Table of Contents
Flocculation is the separation of a solution, commonly the removal of sediment from a fluid. The term is derived from floc, which means flakes of material; and when a solution has been flocculated, the sediment has formed into larger aggregated flakes, making them easier to see and remove.
What is flocculation in water treatment process?
Flocculation is a water treatment process where solids form larger clusters, or flocs, to be removed from water. This process can happen spontaneously, or with the help of chemical agents. It is a common method of stormwater treatment, wastewater treatment, and in the purification of drinking water.
What is meant by flocculation?
Flocculation is a process whereby small particles in suspension are caused to aggregate, giving large clusters (flocs) that are much more easily separated than the original particles. The process is in widespread use in many industrial applications.
What is difference between flocculation and Deflocculation?
The key difference between flocculation and deflocculation is that flocculation is the formation of flocs by the clumping of fine particles, whereas deflocculation is the dispersion of flocs to form a stable colloid. Flocculation refers to the formation of clumps from fine particles in a colloid.
What is flocculation used for?
4 Flocculation. Flocculation is a process by which a chemical coagulant added to the water acts to facilitate bonding between particles, creating larger aggregates which are easier to separate. The method is widely used in water treatment plants and can also be applied to sample processing for monitoring applications.
What is flocculation of soil?
Definition. Flocculation – process during which particles, for example, of a soil, dispersed in a solution contact and adhere each another, forming clusters, flocks, flakes, or clumps of a larger size. Flocculation is synonymous with agglomeration and coagulation.
What happens during coagulation?
Coagulation is a process used to neutralise charges and form a gelatinous mass to trap (or bridge) particles thus forming a mass large enough to settle or be trapped in the filter.
What chemicals are flocculants?
A flocculants are usually organic chemicals added to wastewater to enhance flocculation, such chemicals are alum, aluminium chlorohydrate, aluminium sulphate etc.
Is alum a coagulant or flocculant?
To accomplish this, the water is treated with aluminum sulfate, commonly called alum, which serves as a flocculant. Raw water often holds tiny suspended particles that are very difficult for a filter to catch. Alum causes them to clump together so that they can settle out of the water or be easily trapped by a filter.
What two chemicals are commonly used as water coagulants?
Aluminum sulfate (alum) is the most common coagulant used for water purification. Other chemicals, such as ferric sulfate or sodium aluminate, may also be used.
Is FeCl3 a coagulant?
Ferric chloride (FeCl3) is the most common iron salt used to achieve coagulation. Its reactions in the coagulation process are similar to those of alum, but its relative solubility and pH range differ significantly from those of alum. Both alum and ferric chloride can be used to generate inorganic polymeric coagulants.
How does a flocculant work?
A flocculant is a chemical that can be added to the water to help colloids and any other suspended solids bind together and form heavier particles. The heavier particles then settle to the bottom of the container/tank and the water on the top is drained off.
How is turbidity removed from wastewater?
Settling and decanting is a method to reduce turbidity by letting the water sit for 2-24 hours so that the particulates settle to the bottom of the container. The clear water is then decanted off the top into a second container.
Why is flocculation important for treating water?
Conventional coagulation–flocculation-sedimentation practices are essential pretreatments for many water purification systems—especially filtration treatments. These processes agglomerate suspended solids together into larger bodies so that physical filtration processes can more easily remove them.
What is an example of flocculation?
Flocculation and coagulation treatment chemicals are used in effluent wastewater water treatment processes for solids removal, water clarification, lime softening, sludge thickening, and solids dewatering. Examples of ChemTreat coagulation products include aluminum salts, iron salts, and polyelectrolytes.
What is flocculation test?
A Flocculation Test Procedure is used to determine how much Flocculants need be added to solids in suspension (slurry or pulp) to cause the individual particles to collect in the form of flocs. The formation of flocs aids in improved settling rates, better overhead clarity and/or faster filtration rates.
Which are two chemicals used to purify water?
Chlorine and ozone are two chemicals used to purify water.
How can flocculation be prevented?
When particles of a suspension come close together they can form aggregates called flocculates which will settle more rapidly. To prevent that we often coat the particle with a charged surfactant. The charge (Zeta potential) acts to keep the particles separate and prevent flocculation.
Which coagulant is best?
A metal based coagulant will consume alkalinity, especially in a well buffered high pH water, which could compromise the softening process. The best coagulant is therefore a pre-hydrolysed species with a high basicity. PACl has been found to be very suitable for lime softening applications.
What is coagulation and flocculation in wastewater treatment?
Coagulation and flocculation are used to separate the suspended solids portion from the water. Suspended particles vary in source, charge, particle size, shape, and density. Correct application of coagulation and flocculation depends upon these factors.
What’s a coagulant?
Coagulants are a substance which cause particles in a liquid to curdle and clot together. Coagulation treatment chemicals are used in effluent water treatment processes for solids removal, water clarification, lime softening, sludge thickening, and solids dewatering.
What is the most used coagulant?
Iron and aluminium salts are the most widely used coagulants but salts of other metals such as titanium and zirconium have been found to be highly effective as well.
What is difference between flocculation and coagulation?
Flocculation is synonymous with agglomeration and coagulation / coalescence. Basically, coagulation is a process of addition of coagulant to destabilize a stabilized charged particle. Meanwhile, flocculation is a mixing technique that promotes agglomeration and assists in the settling of particles.
Why is coagulant added to water?
Coagulant aid Chemicals (typically synthentic polymers) added to water to enhance the coagulation process. if an excess of alum is added so that the dosed water pH is less than 5.0, then the metal ions (Al3+) will directly ˜eutralize the negatively charged organic compounds and colloids in the raw water. 1.
