Table of Contents
Most codes require at least 15 inches (measured from the center of the toilet) from any side wall or obstruction and not closer than 30 inches center to center to any other sanitary fixture. (The NKBA actually recommends 32 inches.) There should be at least 24 inches of clear space in front of a toilet or bidet.
How much space do you need between a toilet and vanity?
Toilet placement A toilet should have some elbow room between it and another fixture or vanity. The NKBA’s recommendation is at least 18″. Codes allow a minimum distance of 15″.
What is the smallest space for a toilet?
The Minimum Space Needed for a Toilet A minimum distance from the centerline of the toilet to the side wall of 15 inches. When designing a toilet compartment, you must provide a floor space that is 30 inches wide and 60 inches long.
How far from a wall should a toilet be?
The standard distance from the back wall is 12 inches, or 12-1/2 inches from the center of the flange to the wall framing. Minimum distance in front of the toilet to the facing wall or fixture is 21 inches.
How wide should a toilet space be?
When designing the area your toilet will sit, you must provide a floor space that is at least 30 inches wide and 60 inches long. A minimum spacing between the center of adjacent fixtures of 30 inches. This code has to do with other fixtures near the toilet, things like a bidet.
How much space do you need around a toilet room?
Toilet Compartment Recommendations The size for a separate toilet compartment should be at least 36×66 inches with a swing-out or pocket door. Code Requirement: The minimum size for a separate toilet compartment is 30×60 inches.
What is a rimless toilet?
A rimless toilet has a design that doesn’t feature a rim around the inside of the toilet bowl, and this is the one advantage that boosts its hygiene quotient. It prevents any possible build-up of disease-causing bacteria and limescale.
How much space do you need around a toilet UK?
The toilet and bidets must have a minimum space of 70cm in width and 120cm in length. If they are next to a wall, the minimum free space should be 20cm, and if there is an element on their side, they should not be placed less than 15cm away for greater usability.
How close can toilet be to bathtub?
It is recommended that the distance from the centerline of a toilet and/or bidet to any bath fixture, wall, or other obstacle should be at least 18 inches. The minimum distance from the centerline of a toilet and/or bidet to any bath fixture, wall, or other obstacle is 15 inches.
How do I know if my toilet is a 10 or 12 rough?
If the old toilet is still there, measure from the center of the capped bolts (on the bottom) to the wall (not the baseboard). There should be 24 inches of clearance from the wall facing the bowl and 15 inches on each side as a guideline. If your measurements are between 11.5 and 12.5 inches, it is a 12-inch rough-in.
How far should toilet flange be above finished floor?
Check the Flange Height With the toilet removed, you can see the toilet flange and measure its height above the floor. The optimum flange height to aim for is 1/4 inch above the finished floor. This typically allows for almost any type of wax ring to be used and still ensure a good seal.
How far should a toilet flange be from the side wall?
Fifteen inches is the minimum distance from the toilet flange to any sidewall or nearby fixture. You can add more space if you want, but 15” is the very minimum. This means the toilet flange should be at least 15” from the vanity, the shower, the tub, and both the back and side walls.
Can you replace a 10 inch rough in toilet with a 12 inch rough in toilet?
The rough-in for your bathroom plumbing should match the rough-in for the toilet. Even if a toilet is designed for a 10-inch rough-in, you can still install it in a space with a 12-inch rough-in.
Do rimless toilets splash more?
Advantages of rimless toilets Because of this, rimless toilets are also much easier to clean and maintain as opposed to standard toilets. Moreover, their direct-flush mechanism does not cause water to splash about. This makes your entire bathroom much more hygienic.
Is a rimless toilet worth it?
Are Rimless Toilets Worth The Money? As they make for significantly easier cleaning, use less water and work more efficiently than their rimmed counterparts, the short answer is yes, they are worth the money.
Is AquaBlade better than rimless?
When compared with the leading rimless toilets, this beautifully smooth design also greatly reduces splashing during the flushing process; therefore less bacteria cross-contamination occurs as fewer bacteria particles are released into the air upon flushing of an AquaBlade WC.
How much space do you need for a toilet in a bathroom UK?
In the UK the minimum toilet room size is 70cm x 130cm. While it is possible to make this work (especially if you’re only in need of a toilet and a basin), we recommend that your bathroom layout makes room for at least an 80cm x 140cm downstairs toilet.
How close to a wall can a toilet be UK?
If the toilet is situated on a branch drain, it cannot be upstream from the sink or shower. The minimum side distance allowed from the centre of the toilet bowl to a wall is 15 inches 12 inches to a bathtub, and clearance from the front of a bowl to a wall or fixture should be 21 inches.
How much room do you need for a downstairs toilet?
The minimum size for a downstairs toilet is 70cm wide x 130cm long. However, to make it a functional and comfortable space, you ideally want to be working with a footprint of 80cm x 140cm; in either instance the door would typically have to open outward.
