Table of Contents
“Counter-depth” is the distance between your kitchen wall or backsplash and the front of your countertops, which is typically 24–25 inches. A counter-depth appliance is designed to match the depth of countertops, so that the front of the appliance aligns with the edge of the countertop.
What is counter depth refrigerator size?
Most counter-depth fridge dimensions top out with a depth of around 30 inches. By contrast, traditional refrigerators can be as deep as 36 inches. To make up for the shallower depth measurement, standard counter-depth fridge dimensions tend to be wider (around 36 inches).
What is counter-depth standard?
Countertop depth standard measure is 25 ½ inches, though this varies based on appliance depths, room size, base cabinet size, and the backsplash details. Having a standard depth countertop helps maximize your space and enhances the look of your kitchen.
What is the difference between full depth and counter-depth?
Standard depth refrigerators take up more space, generally running 30 to 34 inches in depth, or 35 to 36 inches when the doors and handles are included. Counter depth refrigerators are shallower and wider than standard depth refrigerators, with a depth range of 23 to 27 inches.
What is the difference between counter-depth and regular refrigerator?
Counter depth refrigerators tend to be shallower than standard depth but they generally will be wider or taller. This unit typically is 23 to 27 inches deep; the shallower depth makes it easier to grab items near the back of the fridge and provides a blended look with it’s surroundings.
Do you lose space with a counter-depth refrigerator?
By shaving off a few inches, counter depth refrigerators offer a shallower build than their standard depth counterparts. However, the disadvantage to this is that you lose some interior space and will have less storage capacity for food items.
How do you measure countertops?
To measure your countertops, start by measuring the length of all counter tops, base cabinets, and island. Also include the inches of back splash. Now measure the width of the counter tops and multiply the total length of the counter tops by the width in inches.
Is counter-depth deeper than standard?
The distance from your backsplash to the front of your kitchen counters is one way to gauge your “counter-depth.” To fit within this space, counter-depth fridges are shallower than a standard-depth fridge, with a typical range of 23 to 27 inches deep.
What height are counters?
Kitchen – The standard kitchen counter height is 36 inches (3 feet) above the floor. Kitchen islands designed for bar-style seating can climb as high as 42 inches.
Why is counter-depth expensive?
Counter-depth refrigerators are less popular than standard-depth refrigerators, which can impact the unit-level price. Manufacturers often use thicker, more expensive insulation materials to maximize interior space. This contributes to their higher price.
What refrigerator has the smallest depth?
Above: The Liebherr 36-Inch Counter-Depth 4-Door French Door Refrigerator (CBS2082) is the most shallow on our list at 24 inches deep.
How old do refrigerators last?
Most refrigerators are designed to last between 10 and 20 years. If you’re having any of the other problems on this list and the fridge is over ten years old, you’ll probably save more money in the long run by simply replacing it. Otherwise, you could sink money into repairs for a fridge that’s already on its way out.
Are counter depth refrigerators wider?
With a refrigerator depth between 23 to 27 inches, counter-depth fridges are typically wider and taller than standard-depth fridges to compensate for the reduced volume and to be more space-efficient. Counter-depth units usually have French doors or side-by-side doors.
What is the standard depth of kitchen cabinets?
Depth- 12-24 inches. Standard wall cabinets are generally 24 inches in depth.
What is a zero clearance refrigerator?
A zero clearance refrigerator is designed to have a zero clearance hinge. This means the fridge’s door will open without a gap between the door and the fridge.
What are standard countertop dimensions?
Countertop Width Standards Most homes are fitted with kitchen countertops that measure 25.5 inches in width (from the wall to the edge of the counter), with some measuring up to 28 inches. Standard measurements allow for a 1.5-inch overhang over 24-inch deep base cabinets.
What is difference between counter-depth and standard?
The main difference between counter depth and standard depth refrigerators is dimension. Counter depth fridges are shallower to achieve a built-in appearance while standard fridges generally offer more capacity. The right refrigerator can open the doors to reimagining your every meal.
What is the thickness of a countertop?
The industry standard thickness for kitchen, bathroom, and other countertop surfaces in natural stone is 1.25 inches. This thickness provides the strength and stability required to create an unbroken surface without the need for stabilizing it with a plywood backing.
What is the standard height and depth of a kitchen counter?
(Standard kitchen counter height and depth is generally 36″ high and 25″ deep.).
What is the height between countertop and cabinets?
“The standard distance is 18 inches” from the top of the counter to the bottom of the wall cabinet, Scott says. “But we subscribe to the Scandinavian design aesthetic, and we often put cabinets higher—say, 24 inches above the counter, or even more. That creates a sense of openness and light.”Mar 22, 2018.
