Table of Contents
Your counter-depth measurement should be about 24-25 inches. This dimension is equivalent to the depth of the refrigerator box, excluding the refrigerator doors and handles.
What is standard depth vs counter-depth?
A kitchen’s counters are typically between 24 and 25 inches deep, meaning that standard-depth fridges will stick out from the edge of your countertops by 5 to 10 inches.
What is the counter-depth?
“Counter-depth” refers to the distance between the front of your kitchen countertops and your back wall or backsplash. These refrigerators are usually 24–30-inches deep, shallower than most fridges, to line up with the end of your cabinets and fit in nicely with most modern kitchen designs.
What is standard refrigerator depth?
In contrast, most full-size standard-depth refrigerators are more than 30 inches deep, commonly in the 35- to 36-inch range. This means a traditional refrigerator may jut out more than six inches from the edge of the countertop.
How far should a refrigerator stick out from cabinets?
In short, the answer is yes. Your fridge will need about two inches of space away from the wall in the back to allow for air circulation. On the sides, you’ll want your fridge to have about 1/8 inch for a standard fridge and about 1 inch on each side for cabinet depth.
How much space do you lose with a counter-depth refrigerator?
By combining counter depth styling and 25 cu. ft. of capacity, you no longer have to sacrifice space to take home the style you want. Counter depth styling gives you an extra 5″ of kitchen space, while fitting virtually flush with your current counters and other kitchen fixtures.
What is the difference between counter-depth and regular refrigerator?
Counter depth refrigerators tend to be shallower than standard depth but they generally will be wider or taller. This unit typically is 23 to 27 inches deep; the shallower depth makes it easier to grab items near the back of the fridge and provides a blended look with it’s surroundings.
What is standard counter height?
Kitchen – The standard kitchen counter height is 36 inches (3 feet) above the floor. Kitchen islands designed for bar-style seating can climb as high as 42 inches.
How far is too far for a refrigerator to stick out?
Standard refrigerators are typically 32 to 36 inches deep or more, and since countertops are normally about 25 inches deep (24 inches for the base cabinet with a 1-inch overhang) this means that a standard refrigerator will stick out from adjoining countertops by 6 inches or more.
How is refrigerator depth measured?
Measure the depth from the back wall to the front edge of your counters. If you have an island in your kitchen, measure the distance between the island and the counters adjacent to the refrigerator to ensure clearance during delivery.
What refrigerator has the smallest depth?
Above: The Liebherr 36-Inch Counter-Depth 4-Door French Door Refrigerator (CBS2082) is the most shallow on our list at 24 inches deep.
Why are counter depth refrigerators more expensive?
To achieve the same capacity as a standard appliance, a shallower counter-depth appliance needs to be considerably wider. This can mean a reduction in countertop space, as well as a wider door that requires a larger swing radius. And this special design may cost more than a standard appliance.
What is the depth of a typical kitchen counter?
While the standard kitchen countertop depth is 25 ½ inches, most kitchen island countertops can go up to 27 or 28 inches deep and over 30 inches deep if it comes with a breakfast bar.
Are counter depth refrigerators too small?
Because counter-depth fridges are shallower than standard ones, they tend to offer less cubic feet of interior food storage space. Standard fridge/freezer combos average between 22 and 31 cubic feet of space, while baseline counter-depth fridges are between 20 and 23 cubic feet. Shallower depth can be limiting.
What size cabinet goes above a fridge?
In standard kitchens, the wall cabinets are typically 30 or 36 inches tall, with the space above enclosed by soffits. Where the cabinets run all the way to the ceiling, 48-inch cabinets are the logical choice. A 12-inch or 15-inch tall cabinet fits neatly over a refrigerator.
How many inches is counter height?
A counter-height table runs about 34 to 36 inches tall, and standard dining-height tables range from 28 to 30 inches tall.
How tall should stools be for a 36 inch counter?
Counter stool height: Countertops range from 36 to 39 inches, so you’ll need a counter stool that ranges from 24 to 26 inches high. Bar stool height: Bar tops are usually around 40 to 42 inches high, so opt for a bar stool about 28 to 30 inches tall.
How many cm is counter height?
Counter height stool measurements The standard height for most counter height stools is between 65cm – 75cm. Ensure when pairing with a kitchen counter, the measurement from the top of the counter stool to the underside of the surface is between 15cm and 25cm.
Will a 36 inch refrigerator fit in a 36 inch opening?
Usually! A 36″ refrigerator is designed to fit into a 36″ finished opening!! A 36 inch wide refrigerator should only be placed in an opening at least as wide as the manufacturer’s recommendation. Remember that appliances are NOT built to machine-shop tolerances and neither are cabinets.
Which counter-depth refrigerator has the most space?
KitchenAid KFRC704 KitchenAid model KRFC704’s massive 23.8 capacity is one of the largest available in a counter-depth refrigerator and actually rivals capacities of many standard depth options.
