Table of Contents
Flocculants—The tiny size and surface charge of colloids (small charged particles) make them difficult to remove from water, so engineers turn to flocculation. Flocculation is now an essential step in many water purifications systems as a means to remove suspended solids.
What is water flocculation?
Flocculation is a water treatment process where solids form larger clusters, or flocs, to be removed from water. This process can happen spontaneously, or with the help of chemical agents. It is a common method of stormwater treatment, wastewater treatment, and in the purification of drinking water.
Why is flocculation important for treating water?
Conventional coagulation–flocculation-sedimentation practices are essential pretreatments for many water purification systems—especially filtration treatments. These processes agglomerate suspended solids together into larger bodies so that physical filtration processes can more easily remove them.
What is difference between flocculation and Deflocculation?
The key difference between flocculation and deflocculation is that flocculation is the formation of flocs by the clumping of fine particles, whereas deflocculation is the dispersion of flocs to form a stable colloid. Flocculation refers to the formation of clumps from fine particles in a colloid.
Why is flocculation important?
Used water can contain significant amounts of suspended particulate matter, which often takes long to sediment. Flocculation expedites sedimentation and ensures efficient solid/liquid separation.
What is meant by flocculation?
Flocculation is a process whereby small particles in suspension are caused to aggregate, giving large clusters (flocs) that are much more easily separated than the original particles. The process is in widespread use in many industrial applications.
How is chloride removed from wastewater?
At high concentrations, chloride can harm fish and plant life. But there’s no easy and affordable way to remove chloride in wastewater. It would require reverse osmosis, the same process used to produce water for laboratory use, which is technically difficult as well as costly.
Why is coagulant added to water?
Chemicals (coagulants) are added to the water to bring the nonsettling particles together into larger, heavier masses of solids called floc. Aluminum sulfate (alum) is the most common coagulant used for water purification.
What is the most important step in water treatment?
It is, however, an important primary step in the water treatment process, because coagulation removes many of the particles, such as dissolved organic carbon, that make water difficult to disinfect. Because coagulation removes some of the dissolved substances, less chlorine must be added to disinfect the water.
What chemicals are flocculants?
A flocculants are usually organic chemicals added to wastewater to enhance flocculation, such chemicals are alum, aluminium chlorohydrate, aluminium sulphate etc.
Why does pH affect coagulation?
Since pH values affect the surface charges and forms of the coagulants and impurities to be removed, controlling the level of pH would significantly improve the coagulation process. Therefore, not only coagulant dosage, but also pH value should be optimized to maximize the removal of impurities present in raw water.
What is the most used coagulant?
Iron and aluminium salts are the most widely used coagulants but salts of other metals such as titanium and zirconium have been found to be highly effective as well.
How is flocculation used in everyday life?
Flocculation: Particles that aggregate by the use of polymers that binds them together. They are typically used for treatment of wastewater containing colloids (suspended particles) and metal ions. But the phenomena are also well-known from everyday life – especially coagulation. A good example is sour milk.
What is the purpose of coagulation?
Coagulation is a process used to neutralise charges and form a gelatinous mass to trap (or bridge) particles thus forming a mass large enough to settle or be trapped in the filter.
What is difference between flocculation and coagulation?
Flocculation is synonymous with agglomeration and coagulation / coalescence. Basically, coagulation is a process of addition of coagulant to destabilize a stabilized charged particle. Meanwhile, flocculation is a mixing technique that promotes agglomeration and assists in the settling of particles.
Which are two chemicals used to purify water?
Chlorine and ozone are two chemicals used to purify water.
What are the three main stages of water treatment?
There are three main stages of the wastewater treatment process, aptly known as primary, secondary and tertiary water treatment. In some applications, more advanced treatment is required, known as quaternary water treatment.
Is FeCl3 a coagulant?
Ferric chloride (FeCl3) is the most common iron salt used to achieve coagulation. Its reactions in the coagulation process are similar to those of alum, but its relative solubility and pH range differ significantly from those of alum. Both alum and ferric chloride can be used to generate inorganic polymeric coagulants.
What are the four stages of water treatment?
These include: (1) Collection ; (2) Screening and Straining ; (3) Chemical Addition ; (4) Coagulation and Flocculation ; (5) Sedimentation and Clarification ; (6) Filtration ; (7) Disinfection ; (8) Storage ; (9) and finally Distribution. Let’s examine these steps in more detail.
What makes a good flocculant?
Polymers are useful as flocculants because they are robust molecules and sometimes carry charges. Because they are so large, small particles can get trapped in the curves of the polymer causing them to accumulate a mass heavy enough to prevent their retention in solution.
What is the principle of flocculation?
Coagulation – flocculation is physico-chemical process that facilitates the agglomeration of fine particles (colloids) contained in water to form a floc that can be easily filtered from water. Effluent (waste water) must be treated before it is discharged or before the water is re-used.
Does flocculant affect pH?
Because flocculants can affect the pH level, you’ll want to start out with it at about 7.0 so you can make sure your sanitizer keeps working at maximum efficiency.
Is alum a coagulant or flocculant?
To accomplish this, the water is treated with aluminum sulfate, commonly called alum, which serves as a flocculant. Raw water often holds tiny suspended particles that are very difficult for a filter to catch. Alum causes them to clump together so that they can settle out of the water or be easily trapped by a filter.
How can flocculation be prevented?
When particles of a suspension come close together they can form aggregates called flocculates which will settle more rapidly. To prevent that we often coat the particle with a charged surfactant. The charge (Zeta potential) acts to keep the particles separate and prevent flocculation.
How do we get clean water?
Boil water, if you do not have bottled water. Boiling is sufficient to kill pathogenic bacteria, viruses and protozoa (WHO, 2015). If water is cloudy, let it settle and filter it through a clean cloth, paperboiling water towel, or coffee filter. Bring water to a rolling boil for at least one minute.
