Table of Contents
Coagulation is a process used to neutralise charges and form a gelatinous mass to trap (or bridge) particles thus forming a mass large enough to settle or be trapped in the filter.
Why is coagulation flocculation necessary?
Coagulation and flocculation are used to separate the suspended solids portion from the water. Suspended particles vary in source, charge, particle size, shape, and density. Coagulation and flocculation occurs in successive steps, allowing particle collision and growth of floc.
Is coagulation required?
It is, however, an important primary step in the water treatment process, because coagulation removes many of the particles, such as dissolved organic carbon, that make water difficult to disinfect. Because coagulation removes some of the dissolved substances, less chlorine must be added to disinfect the water.
Is coagulation the same as clotting?
Coagulation, also known as clotting, is the process by which blood changes from a liquid to a gel, forming a blood clot. It potentially results in hemostasis, the cessation of blood loss from a damaged vessel, followed by repair.
How is coagulation treated?
Treatment includes correction of the cause and replacement of platelets, coagulation factors (in fresh frozen plasma), and fibrinogen (in cryoprecipitate) to control severe bleeding. Heparin is used as therapy (or prophylaxis) in patients with slowly evolving DIC who have (or are at risk of) venous thromboembolism.
What are the three phases of coagulation?
The three phases of coagulation occur on different cell surfaces: Initiation on the tissue factor-bearing cell; Amplification on the platelet as it becomes activated; and Propagation on the activated platelet surface. Based on our work and that of many other workers, we have developed a model of coagulation in vivo.
Why does my blood coagulate so fast?
Smoking, overweight and obesity, pregnancy, use of birth control pills or hormone replacement therapy, cancer, prolonged bed rest, or car or plane trips are a few examples. The genetic, or inherited, source of excessive blood clotting is less common and is usually due to genetic defects.
Is na2so4 a coagulant?
Sodium sulfate is a well-known coagulant for PVA, and it is used in the coagulation bath of PVA before wet spinning of vinylon fibers.
Is FeCl3 a coagulant?
Ferric chloride (FeCl3) is the most common iron salt used to achieve coagulation. Its reactions in the coagulation process are similar to those of alum, but its relative solubility and pH range differ significantly from those of alum. Both alum and ferric chloride can be used to generate inorganic polymeric coagulants.
What is an example of coagulation?
Examples of Coagulation Milk proteins coagulate to thicken the mixture that forms yogurt. Blood platelets coagulate blood to seal a wound. Pectin gels (coagulates) a jam. Gravy coagulates as it cools.
Which one is a good coagulant?
Examples of inorganic coagulants are as below: Aluminum Sulfate (Alum) – One of the most commonly used water treatment chemicals in the world. Alum is manufactured as a liquid, from which the crystalline form is dehydrated. Aluminum Chloride – A second choice to Alum as it is more expensive, hazardous and corrosive.
What is meant by coagulant?
Coagulants are a substance which cause particles in a liquid to curdle and clot together. Coagulants carry the opposite charge to the particles and therefore cause the charge to ‘destabilise’ when added to the water; resulting in the particles clinging together.
What is coagulation process?
Coagulation is the chemical water treatment process used to remove solids from water, by manipulating electrostatic charges of particles suspended in water. This process introduces small, highly charged molecules into water to destabilize the charges on particles, colloids, or oily materials in suspension.
Is alum positive or negative?
For example, the colloidal particles are negatively charged and alum is added as a coagulant to create positively charged ions. Once the repulsive charges have been neutralized (since opposite charges attract), van der Waals force will cause the particles to cling together (agglomerate) and form micro floc.
Is coagulation reversible?
Coagulation is irreversible, the proteins cannot be turned back into their liquid form.
What is the purpose of coagulation in water treatment?
Coagulation is a process for combining small particles into larger aggregates (flocs) and for adsorbing dissolved organic matter on to particulate aggregates so that these impurities can be removed in subsequent solid/liquid separation processes.
How does a coagulant work?
Coagulants work by creating a chemical reaction, eliminating negative charges that cause particles to repel each other. The action of these bubbles forces clots or flocs of particles to the water surface where they can be skimmed off. Dissolved air flotation is an alternative to sedimentation.
What is the most common used coagulant?
Aluminum sulfate (alum) is the most common coagulant used for water purification. Other chemicals, such as ferric sulfate or sodium aluminate, may also be used.
Is coagulation good or bad?
Blood clotting is a natural process; without it, you would be at risk of bleeding to death from a simple cut. Blood clots inside the cardiovascular system are not always so welcome. A clot in the coronary arteries near the heart can cause a heart attack; one in the brain or the arteries serving it, a stroke.
Is alum a coagulant or flocculant?
To accomplish this, the water is treated with aluminum sulfate, commonly called alum, which serves as a flocculant. Raw water often holds tiny suspended particles that are very difficult for a filter to catch. Alum causes them to clump together so that they can settle out of the water or be easily trapped by a filter.
What causes coagulation?
Blood Clot Formation When you cut or injure yourself, your body stops the bleeding by forming a blood clot. Proteins and particles in your blood, called platelets, stick together to form the blood clot. The process of forming a clot is called coagulation.
What are the 4 steps of coagulation?
1) Constriction of the blood vessel. 2) Formation of a temporary “platelet plug.” 3) Activation of the coagulation cascade. 4) Formation of “fibrin plug” or the final clot.
What does coagulation test for?
Coagulation tests measure your blood’s ability to clot, and how long it takes to clot. Testing can help your doctor assess your risk of excessive bleeding or developing clots (thrombosis) somewhere in your blood vessels. Coagulation tests are similar to most blood tests.
What prevents coagulation?
Anticoagulants, commonly known as blood thinners, are chemical substances that prevent or reduce coagulation of blood, prolonging the clotting time.
What is the difference between coagulant and flocculant?
Flocculants differ from coagulants in that they are often polymers, whereas coagulants are typically salts. Generally speaking, anionic flocculants are used to catch mineral particles while cationic flocculants can capture organic particles.
