Table of Contents
Trim on a home’s exterior typically includes the material that edges the windows and doors, the fascia board that runs along the lower edge of the roof and the soffits beneath the roof. Depending on the style of your home, your trim could include more elements, like a horizontal trim board that runs beneath the fascia.
What is a trim on a house?
Trim is the material used to encase windows and doors, among other features, on a home’s exterior. Fascia is a horizontal or angled board that encloses the edge or face of the projecting eaves.
What is considered trim on a house interior?
Interior trim—the molding or millwork used to frame windows, doors, walls, floors, even ceilings—helps define the architectural style of a room. It’s also an inexpensive way to transform the look of a space.
Where does trim go on House?
Trim should be placed in essentially every location where two surfaces join or change direction. Depending on the complexity of the exterior of a home, trim can frame out many types of surface. The most common uses for trimming are: Between roof fascia and soffit.
What are the types of trim?
15 Types of Trim You Should Know of 15. Crown Molding. Given its name, it’s no surprise that crown molding is the king (or queen!) of trim. of 15. Baseboard. of 15. Chair Rail. of 15. Picture Rail. of 15. Picture Frame Molding. of 15. Panel Molding. of 15. Door or Window Trim (Casing) of 15. Pierced Molding.
What is exterior trim called?
Fascia, frieze, rake, barge, soffit, boxend and gutters are the most common exterior trim terms you’ll hear.
What is the trim on walls called?
A wall trim — also called interior trim — is a general term often used to describe all types of molding and millwork. It is used to frame windows, doors, walls, floors, even ceilings — defining the architectural style of a room.
Are baseboards considered trim?
Baseboard is the wood (or other material) board that runs between the floor and the wall. Trim is a broad term that encompasses baseboard and other trim throughout the home.
What is interior window trim called?
Casing: Trim used around door and window openings. Exterior casing trims the exterior of windows and doors. Interior casing trims the interior perimeters of windows and doors.
Does trim include doors?
The word “trim” refers to almost every applied decorative element you can think of, including baseboard, door and window casings, chair rail, picture rail, crown molding, pediments, pilasters, columns, ceiling medallions, corbels, spandrels, mantels, and fireplace surrounds.
Do modern houses have trim?
According to Cole, the more modern the home, the less trim you will see inside. Baseboards and shoe molds can be seen throughout these houses, but rarely will they have crown molding.
Do you paint the side of exterior trim?
Since most siding is butted right upto the door casing, and the siding is often caulked into the casing, painting only the face of the trim is the only way to produce a neat and straight line.
What are the four types of molding?
Casting, injection molding, blow molding, compression molding and rotational molding have different uses and advantages in plastic manufacturing. Plastic Molding Using Casting. Injection Molding of Plastic. Blow Molding Plastic Manufacturing. Compression Molding of Plastic. Rotational Molding of Plastic.
What is the difference between molding and trim?
This is a common question, and the answer is pretty simple. TRIM is a general term that refers to all molding in a home (i.e. window casing, door casing, baseboards, etc.). MOLDING (or moulding) is a broad classification of millwork (any type of woodwork that is produced in a mill …May 8, 2019.
What is the most popular baseboard trim?
One of the most commonly used residential baseboards are the three inch rounded or stepped baseboards. This is because the top of the baseboard tapers off to give a softer more decorative corner. While still mildly decorative it is one of the less expensive options, due to its popularity.
What is a common name for exterior moldings?
Automotive molding or car body molding are decorative and protective moldings on the car body. The term applies both to the detail and the material. Car moldings include side body molding, lower body molding, door moldings, window moldings, footrest molding, mudflaps, etc.
What is exterior fascia?
Exterior fascia is a specific type of trim featured on some regions of the home’s exterior. Fascia is typically a single board or band that fits just below the roof’s edge, covering the vertical surface between the roof and the soffit.
What should I use for exterior trim?
Exterior Wood Trim Douglas Fir. Doug Fir is one of the most widely used of all the exterior wood trim materials. Redwood. Redwood is a great wood trim. Western Red Cedar. Cedar rivals redwood in weather and insect deterrents. Primed Fascia. Specialty Wood Trim Products.
What is woodwork on walls called?
Wainscoting is a type of panel molding that lines a room for decorative purposes, typically the lower portion of a wall. You might see the wainscoting wall panels made up of shiplap, beadboard, board and batten or a raised or flat paneling.
What is decorative molding called?
Moulding (also spelled molding in the United States though usually not within the industry), also known as coving (United Kingdom, Australia), is a strip of material with various profiles used to cover transitions between surfaces or for decoration.
What is wall moulding?
By definition, a molding is simply a strip of wood (or, occasionally, of plaster or other material) that is used for finish or decorative purposes. In addition to the cornice and baseboard, the terms picture rail and chair rail refer to where certain moldings are located on a wall.
What is baseboard trim called?
In architecture, a baseboard (also called skirting board, skirting, wainscoting, mopboard, floor molding, or base molding) is usually wooden or vinyl board covering the lowest part of an interior wall.
Are baseboards and door trim the same?
Door casing, or trim molding, is the decorative edge around a door frame. Door and window trim are usually the same within a room. This creates a visual flow and helps the aesthetics of the room. Baseboard is the decorative trim around the base of walls in rooms, hallways, and foyers.
When painting what is considered trim?
When you’re painting a room, you’re presented with two different surfaces that are painted differently, as well. The walls are broad and flat and usually are painted with a roller. The trim is narrow; you need to use a brush. Not only that, the two surfaces usually receive different colors.
