Table of Contents
Flocculants—The tiny size and surface charge of colloids (small charged particles) make them difficult to remove from water, so engineers turn to flocculation. Flocculation is now an essential step in many water purifications systems as a means to remove suspended solids.
What is water flocculation?
Flocculation is a water treatment process where solids form larger clusters, or flocs, to be removed from water. This process can happen spontaneously, or with the help of chemical agents. It is a common method of stormwater treatment, wastewater treatment, and in the purification of drinking water.
Why is flocculation important for treating water?
Conventional coagulation–flocculation-sedimentation practices are essential pretreatments for many water purification systems—especially filtration treatments. These processes agglomerate suspended solids together into larger bodies so that physical filtration processes can more easily remove them.
What chemicals are flocculants?
A flocculants are usually organic chemicals added to wastewater to enhance flocculation, such chemicals are alum, aluminium chlorohydrate, aluminium sulphate etc.
What is the most important step in water treatment?
It is, however, an important primary step in the water treatment process, because coagulation removes many of the particles, such as dissolved organic carbon, that make water difficult to disinfect. Because coagulation removes some of the dissolved substances, less chlorine must be added to disinfect the water.
Which are two chemicals used to purify water?
Chlorine and ozone are two chemicals used to purify water.
Is alum a coagulant or flocculant?
To accomplish this, the water is treated with aluminum sulfate, commonly called alum, which serves as a flocculant. Raw water often holds tiny suspended particles that are very difficult for a filter to catch. Alum causes them to clump together so that they can settle out of the water or be easily trapped by a filter.
Why is coagulant added to water?
Coagulant aid Chemicals (typically synthentic polymers) added to water to enhance the coagulation process. if an excess of alum is added so that the dosed water pH is less than 5.0, then the metal ions (Al3+) will directly ˜eutralize the negatively charged organic compounds and colloids in the raw water. 1.
How is chloride removed from wastewater?
At high concentrations, chloride can harm fish and plant life. But there’s no easy and affordable way to remove chloride in wastewater. It would require reverse osmosis, the same process used to produce water for laboratory use, which is technically difficult as well as costly.
How is water treated steps?
Water treatment
- Sedimentation – the water is stored in a large tank or a reservoir.
- Filtration – the water is sprayed onto specially-prepared layers of sand and gravel.
- Chlorination – chlorine gas is injected into the water to sterilise it.
Why is flocculation important?
Used water can contain significant amounts of suspended particulate matter, which often takes long to sediment. Flocculation expedites sedimentation and ensures efficient solid/liquid separation.
What makes a good flocculant?
Polymers are useful as flocculants because they are robust molecules and sometimes carry charges. Because they are so large, small particles can get trapped in the curves of the polymer causing them to accumulate a mass heavy enough to prevent their retention in solution.
What is the difference between a flocculant and a coagulant?
Depending on the charge and chemical composition of your wastewater, flocculants can either be used on their own or in combination with coagulants. Flocculants differ from coagulants in that they are often polymers, whereas coagulants are typically salts.
How can flocculation be prevented?
When particles of a suspension come close together they can form aggregates called flocculates which will settle more rapidly. To prevent that we often coat the particle with a charged surfactant. The charge (Zeta potential) acts to keep the particles separate and prevent flocculation.
Is FeCl3 a coagulant?
Ferric chloride (FeCl3) is the most common iron salt used to achieve coagulation. Its reactions in the coagulation process are similar to those of alum, but its relative solubility and pH range differ significantly from those of alum. Both alum and ferric chloride can be used to generate inorganic polymeric coagulants.
What two chemicals are commonly used as water coagulants?
Aluminum sulfate (alum) is the most common coagulant used for water purification. Other chemicals, such as ferric sulfate or sodium aluminate, may also be used.
Does flocculant affect pH?
Because flocculants can affect the pH level, you’ll want to start out with it at about 7.0 so you can make sure your sanitizer keeps working at maximum efficiency.
What is the principle of flocculation?
Coagulation – flocculation is physico-chemical process that facilitates the agglomeration of fine particles (colloids) contained in water to form a floc that can be easily filtered from water. Effluent (waste water) must be treated before it is discharged or before the water is re-used.
What is the most commonly used coagulant in water treatment?
Aluminum and iron salts are the most commonly used inorganic coagulants in the wastewater treatment settings. These include based aluminum metals (aluminum chloride, aluminum sulfate, sodium aluminate) and iron based metals (ferrous sulfate, ferric sulfate, ferric chloride) [13, 17, 18].
How does flocculation purify water?
4 Flocculation. Flocculation is a process by which a chemical coagulant added to the water acts to facilitate bonding between particles, creating larger aggregates which are easier to separate. The method is widely used in water treatment plants and can also be applied to sample processing for monitoring applications.
What does Flocculate mean?
flocculate in American English 1. to form into flocculent masses. intransitive verb. 2. to form flocculent masses, as a cloud or a chemical precipitate; form aggregated or compound masses of particles.
Can chlorination remove impurities in water?
Chlorine will first react with inorganic impurities (dissolved iron, bromine, ammonia, etc.) before reacting with the organic compounds (dissolved organic material, bacteria, viruses, etc.). The iron precipitate, in its insoluble state, can be removed by filtration process within the water treatment centre.
How do we get clean water?
Boil water, if you do not have bottled water. Boiling is sufficient to kill pathogenic bacteria, viruses and protozoa (WHO, 2015). If water is cloudy, let it settle and filter it through a clean cloth, paperboiling water towel, or coffee filter. Bring water to a rolling boil for at least one minute.
What are the four stages of water treatment?
These include: (1) Collection ; (2) Screening and Straining ; (3) Chemical Addition ; (4) Coagulation and Flocculation ; (5) Sedimentation and Clarification ; (6) Filtration ; (7) Disinfection ; (8) Storage ; (9) and finally Distribution. Let’s examine these steps in more detail.
What is the most used coagulant?
Iron and aluminium salts are the most widely used coagulants but salts of other metals such as titanium and zirconium have been found to be highly effective as well.
