Table of Contents
Quickly and easily dissolves and removes tough calcium and lime deposits. Can be used on surface rust stains from bathtubs, toilet bowls, sinks, glass, chrome, fiberglass, stainless steel, humidifiers, dishwashers, washing machines and showerheads.
When should you not use CLR?
DO not use CLR on any natural stone or marble (including cultured marble), terrazzo, coloured grout (any other colour than white), any painted, coated, sealed or metallic glazed surfaces, plastics (Food grade or soft), laminates, Formica, Slate, Titanium, Rubber, Corian, aluminium, galvanized metals, nickel, oil rubbed.
How does CLR cleaner work?
Each different kind of acid in CLR is used for a specific purpose. The gluconic acid dissolves mineral deposits. Lactic acid is there to keep the moisture and liquid inside the solution and to keep it from evaporating too quickly. Glycolic acid is used to penetrate the surfaces to get deep stains lifted and removed.
How do you clean with CLR?
To use CLR Metal Clear, wearing rubber gloves, dip a damp cloth or sponge into the solution, rub briskly over the area you are cleaning, let it soak for two to three minutes and then rinse with cold water.
Does CLR cleaner really work?
5.0 out of 5 stars Great for Rust and Calcium buildup. It actually works well on rust and lime stains. Even like naval jelly on cars or faucets, etc. it is very strong so be careful when using on porcelain or cheap stainless steel.
Can I leave CLR in my toilet overnight?
It is important to not let CLR sit on the bowl for longer than two minutes, as it can cause damage to the porcelain finish. If the stains in your toilet bowl sit below the water line, then you’ll have to empty the toilet water.
Can you clean toilet with CLR?
Apply CLR Calcium, Lime & Rust Remover directly to the stains and scrub with the brush or pumice stone. Wait for 2 minutes then flush the toilet. Repeat this process as needed until the hard water stains begin to be removed.
Do you mix CLR with water?
CLR can be mixed with warm water, 1 of three ways depending on the stain. For light stains and buildup, a diluted mixture is recommended. Diluted 1 part CLR to 8 parts warm water, 50/50 with warm water and full strength.
What works better than CLR?
CLR or Lime Away? An acid-based cleaner is the best way to remove water deposits. Vinegar and lemon juice are two natural alternatives, but they just don’t work as quickly and effectively. All you need to know is that they both are made specifically for water stains and break them down well.
Will CLR remove rust from tiles?
CLR proved to be a versatile rust cleaner that nicely addressed the entire range of applications we tested.It can be used for small household appliances like coffee pots or teakettles, and also on surfaces like tile, vinyl and concrete.
Can you use CLR on shower heads?
When mineral-rich water, or hard water, evaporates, it leaves behind deposits of calcium and magnesium. Thankfully, there’s CLR® Calcium, Lime & Rust Remover to quickly and safely give you a clean showerhead once again.
How do you use CLR in a toilet?
using CLR Calcium, Lime & Rust Remover Put on rubber cleaning gloves. Turn off the water supply to the toilet. Flush the water from bowl. Pour 1 cup of CLR into bowl. Wait 2 minutes. Scrub the bowl with a toilet brush to loosen the soil. Turn the water supply back on. Flush.
Does CLR unclog shower drain?
CLR® Clear Pipes & Drains. Dissolves sources of clogs such as oil, soap scum, shampoos, conditioners, toothpaste, shaving cream and kitchen waste. Keeps drains running smoothly. Use in sinks, toilets, showers, drains, garbage disposals and grease traps.
How do you use CLR on shower glass?
Step 1: On a dry shower screen surface, spray CLR Bathroom and Kitchen directly onto your stains. Step 2: Let CLR Bathroom and Kitchen sit for up to 2-3 minutes to allow CLR to actively dissolve the stains. Step 3: Wipe your shower screen clean with a damp cloth. Step 4: Rinse thoroughly.
How do you get black stains out of toilet bowl?
Manganese Spots Turn off the water to the toilet if the black spots are at or below the water level. Mix cream of tartar and 3-percent hydrogen peroxide, slowly adding the peroxide until it forms a paste. Coat the black spots with the paste. Rinse the paste off the spots with water. Examine the toilet bowl.
How do I get brown stains out of the bottom of my toilet?
Combine half a lemon and half a cup of vinegar in a mixing bowl. Over the soiled toilet bowl, pour the mixture. Then cover the toilet lid and let it stay for 30 minutes. After that, scrub the stained area with a toilet brush.
How do you clean a badly stained toilet?
How to clean a very stained toilet bowl Pour 1 or 2 cups of white distilled vinegar into the toilet bowl. Sprinkle some baking soda. You will get a sizzling reaction. Wait about 15 minutes. Scrub the stains with your brush or pumice stone. Turn the water back on and flush.
Does CLR remove hard water stains?
CLR cleans what many household products can’t. It dissolves and removes tough stains from the build-up of calcium, limescale and surface rust from hard water.
Does CLR remove hard water stains from Windows?
You can clean water marks off of clear glass with CLR® Calcium, Lime & Rust Remover. Apply the solution using a damp cloth or sponge to the glass only. After 2 minutes, hand remove the solution from the glass using a damp cloth or sponge and clear cold water.
Can I use CLR on my kitchen sink?
The sign of a truly spotless kitchen is a glimmering kitchen sink. CLR® Bath & Kitchen Cleaner can give you that spotless kitchen because it’s the best way to clean a stainless steel sink.
