Table of Contents
“Counter-depth” refers to the distance between the front of your kitchen countertops and your back wall or backsplash. These refrigerators are usually 24–30-inches deep, shallower than most fridges, to line up with the end of your cabinets and fit in nicely with most modern kitchen designs.
What size is considered counter-depth?
Your counter-depth measurement should be about 24-25 inches. This dimension is equivalent to the depth of the refrigerator box, excluding the refrigerator doors and handles. Keep in mind that refrigerators need some breathing room on all sides to run efficiently.
What’s the difference between counter-depth and standard depth?
Standard Depth: Which Refrigerator is Right For You? The main difference between counter depth and standard depth refrigerators is dimension. Counter depth fridges are shallower to achieve a built-in appearance while standard fridges generally offer more capacity.
How deep is a non counter-depth refrigerator?
If you’ve shopped for appliances lately, chances are you’ve encountered rows of standard-depth refrigerators. These models can range in depth from 30 to 34 inches in depth, compared to the 23 to 27 inches seen with counter-depth refrigerators.
What is the difference between counter-depth and full depth refrigerator?
Standard depth refrigerators take up more space, generally running 30 to 34 inches in depth, or 35 to 36 inches when the doors and handles are included. Counter depth refrigerators are shallower and wider than standard depth refrigerators, with a depth range of 23 to 27 inches.
How far should your fridge stick out?
In short, the answer is yes. Your fridge will need about two inches of space away from the wall in the back to allow for air circulation. On the sides, you’ll want your fridge to have about 1/8 inch for a standard fridge and about 1 inch on each side for cabinet depth.
How far is too far for a refrigerator to stick out?
Standard refrigerators are typically 32 to 36 inches deep or more, and since countertops are normally about 25 inches deep (24 inches for the base cabinet with a 1-inch overhang) this means that a standard refrigerator will stick out from adjoining countertops by 6 inches or more.
How much space do you lose with a counter-depth refrigerator?
By combining counter depth styling and 25 cu. ft. of capacity, you no longer have to sacrifice space to take home the style you want. Counter depth styling gives you an extra 5″ of kitchen space, while fitting virtually flush with your current counters and other kitchen fixtures.
What refrigerator has the smallest depth?
Above: The Liebherr 36-Inch Counter-Depth 4-Door French Door Refrigerator (CBS2082) is the most shallow on our list at 24 inches deep.
Do you lose space with a counter-depth refrigerator?
By shaving off a few inches, counter depth refrigerators offer a shallower build than their standard depth counterparts. However, the disadvantage to this is that you lose some interior space and will have less storage capacity for food items.
Why are counter depth refrigerators more expensive?
To achieve the same capacity as a standard appliance, a shallower counter-depth appliance needs to be considerably wider. This can mean a reduction in countertop space, as well as a wider door that requires a larger swing radius. And this special design may cost more than a standard appliance.
How deep are kitchen cabinets?
A standard base cabinet should be 24 inches or 61 cm in depth. Since refrigerator manufacturers now make deeper fridges, it directly creates a need for deeper countertops or cabinets. If your kitchen isn’t too large, there are base cabinets as small as 12 inches in depth which can fit into tiny spaces in the kitchen.
Are counter-depth fridges wider?
Counter depth refrigerators tend to be shallower than standard depth but they generally will be wider or taller. This unit typically is 23 to 27 inches deep; the shallower depth makes it easier to grab items near the back of the fridge and provides a blended look with it’s surroundings.
What is Sabbath mode on a refrigerator?
Sabbath Mode allows you to open and close the refrigerator or freezer doors without activating interior lights, sounds or other controls.
How much space should be between kitchen island and counter?
Distance Between Island and Counter Recommended distance between kitchen work areas, which can include both perimeter countertops and kitchen islands: 42 inches minimum in a single-cook kitchen. 48 inches minimum in a kitchen where more than one cook may be working.
How far should a refrigerator be from the back wall?
The refrigerator will need minimum clearances of 2-inches from the back wall, 1-inch from the upper cabinet and 1/8-inch on either side of the fridge. Subtract the minimum clearance from initial space measurements to find the maximum dimensions of the refrigerator models you can consider.
Will a 36 inch refrigerator fit in a 36 inch opening?
Usually! A 36″ refrigerator is designed to fit into a 36″ finished opening!! A 36 inch wide refrigerator should only be placed in an opening at least as wide as the manufacturer’s recommendation. Remember that appliances are NOT built to machine-shop tolerances and neither are cabinets.
How much space should be between fridge and wall?
Space Between Refrigerator and Side Wall You should allow for a ½ inch to 1 inch of extra space between the refrigerator and side walls. Allow the same amount of clearance at the top. The refrigerator distance from the back wall should be a bit more, about 1 to 2 inches.
