocculation and Deflocculation?
The key difference between flocculation and deflocculation is that flocculation is the formation of flocs by the clumping of fine particles, whereas deflocculation is the dispersion of flocs to form a stable colloid. Flocculation refers to the formation of clumps from fine particles in a colloid.
What is the flocculation value of NaCl when 5 ml?
For the coagulation of 100 ml of arsenious sulphide solution, 5ml of 1M NaCl is required. Calculated the flocculation value . The minimum number of moles of electrolyte per litre required to cause precipitation is called flocculation value. Flocculating value of NaCl is 50 millimole L-1.
How does cationic flocculant work?
Cationic cellulose-based flocculants, hold positively charged groups, which are fundamental for the neutralization of negatively charged suspended dye molecules. Also, due to the relatively long chains of the polymers with medium charge densities, bridging between the particles will be a complementary mechanism.
What is flocculant made of?
The aluminum-based flocculants include aluminum sulfate, aluminum chloride, sodium aluminate, aluminum chlorohydrate, and polyaluminum chloride. The iron-based flocculants include ferric chloride, ferric sulfate, ferrous sulfate, and ferric chloride sulfate [15, 69].
What is flocculation value of NaCl when?
Therefore, flocculation value of NaCl = 4.
How long does flocculant take to work?
Flocculant, although fast-acting, will still need around 8-16 hours to work its magic. It’s easiest to do this overnight. The pump definitely needs to be off as you want the water to be still. The floc will have settled at the bottom of the pool and will require manual vacuuming to remove the debris.
What is hardy Schulze rule?
> Hardy Schulze rule states that the amount of electrolyte required for the coagulation of a definite amount of a colloidal solution is dependent on the valency of the coagulating ion. Hardy and Schulze observed that greater the valency of the flocculating ion or coagulating ion, the greater is its power to coagulate.
