Table of Contents
Coagulation is the destabilization of colloidal particles brought about by the addition of a chemical reagent called as coagulant. Flocculation is the agglomeration of destabilized particles into microfloc and after into bulky floccules which can be settled called floc.
What is the difference between coagulation and flocculation?
Coagulation: Particles that aggregate with themselves e.g. by the influence of a change in pH. Flocculation: Particles that aggregate by the use of polymers that binds them together.
What is meant by coagulation and flocculation?
Coagulation-flocculation: The use of chemical reagents to destabilise and increase the size of the particles; mixing; increasing of flog size, A physical separation of the solids from the liquid phase. This separation is usually achieved by sedimentation (decantation), flotation or filtration.
What is meant by flocculation?
Flocculation is a process by which a chemical coagulant added to the water acts to facilitate bonding between particles, creating larger aggregates which are easier to separate. The method is widely used in water treatment plants and can also be applied to sample processing for monitoring applications.
What chemicals are used in coagulation and flocculation?
The aluminum coagulants include aluminum sulfate, aluminum chloride and sodium aluminate. The iron coagulants include ferric sulfate, ferrous sulfate, ferric chloride and ferric chloride sulfate. Other chemicals used as coagulants include hydrated lime and magnesium carbonate.
Is alum a coagulant or flocculant?
To accomplish this, the water is treated with aluminum sulfate, commonly called alum, which serves as a flocculant. Raw water often holds tiny suspended particles that are very difficult for a filter to catch. Alum causes them to clump together so that they can settle out of the water or be easily trapped by a filter.
Is coagulation reversible?
Coagulation is irreversible, the proteins cannot be turned back into their liquid form.
What is an example of coagulation?
Examples of Coagulation Milk proteins coagulate to thicken the mixture that forms yogurt. Blood platelets coagulate blood to seal a wound. Pectin gels (coagulates) a jam. Gravy coagulates as it cools.
What is coagulant example?
Examples of primary coagulants are metallic salts, such as aluminum sulfate (referred to as alum), ferric sulfate, and ferric chloride. Cationic polymers may also be used as primary coagulants. 2. Chemicals commonly used for primary coagulants include aluminum or iron salts and organic polymers.
What happens during coagulation?
Tiny cells in the blood called platelets stick together around the wound to patch the leak. Blood proteins and platelets come together and form what is known as a fibrin clot. The clot acts like a mesh to stop the bleeding. Bleeding causes a biological “domino effect” in which a series of steps are set in motion.
What is the purpose of flocculation?
Effect on Turbidity As with coagulation, the purpose of flocculation is not to directly reduce turbidity or suspended solids, but to prepare the solids for subsequent removal. Flocculation reduces the number of suspended solids particles as smaller particles combine to form larger ones.
What is an example of flocculation?
Flocculation and coagulation treatment chemicals are used in effluent wastewater water treatment processes for solids removal, water clarification, lime softening, sludge thickening, and solids dewatering. Examples of ChemTreat coagulation products include aluminum salts, iron salts, and polyelectrolytes.
What is flocculant for?
Used in a wide range of industries and applications, flocculants help to remove suspended solids from wastewater by aggregating contaminants into flakes or “flocs” that float to the surface of the water or settle at the bottom. They can also be used for lime softening, sludge thickening, and solids dehydration.
What two chemicals are commonly used as water coagulants?
Aluminum sulfate (alum) is the most common coagulant used for water purification. Other chemicals, such as ferric sulfate or sodium aluminate, may also be used.
Which coagulant is used for sewage treatment?
Ferric chloride is widely used for sewage treatment and Alum is widely used for water treatment.
Why is coagulation flocculation necessary?
Coagulation and flocculation are used to separate the suspended solids portion from the water. Suspended particles vary in source, charge, particle size, shape, and density. Coagulation and flocculation occurs in successive steps, allowing particle collision and growth of floc.
What are the side effects of alum?
If experienced, these tend to have a Severe expression i fluid accumulation around the eye. throat swelling. a feeling of throat tightness. a skin ulcer. hives. a shallow ulcer on the skin. fainting. puffy face from water retention.
Is alum positive or negative?
For example, the colloidal particles are negatively charged and alum is added as a coagulant to create positively charged ions. Once the repulsive charges have been neutralized (since opposite charges attract), van der Waals force will cause the particles to cling together (agglomerate) and form micro floc.
Does alum increase pH?
Ionic species present in alum solutions are highly dependent on the degree of reaction with hydroxyl ions. It is tempting to say that “the composition is pH-dependent.” However, in the vicinity of pH=4.3 the composition of alum solutions changes a great deal with very little change in pH.
What are the 4 steps of coagulation?
1) Constriction of the blood vessel. 2) Formation of a temporary “platelet plug.” 3) Activation of the coagulation cascade. 4) Formation of “fibrin plug” or the final clot.
What causes coagulation?
Blood Clot Formation When you cut or injure yourself, your body stops the bleeding by forming a blood clot. Proteins and particles in your blood, called platelets, stick together to form the blood clot. The process of forming a clot is called coagulation.
Is coagulation good or bad?
Blood clotting is a natural process; without it, you would be at risk of bleeding to death from a simple cut. Blood clots inside the cardiovascular system are not always so welcome. A clot in the coronary arteries near the heart can cause a heart attack; one in the brain or the arteries serving it, a stroke.
What are the 3 types of protein coagulation?
Coagulation can occur in a few different ways: enzyme action, acid addition, or acid/heat addition. These three processes will be the foci of this post.
What is egg coagulation?
Coagulation indicates a change from a fluid to a solid or semisolid (gel) state. The success of many cooked foods depends on the coagulative properties of proteins, particularly the irreversible coagulative properties of egg proteins. Egg proteins denature and coagulate over a wide temperature range.
What you mean by coagulation?
Coagulation: In medicine, the clotting of blood. The process by which the blood clots to form solid masses, or clots. More than 30 types of cells and substances in blood affect clotting. The process is initiated by blood platelets.
