Table of Contents
Flocculation is a water treatment process where solids form larger clusters, or flocs, to be removed from water. This process can happen spontaneously, or with the help of chemical agents. It is a common method of stormwater treatment, wastewater treatment, and in the purification of drinking water.
What is the process of flocculation?
Flocculation is a process by which a chemical coagulant added to the water acts to facilitate bonding between particles, creating larger aggregates which are easier to separate. The method is widely used in water treatment plants and can also be applied to sample processing for monitoring applications.
What is flocculation reaction?
Flocculation is a two-step particle aggregation process in which a large number of small particles form a small number large flocs. Step 1: Coagulation. Small particles usually carry negative surface charges that hinder aggregation and settling (1a).
Is FeCl3 a coagulant?
Ferric chloride (FeCl3) is the most common iron salt used to achieve coagulation. Its reactions in the coagulation process are similar to those of alum, but its relative solubility and pH range differ significantly from those of alum. Both alum and ferric chloride can be used to generate inorganic polymeric coagulants.
What is an example of flocculation?
Flocculation and coagulation treatment chemicals are used in effluent wastewater water treatment processes for solids removal, water clarification, lime softening, sludge thickening, and solids dewatering. Examples of ChemTreat coagulation products include aluminum salts, iron salts, and polyelectrolytes.
What is difference between flocculation and coagulation?
Flocculation is synonymous with agglomeration and coagulation / coalescence. Basically, coagulation is a process of addition of coagulant to destabilize a stabilized charged particle. Meanwhile, flocculation is a mixing technique that promotes agglomeration and assists in the settling of particles.
Is alum a coagulant or flocculant?
To accomplish this, the water is treated with aluminum sulfate, commonly called alum, which serves as a flocculant. Raw water often holds tiny suspended particles that are very difficult for a filter to catch. Alum causes them to clump together so that they can settle out of the water or be easily trapped by a filter.
What’s a coagulant?
Coagulants are a substance which cause particles in a liquid to curdle and clot together. Coagulation treatment chemicals are used in effluent water treatment processes for solids removal, water clarification, lime softening, sludge thickening, and solids dewatering.
Is Lime a coagulant?
Lime (Ca(OH)2 or CaO): Lime, or calcium hydroxide, is predominantly used to adjust pH, but as a softener, it can also be used as a coagulant aid. The lime bonds with the other particles and increases the size/weight of the flocs which then increases the speed with which they settle out of the water.
What does Deflocculated mean?
: to reduce or break up from a flocculent state : convert into very fine particles : disperse or maintain in a dispersed state.
What two chemicals are commonly used as water coagulants?
Aluminum sulfate (alum) is the most common coagulant used for water purification. Other chemicals, such as ferric sulfate or sodium aluminate, may also be used.
Can you add too much flocculant?
Adding too much flocculant can cause its own issues. Flocculant is aluminum sulfate, which is designed to clump with the particles you’re trying to remove. But if you add too much, the flocculant will start to agglomerate with itself instead of those particles.
What is meant by coagulation and flocculation?
Coagulation-flocculation: The use of chemical reagents to destabilise and increase the size of the particles; mixing; increasing of flog size, A physical separation of the solids from the liquid phase. This separation is usually achieved by sedimentation (decantation), flotation or filtration.
Is Redisperse difficult?
The repulsive forces between individual particles allow them to slip past each other as they sediment. The slow rate of settling prevents the entrapment of liquid within the sediment, which thus becomes compacted and can be very difficult to redisperse.
Does flocculant kill algae?
There are two major chemical treatments for algae: flocculant and chlorine. Flocculant, or floc, is a chemical and mechanical process that works fast but requires work on your part. Then, you must turn it off to give the algae time to settle. If you use chlorine shock, you should run the filter almost continuously.
Can you drink flocculant?
In addition, coagulants and flocculants are expensive, which is why you want to avoid adding more than are necessary to the water; drinking water treatment plants use “jar tests” to identify the optimal coagulant and flocculant concentrations. Do not drink any of your water samples—even if they appear clear.
What is an example of coagulation?
Examples of Coagulation Milk proteins coagulate to thicken the mixture that forms yogurt. Blood platelets coagulate blood to seal a wound. Pectin gels (coagulates) a jam. Gravy coagulates as it cools.
What is flocculant for?
Used in a wide range of industries and applications, flocculants help to remove suspended solids from wastewater by aggregating contaminants into flakes or “flocs” that float to the surface of the water or settle at the bottom. They can also be used for lime softening, sludge thickening, and solids dehydration.
What is difference between flocculation and Deflocculation?
The key difference between flocculation and deflocculation is that flocculation is the formation of flocs by the clumping of fine particles, whereas deflocculation is the dispersion of flocs to form a stable colloid. Flocculation refers to the formation of clumps from fine particles in a colloid.
What chemicals are flocculants?
A flocculants are usually organic chemicals added to wastewater to enhance flocculation, such chemicals are alum, aluminium chlorohydrate, aluminium sulphate etc.
How do you use a flocculant drop out?
Use HTH Drop Out Flocculant Distribute the flocculant evenly over the entire pool surface. Keep the pump running for two hours and then turn off. Allow the particles to settle to the pool bottom overnight and then vacuum debris to waste. Backwash or clean the filter and enjoy crystal clear water.
Is Vinegar a Deflocculant?
Vinegar is often used in ceramic slurries to change the viscosity (thicken it). While there are more effective flocculants (e.g. calcium chloride, epsom salts), vinegar is popular among potters simply because it is so available.
Does flocculant affect pH?
Because flocculants can affect the pH level, you’ll want to start out with it at about 7.0 so you can make sure your sanitizer keeps working at maximum efficiency.
Is flocculant harmful to humans?
Corrosive Product, contact with eyes or skin can cause burns; ingestion or inhalation can cause internal damage, if this occurs immediate medical assistance is required. Contact with skin: irritation. Contact with eyes: irritation. Swallowing: irritation to mucosal and digestive tract corrosion.
How fast does flocculant work?
How Long Does It Take to Work? The beauty of flocculants is that they work fast. Your pool can be cleaned in 24 hours, whereas with a clarifier, it takes a few days for the filter to do its job.
