Table of Contents
Coagulation and flocculation are used to separate the suspended solids portion from the water. Suspended particles vary in source, charge, particle size, shape, and density. Coagulation and flocculation occurs in successive steps, allowing particle collision and growth of floc.
What is coagulation and flocculation process?
Coagulation and flocculation are used to separate the suspended solids portion from the water. Suspended particles vary in source, charge, particle size, shape, and density. Coagulation and flocculation occurs in successive steps, allowing particle collision and growth of floc.
What is flocculation process?
Flocculation is a two-step particle aggregation process in which a large number of small particles form a small number large flocs. Step 1: Coagulation. Small particles usually carry negative surface charges that hinder aggregation and settling (1a).
What is an example of flocculation?
Flocculation and coagulation treatment chemicals are used in effluent wastewater water treatment processes for solids removal, water clarification, lime softening, sludge thickening, and solids dewatering. Examples of ChemTreat coagulation products include aluminum salts, iron salts, and polyelectrolytes.
What is the function of coagulant?
In water treatment, coagulants are used to remove a wide variety of hazardous materials from water, ranging from organic matter and pathogens, to inorganics and toxic materials, like arsenic, chemical phosphorous and fluoride.
What two chemicals are commonly used as water coagulants?
Aluminum sulfate (alum) is the most common coagulant used for water purification. Other chemicals, such as ferric sulfate or sodium aluminate, may also be used.
Is FeCl3 a coagulant?
Ferric chloride (FeCl3) is the most common iron salt used to achieve coagulation. Its reactions in the coagulation process are similar to those of alum, but its relative solubility and pH range differ significantly from those of alum. Both alum and ferric chloride can be used to generate inorganic polymeric coagulants.
What are the 4 steps of water treatment?
These include: (1) Collection ; (2) Screening and Straining ; (3) Chemical Addition ; (4) Coagulation and Flocculation ; (5) Sedimentation and Clarification ; (6) Filtration ; (7) Disinfection ; (8) Storage ; (9) and finally Distribution. Let’s examine these steps in more detail.
What does coagulation mean?
Coagulation, in physiology, the process by which a blood clot is formed. The formation of a clot is often referred to as secondary hemostasis, because it forms the second stage in the process of arresting the loss of blood from a ruptured vessel.
What is an example of coagulation?
Examples of Coagulation Milk proteins coagulate to thicken the mixture that forms yogurt. Blood platelets coagulate blood to seal a wound. Pectin gels (coagulates) a jam. Gravy coagulates as it cools.
Which is not example of coagulation?
Rubber plating and chrome tanning.
What is egg coagulation?
Think about an egg. When it is heated the runny yolk and white (albumen – which is the major source of protein) turn solid. The proteins in the egg start to thicken, a process known as coagulation. Coagulation is irreversible, the proteins cannot be turned back into their liquid form. Another example is heating milk.
What is the pH of alum?
Alum is most commonly delivered as a liquid concentration, having a solids level of 8.3% as Al2O3 or about 50% as hydrate. Alum solutions are acidic. For instance, a 1% solution has a pH of around 3. Ionic species present in alum solutions are highly dependent on the degree of reaction with hydroxyl ions.
What is difference between flocculation and Deflocculation?
The key difference between flocculation and deflocculation is that flocculation is the formation of flocs by the clumping of fine particles, whereas deflocculation is the dispersion of flocs to form a stable colloid. Flocculation refers to the formation of clumps from fine particles in a colloid.
What is coagulation process in water treatment?
Coagulation is the chemical water treatment process used to remove solids from water, by manipulating electrostatic charges of particles suspended in water. This process introduces small, highly charged molecules into water to destabilize the charges on particles, colloids, or oily materials in suspension.
What makes a good flocculant?
Polymers are useful as flocculants because they are robust molecules and sometimes carry charges. Because they are so large, small particles can get trapped in the curves of the polymer causing them to accumulate a mass heavy enough to prevent their retention in solution.
What causes coagulation?
Blood vessels shrink so that less blood will leak out. Tiny cells in the blood called platelets stick together around the wound to patch the leak. Blood proteins and platelets come together and form what is known as a fibrin clot. The clot acts like a mesh to stop the bleeding.
What is difference between alum and iron floc?
Coagulation process is important in water treatment. It is a common understanding that alum is more efficient and cheaper as compared to ferric chloride. I have used these two coagulants for the treatment of Flour Mill Wastewater. Ferric Chloride is way more superior than alum.
What are the side effects of alum?
Side effects of Alum The excessive amount of alum intake may cause breathing difficulty, facial puffiness, pricking sensation & small ulcers on the skin, chest/throat tightness, and burns rarely seen in some cases.
Is alum a coagulant or flocculant?
To accomplish this, the water is treated with aluminum sulfate, commonly called alum, which serves as a flocculant. Raw water often holds tiny suspended particles that are very difficult for a filter to catch. Alum causes them to clump together so that they can settle out of the water or be easily trapped by a filter.
What is difference between coagulation and flocculation?
Flocculation is synonymous with agglomeration and coagulation / coalescence. Basically, coagulation is a process of addition of coagulant to destabilize a stabilized charged particle. Meanwhile, flocculation is a mixing technique that promotes agglomeration and assists in the settling of particles.
What is the main function of flocculants in flocculation process?
5.3. Polymer flocculants can induce flocculation by neutralizing the surface charge of particles or by forming bridges between individual particles. The functional groups should ideally be positively charged to allow for interactions with the negatively charged microalgal cells.
Why do we use flocculation?
4 Flocculation. Flocculation is a process by which a chemical coagulant added to the water acts to facilitate bonding between particles, creating larger aggregates which are easier to separate. The method is widely used in water treatment plants and can also be applied to sample processing for monitoring applications.
How fast does flocculant work?
How Long Does It Take to Work? The beauty of flocculants is that they work fast. Your pool can be cleaned in 24 hours, whereas with a clarifier, it takes a few days for the filter to do its job.
What is the principle of coagulation?
Coagulation and flocculation are related terms describing the process of preparing colloidal materials for removing by sedimentation. Coagulation is the process used to reduce the energy forces present around particles that tend to keep them from joining together to form a larger mass.
