Table of Contents
How Does Ceramic Disc Technology Work? Ceramic disc cartridges are simply two ceramic discs with holes through them. One disc is fixed in place whilst the other moves with the tap handle. When both discs are in alignment, the water is allowed to flow through the tap. When they are no longer aligned, the water stops.
Are ceramic disc taps any good?
Plumbing connections for ceramic disc are no different to other taps, and with that comes all the ease of a quarter-turn technology, and a more durable, longer lasting tap without those annoying leaks. From a long-term maintenance point of view, ceramic disc taps are much better than normal taps.
Do ceramic disc taps wear out?
Ceramic disc taps are designed to last a lifetime. Unfortunately, in hard water areas they do not and it is as well to know how they operate and how to service them. It is very rare for the ceramic discs to wear out and the need to replace them is even rarer.
How long do ceramic tap washers last?
Ceramic tap washers can last years, but other types can last for as little as twelve months depending on how frequently they’re used.
What is ceramic disc faucet?
Ceramic disk faucets are the latest development in modern faucet technology. The disk faucet mixes hot and cold water inside a mixing chamber called a pressure balance cartridge. Two ceramic disks at the bottom of the chamber will raise and lower to control the volume of water flow.
Why does a ceramic disc tap leak?
Ceramic disc taps feature a cartridge within the tap that contain a pair of ceramic discs. If you do experience dripping this is usually caused by a scratched ceramic disc. In order to rectify the leak you must replace the entire cartridge as follows.
Why do tap cartridges fail?
What is a ceramic disc cartridge? It is not usually the ceramic tap cartridges themselves that fail, however, as these tap cartridges are incredibly durable and designed to last a lifetime. Rather, it is the inlet or outlet seals falling apart or the build-up of sediment within them that creates leakages.
How long do bathroom taps last?
Most generally last for 15-20 years. If yours is nearing the end of its lifespan, it might be time to consider a replacement. If your faucet constantly needs repairs. One of the most common signs that it’s time to replace your faucet is when it needs constant repairs to function.
What is the best type of tap washer?
Nylon tap washers are a popular option for sealing tap valves closed. Due to their properties, nylon spacer washers provide a reliable seal on most types of tap. Typically, nylon sealing washers are chosen for offering: High strength.
How does a disc faucet work?
Ceramic Disc Faucet Two ceramic discs regulate the flow of water: a movable upper disc turns or lifts and lowers against a fixed lower ceramic disc. The seal between the two discs is watertight because they are polished to near-perfect flatness.
What is the difference between magnetic and ceramic cartridges?
A ceramic cartridge also has a higher-level, louder electrical output, so you can feed it directly into a music system without needing any further electronic manipulation. A moving-magnet cartridge has a much softer, lower-level output so you need to amplify its signal first before it goes into the rest of the system.
What are ceramic valves?
A ceramic valve is a valve with ceramic trim, ball, seat, disc or lining. Thanks to the excellent corrosion resistance, abrasive resistance and wear resistance, ceramic valves are often used in severe corrosive and abrasive applications, such as FGD, and pneumatic refuse conveying systems.
Why is my tap leaking at the base?
When it becomes worn or cracked, water can seep down along the faucet body and out the bottom when the valve is turned on. Less commonly, leaks in this area can be caused by an inner cartridge that has become worn. If fixing the O-ring doesn’t help, you may need to replace the valve cartridge, as well.
Do ceramic taps have washers?
Nowadays, the vast majority of modern bathroom taps use ceramic disc cartridges instead of rubber washers. In simple terms, this means no (or at least far fewer) leaks, and only a 90-degree rotation to turn the tap on or off. Back in days of old, taps and shower fittings always used rubber washers to prevent dripping.
Why does my tap still drips after changing the washer?
If you’ve changed the tap washer and it’s still leaking, most likely the valve “seat” that the tap washer pushes down on is worn, allowing water to pass no matter how much you tighten it. Reseating a tap is basically grinding the seat to create a smooth flat surface to seal properly with the washer.
How do you descale a tap cartridge?
Soak the cartridge in the water and vinegar mix for around 10 minutes. If when you take it out, the cartridge still has limescale on it, it simply needs to be soaked for longer. Add a little more vinegar to the mixture, soak a cloth in it and wrap it tightly around the cartridge.
Are all tap cartridges the same?
Once you have removed the ceramic tap cartridge you will need to identify the thread size. In the UK 95% of taps are either BSP 1/2″ (Basin size) or 3/4″ (Bath size). The BSP “British Pipe Standard ” doesn’t refer to any physical dimension, which is very confusing and is why we display all the dimensions in mm.
How long should taps last?
Modern taps and faucets tend to be quite well made and can usually last around 10 years. When the finish starts wearing away and the handles become discoloured or cracked, it’s generally a warning sign that your taps washers, O-rings, screws, clips, and valve assembly might need replacing.
How long will a tap last?
The analgesic effects typically last up to 24 hours. The TAP block provides analgesia from the incisional pain in the stomach wall but does not block any pain in the internal organs in the abdomen.
