Table of Contents
BTU is short for British Thermal Unit, a unit of measurement that shows just how much energy your air conditioner uses to remove heat from your home within an hour. It may seem overly technical, but BTU is an important metric that can help you determine the kind of air conditioner you need for a home your size.
How many BTU air conditioner do I need?
As a rule of thumb, an air conditioner needs 20 Btu for each square foot of living space. But other considerations, such as the ceiling height and the size of your windows and doorways, might call for more cooling power. To measure your room, multiply the length by the width.
Is higher or lower BTU better?
A heater with a higher BTU rating is more powerful — that is, it has a higher heat output — than one with a low BTU rating. It can do more to raise the temperature in your room each hour, so you can either heat a room more quickly or heat a larger space.
What size room will a 9000 BTU air conditioner cool?
350 – 400 sq. feet: 9,000 BTUs.
How many BTU do I need for a 12×12 room?
6,000 BTU Room Type Room Size Recommended BTU 12 x 12 room 144 sq ft 6,000 BTU 12 x 24 room 576 sq ft 14,000 BTU 13 x 13 room 169 sq ft 6,000 BTU 14 x 16 room 224 sq ft 7,000 BTU.
Is 8000 BTU enough for a bedroom?
Recommended BTU By Room Size If you are looking for an air conditioner for a room measuring say 10′ x 15′ (150 square feet), the recommended BTU range is up to 5400. Once you get into 340 and 400 square feet per room, you’d need an 8,000 or 9,000 BTU air conditioner, respectively.
What size room will a 12000 BTU air conditioner cool?
12,000 BTUs will cover 400 sq. ft. (3,200 cubic feet) 13,000 BTUs will cover 450 sq.
What happens if you have too much BTU?
A unit with too many BTU’s, will cool the room fast, but leave the room humid. Too few BTU’s will never cool the room down and the unit will run incessantly.
What happens if BTU is too high?
If the BTU is too high, your room will cool too quickly and that can cause the air conditioner to cycle more often. That places a considerable amount of load on the compressor and can shorten the lifespan of the air conditioning unit.
What happens if an air conditioner is too large?
An oversized HVAC unit can make your home’s inside temperature uncomfortable. An HVAC system with excess capacity can heat or cool your home faster, but that speed often results in a couple of other issues. As a result, you could end up with a number of hot or cold spots throughout your home.
How do you calculate BTU for a house?
For example, a 300 square foot room typically requires 7,000 BTUs to maintain a comfortable temperature, while a 1,000 square foot room requires 18,000 BTUs. A simple formula to determine your heating needs is: (desired temperature change) x (cubic feet of space) x . 133 = BTUs needed per hour.
Is 9000 BTU enough for a bedroom?
Match the BTU rating to the room size Small rooms (150 square feet or below) will require a unit with around 6,000 BTUs. This is generally appropriate for a single bedroom. For larger rooms (up to 350 square feet), you will need a unit with around 9,000 BTUs. This is typical for most living rooms.
Is 6000 BTU enough for a bedroom?
If you want to properly cool down a 300 square foot area (or room), you need a 6,000 BTU air conditioner. Obviously, the problem arises when you have a tiny 12×12 room, for example. According to the US Department of Energy directive, an air conditioner’s most appropriate size would be 2,880 BTU unit.
What size air conditioner do I need for a 3000 square foot house?
The recommended capacity for a home that is 1,201 to 1,500 square feet is 2.5 tons. For a home 1,501 to 1,800, the recommended capacity is 3 tons. For a 2,000 square-foot home, the best AC capacity is 3.5 tons. Since larger homes are costlier to cool, you’ll need a 5-ton unit to cool a 3,000 square-foot home.
How do I calculate air conditioner size?
Calculate Size To calculate the size, simply multiply the length times the width of the room or area to be cooled. Then, as a practical number, multiply that total times 25 BTU. This allows ample cooling, whether it is a rainy, moist day or a hot, sunny, humid day.
How do I calculate what size air conditioner I need?
To calculate the size of the air conditioner you need for a room, first, multiply the length of the room with its width. Then multiply it with 25 BTU to get the ample cooling for the room under different weather conditions. For example, if the room is 15 feet long and 12 feet wide, it comes to 180 square feet.
Does higher BTU mean more electricity?
The more BTU your unit produces, the more energy it consumes. So, if you are worried about high energy costs, you should get a unit that is appropriate for your space.
How big of a room will a 8 000 BTU air conditioner cool?
At 8,000 BTU, it has the cooling capacity for up to about 350 square feet.
Is 12000 Btu enough for a bedroom?
A 12,000 Btu air conditioner can cool between 450 and 550 square feet of floor space. A 12,000 Btu unit could cool a room 25 feet long by 20 feet wide that has 500 square feet of floor area. Manufacturers give their own ratings as to how much room area they believe their units can cool.
