Table of Contents
Coagulation is a chemical process and flocculation is a physical process, In coagulation, the process involves the utilization of a coagulant that has the ability to destabilize the charged particles which are not settleable whilst flocculation involves a similar destabilization process that is achieved through Dec 10, 2017
What’s the difference between coagulation and flocculation?
Flocculation is synonymous with agglomeration and coagulation / coalescence. Basically, coagulation is a process of addition of coagulant to destabilize a stabilized charged particle. Meanwhile, flocculation is a mixing technique that promotes agglomeration and assists in the settling of particles.
What is meant by coagulation and flocculation?
Coagulation-flocculation: The use of chemical reagents to destabilise and increase the size of the particles; mixing; increasing of flog size, A physical separation of the solids from the liquid phase. This separation is usually achieved by sedimentation (decantation), flotation or filtration.
What are the side effects of alum?
If experienced, these tend to have a Severe expression i fluid accumulation around the eye. throat swelling. a feeling of throat tightness. a skin ulcer. hives. a shallow ulcer on the skin. fainting. puffy face from water retention.
What is an example of coagulation?
Examples of Coagulation Milk proteins coagulate to thicken the mixture that forms yogurt. Blood platelets coagulate blood to seal a wound. Pectin gels (coagulates) a jam. Gravy coagulates as it cools.
Is alum a coagulant or flocculant?
To accomplish this, the water is treated with aluminum sulfate, commonly called alum, which serves as a flocculant. Raw water often holds tiny suspended particles that are very difficult for a filter to catch. Alum causes them to clump together so that they can settle out of the water or be easily trapped by a filter.
Is alum positive or negative?
For example, the colloidal particles are negatively charged and alum is added as a coagulant to create positively charged ions. Once the repulsive charges have been neutralized (since opposite charges attract), van der Waals force will cause the particles to cling together (agglomerate) and form micro floc.
Is na2so4 a coagulant?
Sodium sulfate is a well-known coagulant for PVA, and it is used in the coagulation bath of PVA before wet spinning of vinylon fibers.
Does alum increase pH?
When the alum dose is increased, the pH decreases. Thus, the alum dose and pH are linked (Gone et al., 2008) . For alum coagulation, it is a concern because alum can be toxic to aquatic species due to decreasing pH.
Which coagulant is used for sewage treatment?
Ferric chloride is widely used for sewage treatment and Alum is widely used for water treatment.
What is the function of coagulant?
What are coagulants used for? In water treatment, coagulants are used to remove a wide variety of hazardous materials from water, ranging from organic matter and pathogens, to inorganics and toxic materials, like arsenic, chemical phosphorous and fluoride.
How does coagulation work in food?
The proteins in the egg start to thicken, a process known as coagulation. As the meat is heated, the proteins coagulate and shrink. The heat causes the muscles fibres to lose water, solidifying them. If the meat is cooked for too long the meat can become chewy.
What two chemicals are commonly used as water coagulants?
Aluminum sulfate (alum) is the most common coagulant used for water purification. Other chemicals, such as ferric sulfate or sodium aluminate, may also be used.
How much does coagulation and flocculation cost?
The three main types of coagulants are inorganic electrolytes (such as alum, lime, ferric chloride, and ferrous sulfate), organic polymers, and synthetic polyelectrolytes with anionic or cationic functional groups. GW TECHNOLOGY: Precipitation/Coagulation/Flocculation COST PER THOUSAND GALLONS PER YEAR $41 $17.
What is coagulant example?
Examples of primary coagulants are metallic salts, such as aluminum sulfate (referred to as alum), ferric sulfate, and ferric chloride. Cationic polymers may also be used as primary coagulants. 2. Chemicals commonly used for primary coagulants include aluminum or iron salts and organic polymers.
What happens during coagulation?
Blood clots and coagulation Blood vessels shrink so that less blood will leak out. Tiny cells in the blood called platelets stick together around the wound to patch the leak. Blood proteins and platelets come together and form what is known as a fibrin clot. The clot acts like a mesh to stop the bleeding.
What are the 3 types of protein coagulation?
Coagulation can occur in a few different ways: enzyme action, acid addition, or acid/heat addition. These three processes will be the foci of this post.
What is an example of flocculation?
Flocculation and coagulation treatment chemicals are used in effluent wastewater water treatment processes for solids removal, water clarification, lime softening, sludge thickening, and solids dewatering. Examples of ChemTreat coagulation products include aluminum salts, iron salts, and polyelectrolytes.
What is the difference between flocculation and precipitation?
Flocculation is the process of formation of solid aggregates from small particles. Precipitation is the process of formation of an insoluble solid mass. The main difference between flocculation and precipitation is that flocculation forms floccules whereas precipitation forms precipitates.
What are natural coagulants?
They are mainly composed of polymers of natural origin extracted from plants, algae or animals. Among these are polysaccharides and water soluble substances that act as coagulation and / or flocculation agents.
Why is coagulation?
Coagulation factors are proteins in the blood that help control bleeding. You have several different coagulation factors in your blood. When you get a cut or other injury that causes bleeding, your coagulation factors work together to form a blood clot. The clot stops you from losing too much blood.
What comes first coagulation or flocculation?
Conventional plants separate coagulation (or rapid-mix) stage from flocculation (or slow-mix) stage. These stages are followed by sedimentation, and then filtration. Plants designed for direct filtration route water directly from flocculation to filtration. These systems typically have a higher raw-water quality.
What is meant by flocculation?
Flocculation is a process by which a chemical coagulant added to the water acts to facilitate bonding between particles, creating larger aggregates which are easier to separate. The method is widely used in water treatment plants and can also be applied to sample processing for monitoring applications.
What is the best coagulant?
Chemical Coagulants Used In Water Treatment Aluminum Sulfate (Alum) – One of the most commonly used water treatment chemicals in the world. Aluminum Chloride – A second choice to Alum as it is more expensive, hazardous and corrosive. Polyaluminum Chloride (PAC) & Aluminum Chlorohydrate (ACH).
What coagulation means?
Coagulation: In medicine, the clotting of blood. The process by which the blood clots to form solid masses, or clots. More than 30 types of cells and substances in blood affect clotting. The process is initiated by blood platelets. The blood cells and plasma are enmeshed in the network of fibrils to form the clot.
