Table of Contents
A Flocculation Test Procedure is used to determine how much Flocculants need be added to solids in suspension (slurry or pulp) to cause the individual particles to collect in the form of flocs. The formation of flocs aids in improved settling rates, better overhead clarity and/or faster filtration rates.
What is meant by flocculation?
Flocculation is a process whereby small particles in suspension are caused to aggregate, giving large clusters (flocs) that are much more easily separated than the original particles. The process is in widespread use in many industrial applications.
What is an example of flocculation?
Flocculation and coagulation treatment chemicals are used in effluent wastewater water treatment processes for solids removal, water clarification, lime softening, sludge thickening, and solids dewatering. Examples of ChemTreat coagulation products include aluminum salts, iron salts, and polyelectrolytes.
Why do Flocculated particles not cake?
Repulsive forces between particles are overcome and a hard cake is formed which is difficult, if not impossible, to redisperse. The sediment is loosely packed and possesses a scaffold-like structure (large volume of final sediment). Particles do not bond tightly to each other and a hard, dense cake does not form.
Is flocculant harmful to humans?
Corrosive Product, contact with eyes or skin can cause burns; ingestion or inhalation can cause internal damage, if this occurs immediate medical assistance is required. Contact with skin: irritation. Contact with eyes: irritation. Swallowing: irritation to mucosal and digestive tract corrosion.
Why is flocculation important for treating water?
Conventional coagulation–flocculation-sedimentation practices are essential pretreatments for many water purification systems—especially filtration treatments. These processes agglomerate suspended solids together into larger bodies so that physical filtration processes can more easily remove them.
What two chemicals are commonly used as water coagulants?
Aluminum sulfate (alum) is the most common coagulant used for water purification. Other chemicals, such as ferric sulfate or sodium aluminate, may also be used.
Is Vinegar a Deflocculant?
Vinegar is often used in ceramic slurries to change the viscosity (thicken it). While there are more effective flocculants (e.g. calcium chloride, epsom salts), vinegar is popular among potters simply because it is so available.
Is Redisperse difficult?
The repulsive forces between individual particles allow them to slip past each other as they sediment. The slow rate of settling prevents the entrapment of liquid within the sediment, which thus becomes compacted and can be very difficult to redisperse.
What is difference between flocculation and Deflocculation?
The key difference between flocculation and deflocculation is that flocculation is the formation of flocs by the clumping of fine particles, whereas deflocculation is the dispersion of flocs to form a stable colloid. Flocculation refers to the formation of clumps from fine particles in a colloid.
How is flocculation done?
Surface chemistry In colloid chemistry, flocculation refers to the process by which fine particulates are caused to clump together into a floc. The floc may then float to the top of the liquid (creaming), settle to the bottom of the liquid (sedimentation), or be readily filtered from the liquid.
Is Salt a flocculant?
5.1. Inorganic salts of multivalent metals are effective flocculants. The multivalent metal cations in these salts neutralize the cell surface charge and bridge cells together to facilitate flocculation [15, 66].
What is flocculation and how does it work?
How does flocculation work? Flocculation is based on a chemical process. It involves adding chemicals to the wastewater in sequence and allowing tiny solid particles to collect together in a larger mass called a floc. As a treatment of wastewater, flocculation is carried out in stages.
What is flocculation used for?
4 Flocculation. Flocculation is a process by which a chemical coagulant added to the water acts to facilitate bonding between particles, creating larger aggregates which are easier to separate. The method is widely used in water treatment plants and can also be applied to sample processing for monitoring applications.
Does flocculant kill algae?
There are two major chemical treatments for algae: flocculant and chlorine. Flocculant, or floc, is a chemical and mechanical process that works fast but requires work on your part. Then, you must turn it off to give the algae time to settle. If you use chlorine shock, you should run the filter almost continuously.
What makes a good flocculant?
Polymers are useful as flocculants because they are robust molecules and sometimes carry charges. Because they are so large, small particles can get trapped in the curves of the polymer causing them to accumulate a mass heavy enough to prevent their retention in solution.
Can you use too much flocculant?
Adding too much flocculant can cause its own issues. Flocculant is aluminum sulfate, which is designed to clump with the particles you’re trying to remove. But if you add too much, the flocculant will start to agglomerate with itself instead of those particles.
Does flocculant affect pH?
Because flocculants can affect the pH level, you’ll want to start out with it at about 7.0 so you can make sure your sanitizer keeps working at maximum efficiency.
How can flocculation be prevented?
When particles of a suspension come close together they can form aggregates called flocculates which will settle more rapidly. To prevent that we often coat the particle with a charged surfactant. The charge (Zeta potential) acts to keep the particles separate and prevent flocculation.
Is alum a coagulant or flocculant?
To accomplish this, the water is treated with aluminum sulfate, commonly called alum, which serves as a flocculant. Raw water often holds tiny suspended particles that are very difficult for a filter to catch. Alum causes them to clump together so that they can settle out of the water or be easily trapped by a filter.
What is the difference between flocculant and coagulant?
Depending on the charge and chemical composition of your wastewater, flocculants can either be used on their own or in combination with coagulants. Flocculants differ from coagulants in that they are often polymers, whereas coagulants are typically salts.
How fast does flocculant work?
How Long Does It Take to Work? The beauty of flocculants is that they work fast. Your pool can be cleaned in 24 hours, whereas with a clarifier, it takes a few days for the filter to do its job. The drawback, however, is that you have to vacuum the dirt out from the pool floor by yourself.
